ASTM C1175 - 99a(2010) Standard Guide to Test Methods and Standards for Nondestructive Testing of Advanced Ceramics

    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    There are currently no referencing documents for this standard.

    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    E94 Guide for Radiographic Examination

    E114 Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing

    E165 Practice for Liquid Penetrant Examination for General Industry

    E317 Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments

    E494 Practice for Measuring Ultrasonic Velocity in Materials

    E569 Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation

    E587 Practice for Ultrasonic Angle-Beam Contact Testing

    E650 Guide for Mounting Piezoelectric Acoustic Emission Sensors

    E664 Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method

    E750 Practice for Characterizing Acoustic Emission Instrumentation

    E797 Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method

    E976 Guide for Determining the Reproducibility of Acoustic Emission Sensor Response

    E999 Guide for Controlling the Quality of Industrial Radiographic Film Processing

    E1000 Guide for Radioscopy

    E1065 Guide for Evaluating Characteristics of Ultrasonic Search Units

    E1079 Practice for Calibration of Transmission Densitometers

    E1106 Test Method for Primary Calibration of Acoustic Emission Sensors

    E1165 Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging

    E1208 Practice for Fluorescent Liquid Penetrant Testing Using the Lipophilic Post-Emulsification Process

    E1209 Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process

    E1210 Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-Emulsification Process

    E1219 Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process

    E1220 Practice for Visible Penetrant Testing Using Solvent-Removable Process

    E1254 Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films

    E1255 Practice for Radioscopy

    E1316 Terminology for Nondestructive Examinations

    E1324 Guide for Measuring Some Electronic Characteristics of Ultrasonic Testing Instruments

    E1390 Specification for Illuminators Used for Viewing Industrial Radiographs

    E1411 Practice for Qualification of Radioscopic Systems

    E1441 Guide for Computed Tomography (CT) Imaging

    E1453 Guide for Storage of Magnetic Tape Media that Contains Analog or Digital Radioscopic Data

    E1570 Practice for Computed Tomographic (CT) Examination

    E1647 Practice for Determining Contrast Sensitivity in Radiology

    E1672 Guide for Computed Tomography (CT) System Selection

    E1695 Test Method for Measurement of Computed Tomography (CT) System Performance

    E1781 Practice for Secondary Calibration of Acoustic Emission Sensors

    E1817 Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs)