ASTM C511 - 19 Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes

    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    A981/A981M Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors

    A1096/A1096M Standard Test Method for Evaluating Bond of Individual Steel Wire, Indented or Plain, for Concrete Reinforcement

    C31/C31M Standard Practice for Making and Curing Concrete Test Specimens in the Field

    C87/C87M Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar

    C91/C91M Standard Specification for Masonry Cement

    C109/C109M Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50 mm] Cube Specimens)

    C125 Standard Terminology Relating to Concrete and Concrete Aggregates

    C151/C151M Standard Test Method for Autoclave Expansion of Hydraulic Cement

    C157/C157M Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete

    C185 Standard Test Method for Air Content of Hydraulic Cement Mortar

    C187 Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste

    C191 Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle

    C192/C192M Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory

    C266 Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles

    C270 Standard Specification for Mortar for Unit Masonry

    C305 Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency

    C441/C441M Standard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction

    C451 Standard Test Method for Early Stiffening of Hydraulic Cement (Paste Method)

    C452 Standard Test Method for Potential Expansion of Portland-Cement Mortars Exposed to Sulfate

    C490/C490M Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete

    C596 Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement

    C631 Standard Specification for Bonding Compounds for Interior Gypsum Plastering

    C672/C672M Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals

    C780 Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry

    C796/C796M Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam

    C807 Standard Test Method for Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle

    C882/C882M Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear

    C887 Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar

    C932 Standard Specification for Surface-Applied Bonding Compounds for Exterior Plastering

    C953 Standard Test Method for Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory

    C1012/C1012M Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution

    C1019 Standard Test Method for Sampling and Testing Grout for Masonry

    C1038/C1038M Standard Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water

    C1074 Standard Practice for Estimating Concrete Strength by the Maturity Method

    C1090/C1090M Standard Test Method for Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout

    C1105 Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction

    C1140/C1140M Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels

    C1222 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement

    C1260 Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)

    C1328/C1328M Standard Specification for Plastic (Stucco) Cement

    C1329/C1329M Standard Specification for Mortar Cement

    C1403 Standard Test Method for Rate of Water Absorption of Masonry Mortars

    C1437 Standard Test Method for Flow of Hydraulic Cement Mortar

    C1506 Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters

    C1567 Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)

    C1608 Standard Test Method for Chemical Shrinkage of Hydraulic Cement Paste

    C1670/C1670M Standard Specification for Adhered Manufactured Stone Masonry Veneer Units

    C1679 Standard Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry

    C1707 Standard Specification for Pozzolanic Hydraulic Lime for Structural Purposes

    C1708/C1708M Standard Test Methods for Self-leveling Mortars Containing Hydraulic Cements

    C1713 Standard Specification for Mortars for the Repair of Historic Masonry

    C1738/C1738M Standard Practice for High-Shear Mixing of Hydraulic Cement Pastes

    C1749 Standard Guide for Measurement of the Rheological Properties of Hydraulic Cementious Paste Using a Rotational Rheometer

    C1757 Standard Test Method for Determination of One-Point, Bulk Water Sorption of Dried Concrete

    C1760 Standard Test Method for Bulk Electrical Conductivity of Hardened Concrete

    C1792 Standard Test Method for Measurement of Mass Loss versus Time for One-Dimensional Drying of Saturated Concretes

    D1734 Standard Practice for Making Cementitious Panels for Testing Coatings

    D7705/D7705M Standard Test Method for Alkali Resistance of Fiber Reinforced Polymer (FRP) Matrix Composite Bars used in Concrete Construction

    D7913/D7913M Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing

    D7958/D7958M Standard Test Method for Evaluation of Performance for FRP Composite Bonded to Concrete Substrate using Beam Test

    G109 Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments

    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    C51 Terminology Relating to Lime and Limestone (as used by the Industry)

    C125 Terminology Relating to Concrete and Concrete Aggregates

    C219 Terminology Relating to Hydraulic Cement

    E77 Test Method for Inspection and Verification of Thermometers