ASTM A276 / A276M - 17 Standard Specification for Stainless Steel Bars and Shapes
Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.
A194/A194M Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
A484/A484M Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
A580/A580M Standard Specification for Stainless Steel Wire
A582/A582M Standard Specification for Free-Machining Stainless Steel Bars
A1022/A1022M Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement
A1040 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels
A1069/A1069M Standard Specification for Laser and Laser Hybrid Welded Stainless Steel Bars, Plates, and Shapes
A1082/A1082M Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications
C341/C341M Standard Practice for Preparation and Conditioning of Cast, Drilled, or Sawed Specimens of Hydraulic-Cement Mortar and Concrete Used for Length Change Measurements
C1533 Standard Guide for General Design Considerations for Hot Cell Equipment
C1802 Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Fabricated Metal Horizontal Access Hatches for Utility, Water, and Wastewater Structures
D6783 Standard Specification for Polymer Concrete Pipe
E784 Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp
E1282 Standard Guide for Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals, Ores, and Related Materials
F593 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
F721 Standard Specification for Gage Piping Assemblies
F857 Standard Specification for Hot Water and Chemical Sanitizing Commercial Dishwashing Machines, Stationary Rack Type
F860 Standard Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Multiple Tank, Rackless Conveyor Type
F899 Standard Specification for Wrought Stainless Steels for Surgical Instruments
F917 Standard Specification for Commercial Food Waste Disposers
F953 Standard Specification for Commercial Dishwashing Machines (Stationary Rack, Dump Type) Chemical Sanitizing
F957 Standard Specification for Gong, Sound Signaling
F998 Standard Specification for Centrifugal Pump, Shipboard Use
F1018 Standard Specification for Steel Emergency Gear Stowage Locker
F1047 Standard Specification for Frying and Braising Pans, Tilting Type
F1073 Standard Specification for Door Fittings, for Watertight /Gastight /Airtight, Weathertight, and Non-Tight Doors, for Marine Use
F1114 Standard Specification for Heat Sanitizing Commercial Pot, Pan, and Utensil Stationary Rack Type Water-Driven Rotary Spray
F1138 Standard Specification for Spray Shields for Mechanical Joints
F1150 Standard Specification for Commercial Food Waste Pulper and Waterpress Assembly
F1202 Standard Specification for Washing Machines, Heat Sanitizing, Commercial, Pot, Pan, and Utensil Vertically Oscillating Arm Type
F1217 Standard Specification for Cooker, Steam
F1370 Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard
F1387 Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings
F1495 Standard Specification for Combination Oven Electric or Gas Fired
F1508 Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas, and Liquid Services
F1511 Standard Specification for Mechanical Seals for Shipboard Pump Applications
F1718 Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
F1807 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps, for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
F1899 Standard Specification for Food Waste Pulper Without Waterpress Assembly
F2080 Standard Specification for Cold-Expansion Fittings with Metal Compression-Sleeves for Crosslinked Polyethylene (PEX) Pipe and SDR9 Polyethylene of Raised Temperature (PE-RT) Pipe
F2215 Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications
F2281 Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications
F2643 Standard Specification for Powered Pot, Pan and Utensil Washing Sinks
F2854 Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing
F2891 Standard Specification for Commercial Bulk Milk Dispensers, Mechanically Refrigerated
F2929 Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig
F3184 Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion
F3215 Standard Specification for Food Waste Dehydrators
F3226/F3226M Standard Specification for Metallic Press-Connect Fittings for Piping and Tubing Systems
G32 Standard Test Method for Cavitation Erosion Using Vibratory Apparatus
G134 Standard Test Method for Erosion of Solid Materials by Cavitating Liquid Jet
Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.
A314 Specification for Stainless Steel Billets and Bars for Forging
A370 Test Methods and Definitions for Mechanical Testing of Steel Products
A484/A484M Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
A582/A582M Specification for Free-Machining Stainless Steel Bars
A751 Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
A1058 Test Methods for Mechanical Testing of Steel Products--Metric
E527 Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)