ASTM Store Search found 311 matching products:

C5-10 Standard Specification for Quicklime for Structural Purposes

C10/C10M-10 Standard Specification for Natural Cement

C11-13 Standard Terminology Relating to Gypsum and Related Building Materials and Systems

C22/C22M-00(2010) Standard Specification for Gypsum

C25-11 Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime

C28/C28M-10 Standard Specification for Gypsum Plasters

C29/C29M-09 Standard Test Method for Bulk Density ("Unit Weight") and Voids in Aggregate

C31/C31M-12 Standard Practice for Making and Curing Concrete Test Specimens in the Field

C33/C33M-13 Standard Specification for Concrete Aggregates

C35-01(2009) Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster

C39/C39M-12a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens

C40/C40M-11 Standard Test Method for Organic Impurities in Fine Aggregates for Concrete

C42/C42M-13 Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete

C50/C50M-13 Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products

C51-11 Standard Terminology Relating to Lime and Limestone (as used by the Industry)

C59/C59M-00(2011) Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster

C61/C61M-00(2011) Standard Specification for Gypsum Keene's Cement

C70-13 Standard Test Method for Surface Moisture in Fine Aggregate

C78/C78M-10e1 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)

C87/C87M-10 Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar

C88-13 Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate

C91/C91M-12 Standard Specification for Masonry Cement

C94/C94M-13a Standard Specification for Ready-Mixed Concrete

C109/C109M-12 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)

C110-11 Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone

C114-11be1 Standard Test Methods for Chemical Analysis of Hydraulic Cement

C115-10 Standard Test Method for Fineness of Portland Cement by the Turbidimeter

C117-13 Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing

C123/C123M-12 Standard Test Method for Lightweight Particles in Aggregate

C125-13a Standard Terminology Relating to Concrete and Concrete Aggregates

C127-12 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate

C128-12 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate

C131-06 Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine

C136-06 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates

C138/C138M-13 Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete

C141/C141M-09 Standard Specification for Hydrated Hydraulic Lime for Structural Purposes

C142/C142M-10 Standard Test Method for Clay Lumps and Friable Particles in Aggregates

C143/C143M-12 Standard Test Method for Slump of Hydraulic-Cement Concrete

C150/C150M-12 Standard Specification for Portland Cement

C151/C151M-09 Standard Test Method for Autoclave Expansion of Hydraulic Cement

C156-11 Standard Test Method for Water Loss [from a Mortar Specimen] Through Liquid Membrane-Forming Curing Compounds for Concrete

C157/C157M-08 Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete

C171-07 Standard Specification for Sheet Materials for Curing Concrete

C172/C172M-10 Standard Practice for Sampling Freshly Mixed Concrete

C173/C173M-12 Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method

C174/C174M-13 Standard Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores

C183-08 Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement

C185-08 Standard Test Method for Air Content of Hydraulic Cement Mortar

C186-05 Standard Test Method for Heat of Hydration of Hydraulic Cement

C187-11e1 Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste

C188-09 Standard Test Method for Density of Hydraulic Cement

C191-08 Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle

C192/C192M-13 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory

C204-11 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus

C206-03(2009) Standard Specification for Finishing Hydrated Lime

C207-06(2011) Standard Specification for Hydrated Lime for Masonry Purposes

C215-08 Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Frequencies of Concrete Specimens

C219-13 Standard Terminology Relating to Hydraulic Cement

C226-12 Standard Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement

C227-10 Standard Test Method for Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method)

C230/C230M-13 Standard Specification for Flow Table for Use in Tests of Hydraulic Cement

C231/C231M-10 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method

C232/C232M-13a Standard Test Method for Bleeding of Concrete

C233/C233M-11 Standard Test Method for Air-Entraining Admixtures for Concrete

C260/C260M-10a Standard Specification for Air-Entraining Admixtures for Concrete

C265-08 Standard Test Method for Water-Extractable Sulfate in Hydrated Hydraulic Cement Mortar

C266-08e1 Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles

C289-07 Standard Test Method for Potential Alkali-Silica Reactivity of Aggregates (Chemical Method)

C293/C293M-10 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)

C294-12 Standard Descriptive Nomenclature for Constituents of Concrete Aggregates

C295/C295M-12 Standard Guide for Petrographic Examination of Aggregates for Concrete

C305-13 Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency

C309-11 Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete

C311/C311M-13 Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete

C317/C317M-00(2010) Standard Specification for Gypsum Concrete

C318/C318M-00(2010) Standard Specification for Gypsum Formboard

C330/C330M-09 Standard Specification for Lightweight Aggregates for Structural Concrete

C331/C331M-10 Standard Specification for Lightweight Aggregates for Concrete Masonry Units

C332-09 Standard Specification for Lightweight Aggregates for Insulating Concrete

C341/C341M-06 Standard Practice for Length Change of Cast, Drilled, or Sawed Specimens of Hydraulic-Cement Mortar and Concrete

C348-08 Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars

C349-08 Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)

C359-08 Standard Test Method for Early Stiffening of Hydraulic Cement (Mortar Method)

C387/C387M-11b Standard Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar

C400-98(2013) Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid

C403/C403M-08 Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance

C418-12 Standard Test Method for Abrasion Resistance of Concrete by Sandblasting

C430-08 Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve

C441/C441M-11 Standard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction

C451-08 Standard Test Method for Early Stiffening of Hydraulic Cement (Paste Method)

C452/C452M-10 Standard Test Method for Potential Expansion of Portland-Cement Mortars Exposed to Sulfate

C457/C457M-12 Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete

C465-10 Standard Specification for Processing Additions for Use in the Manufacture of Hydraulic Cements

C469/C469M-10 Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression

C470/C470M-09 Standard Specification for Molds for Forming Concrete Test Cylinders Vertically

C471M-01(2012) Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric)

C472-99(2009) Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete

C473-12 Standard Test Methods for Physical Testing of Gypsum Panel Products

C474-13 Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction

C475/C475M-12 Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board

C490/C490M-11 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete

C494/C494M-13 Standard Specification for Chemical Admixtures for Concrete

C495/C495M-12 Standard Test Method for Compressive Strength of Lightweight Insulating Concrete

C496/C496M-11 Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens

C511-09 Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes

C512/C512M-10 Standard Test Method for Creep of Concrete in Compression

C513-11 Standard Test Method for Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for Compressive Strength

C514-04(2009)e1 Standard Specification for Nails for the Application of Gypsum Board

C535-12 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine

C563-13 Standard Test Method for Approximation of Optimum SO3 in Hydraulic Cement Using Compressive Strength

C566-13 Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying

C567/C567M-11 Standard Test Method for Determining Density of Structural Lightweight Concrete

C586-11 Standard Test Method for Potential Alkali Reactivity of Carbonate Rocks as Concrete Aggregates (Rock-Cylinder Method)

C587-04(2009) Standard Specification for Gypsum Veneer Plaster

C593-06(2011) Standard Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization

C595/C595M-13 Standard Specification for Blended Hydraulic Cements

C596-09 Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement

C597-09 Standard Test Method for Pulse Velocity Through Concrete

C602-13 Standard Specification for Agricultural Liming Materials

C617/C617M-12 Standard Practice for Capping Cylindrical Concrete Specimens

C618-12a Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete

C631-09 Standard Specification for Bonding Compounds for Interior Gypsum Plastering

C637-09 Standard Specification for Aggregates for Radiation-Shielding Concrete

C638-09 Standard Descriptive Nonmenclature of Constituents of Aggregates for Radiation-Shielding Concrete

C641-09 Standard Test Method for Iron Staining Materials in Lightweight Concrete Aggregates

C642-13 Standard Test Method for Density, Absorption, and Voids in Hardened Concrete

C645-13 Standard Specification for Nonstructural Steel Framing Members

C666/C666M-03(2008) Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing

C670-13 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials

C672/C672M-12 Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals

C685/C685M-11 Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing

C688-08e1 Standard Specification for Functional Additions for Use in Hydraulic Cements

C702/C702M-11 Standard Practice for Reducing Samples of Aggregate to Testing Size

C706-02(2008)e1 Standard Specification for Limestone for Animal Feed Use

C737-08 Standard Specification for Limestone for Dusting of Coal Mines

C754-11 Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products

C778-13 Standard Specification for Standard Sand

C779/C779M-12 Standard Test Method for Abrasion Resistance of Horizontal Concrete Surfaces

C786/C786M-10 Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-μm (No. 50), 150-μm (No. 100), and 75-μm (No. 200) Sieves by Wet Methods

C796/C796M-12 Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam

C802-09a Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials

C803/C803M-03(2010) Standard Test Method for Penetration Resistance of Hardened Concrete

C805/C805M-13 Standard Test Method for Rebound Number of Hardened Concrete

C806-12 Standard Test Method for Restrained Expansion of Expansive Cement Mortar

C807-08 Standard Test Method for Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle

C821-09 Standard Specification for Lime for Use with Pozzolans

C823/C823M-12 Standard Practice for Examination and Sampling of HardenedConcrete in Constructions

C827/C827M-10 Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures

C840-11 Standard Specification for Application and Finishing of Gypsum Board

C841-03(2008)e1 Standard Specification for Installation of Interior Lathing and Furring

C842-05(2010)e1 Standard Specification for Application of Interior Gypsum Plaster

C843-99(2012) Standard Specification for Application of Gypsum Veneer Plaster

C844-04(2010) Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster

C845/C845M-12 Standard Specification for Expansive Hydraulic Cement

C847-12 Standard Specification for Metal Lath

C856-11 Standard Practice for Petrographic Examination of Hardened Concrete

C869/C869M-11 Standard Specification for Foaming Agents Used in Making Preformed Foam for Cellular Concrete

C873/C873M-10a Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds

C878/C878M-09 Standard Test Method for Restrained Expansion of Shrinkage-Compensating Concrete

C881/C881M-10 Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete

C882/C882M-13 Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear

C884/C884M-98(2010) Standard Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay

C897-05(2009) Standard Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters

C900-13 Standard Test Method for Pullout Strength of Hardened Concrete

C911-06(2011) Standard Specification for Quicklime, Hydrated Lime, and Limestone for Selected Chemical and Industrial Uses

C917-05(2011) Standard Test Method for Evaluation of Cement Strength Uniformity From a Single Source

C918/C918M-07 Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength

C926-12a Standard Specification for Application of Portland Cement-Based Plaster

C928/C928M-09 Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs

C932-06(2013) Standard Specification for Surface-Applied Bonding Compounds for Exterior Plastering

C933-13 Standard Specification for Welded Wire Lath

C937-10 Standard Specification for Grout Fluidifier for Preplaced-Aggregate Concrete

C938-10 Standard Practice for Proportioning Grout Mixtures for Preplaced-Aggregate Concrete

C939-10 Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)

C940-10a Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory

C941-10 Standard Test Method for Water Retentivity of Grout Mixtures for Preplaced-Aggregate Concrete in the Laboratory

C942-10 Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory

C943-10 Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory

C944/C944M-12 Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method

C953-10 Standard Test Method for Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory

C954-11 Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness

C955-11c Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases

C956-04(2010) Standard Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete

C977-10 Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization

C979/C979M-10 Standard Specification for Pigments for Integrally Colored Concrete

C989/C989M-12a Standard Specification for Slag Cement for Use in Concrete and Mortars

C1002-07 Standard Specification for Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs

C1005-10 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements

C1007-11a Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories

C1012/C1012M-13 Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution

C1017/C1017M-07 Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete

C1032-06(2011) Standard Specification for Woven Wire Plaster Base

C1038/C1038M-10 Standard Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water

C1040/C1040M-08 Standard Test Methods for In-Place Density of Unhardened and Hardened Concrete, Including Roller Compacted Concrete, By Nuclear Methods

C1047-10a Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base

C1059/C1059M-99(2008) Standard Specification for Latex Agents for Bonding Fresh To Hardened Concrete

C1063-12c Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster

C1064/C1064M-12 Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete

C1067-12 Standard Practice for Conducting a Ruggedness Evaluation or Screening Program for Test Methods for Construction Materials

C1073-12 Standard Test Method for Hydraulic Activity of Slag Cement by Reaction with Alkali

C1074-11 Standard Practice for Estimating Concrete Strength by the Maturity Method

C1077-13b Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation

C1084-10 Standard Test Method for Portland-Cement Content of Hardened Hydraulic-Cement Concrete

C1090-10 Standard Test Method for Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout

C1097-07(2012) Standard Specification for Hydrated Lime for Use in Asphalt Cement or Bituminous Pavements

C1105-08a Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction

C1107/C1107M-13 Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink)

C1116/C1116M-10a Standard Specification for Fiber-Reinforced Concrete

C1138M-12 Standard Test Method for Abrasion Resistance of Concrete (Underwater Method)

C1140/C1140M-11 Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels

C1141/C1141M-08 Standard Specification for Admixtures for Shotcrete

C1152/C1152M-04(2012)e1 Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete

C1157/C1157M-11 Standard Performance Specification for Hydraulic Cement

C1164-92(2009) Standard Practice for Evaluation of Limestone or Lime Uniformity From a Single Source

C1170/C1170M-08 Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table

C1176/C1176M-08 Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table

C1177/C1177M-08 Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing

C1178/C1178M-11 Standard Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panel

C1202-12 Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration

C1218/C1218M-99(2008) Standard Test Method for Water-Soluble Chloride in Mortar and Concrete

C1222-09 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement

C1231/C1231M-12 Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders

C1240-12 Standard Specification for Silica Fume Used in Cementitious Mixtures

C1245/C1245M-12 Standard Test Method for Determining Relative Bond Strength Between Hardened Roller Compacted Concrete Lifts (Point Load Test)

C1252-06 Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)

C1260-07 Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)

C1264-11 Standard Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling, and Storage of Gypsum Panel Products

C1271-99(2012) Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone

C1278/C1278M-07a(2011) Standard Specification for Fiber-Reinforced Gypsum Panel

C1280-13 Standard Specification for Application of Exterior Gypsum Panel Products for Use as Sheathing

C1293-08b Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction

C1301-95(2009)e1 Standard Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)

C1315-11 Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete

C1318-95(2009)e1 Standard Test Method for Determination of Total Neutralizing Capability and Dissolved Calcium and Magnesium Oxide in Lime for Flue Gas Desulfurization (FGD)

C1328/C1328M-12 Standard Specification for Plastic (Stucco) Cement

C1329/C1329M-12 Standard Specification for Mortar Cement

C1355/C1355M-96(2011) Standard Specification for Glass Fiber Reinforced Gypsum Composites

C1356-07(2012) Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure

C1362-09 Standard Test Method for Flow of Freshly Mixed Hydraulic Cement Concrete

C1365-06(2011) Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis

C1381/C1381M-97(2013) Standard Specification for Molded Glass Fiber Reinforced Gypsum Parts

C1383-04(2010) Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method

C1385/C1385M-10 Standard Practice for Sampling Materials for Shotcrete

C1396/C1396M-13 Standard Specification for Gypsum Board

C1397-09 Standard Practice for Application of Class PB Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage

C1399/C1399M-10 Standard Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete

C1435/C1435M-08 Standard Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer

C1436-08 Standard Specification for Materials for Shotcrete

C1437-13 Standard Test Method for Flow of Hydraulic Cement Mortar

C1438-11a Standard Specification for Latex and Powder Polymer Modifiers in Hydraulic Cement Concrete and Mortar

C1439-08a Standard Test Methods for Evaluating Polymer Modifiers in Mortar and Concrete

C1451-11 Standard Practice for Determining Uniformity of Ingredients of Concrete From a Single Source

C1467/C1467M-00(2012) Standard Specification for the Installation of Molded Glass Fiber Reinforced Gypsum Parts

C1480/C1480M-07(2012) Standard Specification for Packaged, Pre-Blended, Dry, Combined Materials for Use in Wet or Dry Shotcrete Application

C1489-01(2008)e1 Standard Specification for Lime Putty for Structural Purposes

C1506-09 Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters

C1513-13 Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections

C1516-05(2011) Standard Practice for Application of Direct-Applied Exterior Finish Systems

C1524-02a(2010) Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method)

C1529-06a(2011) Standard Specification for Quicklime, Hydrated Lime, and Limestone for Environmental Uses

C1535-05(2011) Standard Practice for Application of Exterior Insulation and Finish Systems Class PI

C1542/C1542M-02(2010) Standard Test Method for Measuring Length of Concrete Cores

C1543-10a Standard Test Method for Determining the Penetration of Chloride Ion into Concrete by Ponding

C1546-02(2008)e1 Standard Guide for Installation of Gypsum Products in Concealed Radiant Ceiling Heating Systems

C1550-12a Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)

C1556-11a Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion

C1565-09 Standard Test Method for Determination of Pack-Set Index of Portland Cement

C1567-13 Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)

C1579-13 Standard Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert)

C1580-09e1 Standard Test Method for Water-Soluble Sulfate in Soil

C1581/C1581M-09a Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage

C1582/C1582M-11 Standard Specification for Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete

C1583/C1583M-13 Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)

C1585-13 Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes

C1600/C1600M-11 Standard Specification for Rapid Hardening Hydraulic Cement

C1602/C1602M-12 Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete

C1603-10 Standard Test Method for Measurement of Solids in Water

C1604/C1604M-05(2012) Standard Test Method for Obtaining and Testing Drilled Cores of Shotcrete

C1608-12 Standard Test Method for Chemical Shrinkage of Hydraulic Cement Paste

C1609/C1609M-12 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)

C1610/C1610M-10 Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique

C1611/C1611M-09be1 Standard Test Method for Slump Flow of Self-Consolidating Concrete

C1621/C1621M-09b Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring

C1622/C1622M-10 Standard Specification for Cold-Weather Admixture Systems

C1629/C1629M-06(2011) Standard Classification for Abuse-Resistant Nondecorated Interior Gypsum Panel Products and Fiber-Reinforced Cement Panels

C1646/C1646M-08a Standard Practice for Making and Curing Test Specimens for Evaluating Resistance of Coarse Aggregate to Freezing and Thawing in Air-Entrained Concrete

C1658/C1658M-12 Standard Specification for Glass Mat Gypsum Panels

C1679-09 Standard Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry

C1688/C1688M-13 Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete

C1697-10 Standard Specification for Blended Supplementary Cementitious Materials

C1698-09 Standard Test Method for Autogenous Strain of Cement Paste and Mortar

C1701/C1701M-09 Standard Test Method for Infiltration Rate of In Place Pervious Concrete

C1702-09a Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry

C1707-11 Standard Specification for Pozzolanic Hydraulic Lime for Structural Purposes

C1708-12 Standard Test Methods for Self-leveling Mortars Containing Hydraulic Cements

C1709-11 Standard Guide for Evaluation of Alternative Supplementary Cementitious Materials (ASCM) for Use in Concrete

C1712-09 Standard Test Method for Rapid Assessment of Static Segregation Resistance of Self-Consolidating Concrete Using Penetration Test

C1723-10 Standard Guide for Examination of Hardened Concrete Using Scanning Electron Microscopy

C1738-11a Standard Practice for High-Shear Mixing of Hydraulic Cement Paste

C1740-10 Standard Practice for Evaluating the Condition of Concrete Plates Using the Impulse-Response Method

C1741-12 Standard Test Method for Bleed Stability of Cementitious Post-Tensioning Tendon Grout

C1747/C1747M-11 Standard Test Method for Determining Potential Resistance to Degradation of Pervious Concrete by Impact and Abrasion

C1749-12 Standard Guide for Measurement of the Rheological Properties of Hydraulic Cementious Paste Using a Rotational Rheometer

C1754/C1754M-12 Standard Test Method for Density and Void Content of Hardened Pervious Concrete

C1758/C1758M-13 Standard Practice for Fabricating Test Specimens with Self-Consolidating Concrete

C1760-12 Standard Test Method for Bulk Electrical Conductivity of Hardened Concrete

C1761/C1761M-13a Standard Specification for Lightweight Aggregate for Internal Curing of Concrete

C1764-12 Standard Test Methods for Non Metallic Plaster Bases (Lath) Used with Portland Cement Based Plaster in Vertical Wall Applications

C1766-13 Standard Specification for Factory-Laminated Gypsum Panel Products

C1768/C1768M-12 Standard Practice for Accelerated Curing of Concrete Cylinders

D6249-06(2011) Standard Guide for Alkaline Stabilization of Wastewater Treatment Plant Residuals