ASTM Store Search found 413 matching products:

A627-03(2011) Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities
C367/C367M-09 Standard Test Methods for Strength Properties of Prefabricated Architectural Acoustical Tile or Lay-In Ceiling Panels
C384-04(2011) Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method
C423-09a Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method
C509-06(2011) Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material
C510-05a(2011) Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants
C522-03(2009)e1 Standard Test Method for Airflow Resistance of Acoustical Materials
C542-05(2011) Standard Specification for Lock-Strip Gaskets
C603-04(2008) Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
C634-11 Standard Terminology Relating to Building and Environmental Acoustics
C635/C635M-13 Standard Specification for the Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings
C636/C636M-13 Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels
C639-01(2011) Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
C661-06(2011) Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
C679-03(2009)e1 Standard Test Method for Tack-Free Time of Elastomeric Sealants
C681-03(2009) Standard Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds
C711-03(2009) Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
C712-03(2009) Standard Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants
C716-06(2011) Standard Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials
C717-12b Standard Terminology of Building Seals and Sealants
C719-13 Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
C731-00(2010) Standard Test Method for Extrudability, After Package Aging, of Latex Sealants
C732-06(2012) Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants
C734-06(2012) Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
C736-12 Standard Test Method for Extension-Recovery and Adhesion of Latex Sealants
C765-97(2011) Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants
C771-03(2009) Standard Test Method for Weight Loss After Heat Aging of Preformed Sealing Tapes
C772-03(2009) Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants
C782-13 Standard Test Method for Softness of Preformed Tape Sealants
C792-04(2008) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
C793-05(2010) Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
C794-10 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
C834-10 Standard Specification for Latex Sealants
C864-05(2011) Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers
C879-03(2009) Standard Test Methods for Release Papers Used With Preformed Tape Sealants
C907-03(2012) Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
C908-00(2011) Standard Test Method for Yield Strength of Preformed Tape Sealants
C910-06(2011) Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
C919-12 Standard Practice for Use of Sealants in Acoustical Applications
C920-11 Standard Specification for Elastomeric Joint Sealants
C961-06(2011) Standard Test Method for Lap Shear Strength of Sealants
C963-00(2012) Standard Specification for Packaging, Identification, Shipment, and Storage of Lock-Strip Gaskets
C964-07(2012) Standard Guide for Lock-Strip Gasket Glazing
C972-00(2011) Standard Test Method for Compression-Recovery of Tape Sealant
C1016-02(2008)e1 Standard Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material
C1021-08 Standard Practice for Laboratories Engaged in Testing of Building Sealants
C1083-06(2011) Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials
C1087-00(2011) Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
C1115-06(2011) Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories
C1135-00(2011) Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants
C1166-06(2011) Standard Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories
C1183/C1183M-13 Standard Test Method for Extrusion Rate of Elastomeric Sealants
C1184-13 Standard Specification for Structural Silicone Sealants
C1193-13 Standard Guide for Use of Joint Sealants
C1216/C1216M-13 Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants
C1241-00(2009) Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
C1246-00(2012) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
C1247-09 Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids
C1248-08(2012) Standard Test Method for Staining of Porous Substrate by Joint Sealants
C1249-06a(2010) Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications
C1253-93(2009) Standard Test Method for Determining the Outgassing Potential of Sealant Backing
C1257-06a(2012) Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
C1265-94(2011) Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications
C1266-02(2011) Standard Test Method for Flow Characteristics of Preformed Tape Sealants
C1281-03(2009) Standard Specification for Preformed Tape Sealants for Glazing Applications
C1294-07(2011) Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials
C1311-10 Standard Specification for Solvent Release Sealants
C1330-02(2013) Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants
C1367-06(2012) Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures
C1369-07 Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units
C1375-00(2009) Standard Guide for Substrates Used in Testing Building Seals and Sealants
C1382-11 Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
C1392-00(2009) Standard Guide for Evaluating Failure of Structural Sealant Glazing
C1394-03(2012) Standard Guide for In-Situ Structural Silicone Glazing Evaluation
C1401-09a Standard Guide for Structural Sealant Glazing
C1442-11 Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
C1472-10 Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
C1481-12 Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)
C1487-02(2012) Standard Guide for Remedying Structural Silicone Glazing
C1501-09 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
C1518-04(2009) Standard Specification for Precured Elastomeric Silicone Joint Sealants
C1519-10 Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
C1520-02(2010) Standard Guide for Paintability of Latex Sealants
C1521-13 Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints
C1523-10 Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
C1536-10 Standard Test Method for Measuring the Yield for Aerosol Foam Sealants
C1564-04(2009) Standard Guide for Use of Silicone Sealants for Protective Glazing Systems
C1589/C1589M-13 Standard Practice for Outdoor Weathering of Construction Seals and Sealants
C1620-12 Standard Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants
C1635-06 Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension
C1642-07 Standard Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials
C1643-08 Standard Test Method to Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants
C1681-09 Standard Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain
C1735-11 Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation
C1736-11 Standard Practice for Non-Destructive Evaluation of Adhesion of Installed Weatherproofing Sealant Joints Using a Rolling Device
C1737-10 Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing
C1756-11 Standard Guide for Comparing Sealant Behavior to Reference Photographs
D2202-00(2010) Standard Test Method for Slump of Sealants
D2203-01(2011) Standard Test Method for Staining from Sealants
D2377-00(2008) Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants
D2452-03(2009) Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds
D2453-03(2009) Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
E72-10 Standard Test Methods of Conducting Strength Tests of Panels for Building Construction
E73-13 Standard Practice for Static Load Testing of Truss Assemblies
E90-09 Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
E154/E154M-08a(2013)e1 Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover
E196-06(2012) Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs
E241-09 Standard Guide for Limiting Water-Induced Damage to Buildings
E283-04(2012) Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
E330-02(2010) Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference
E331-00(2009) Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
E336-11 Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings
E405-04(2012) Standard Test Methods for Wear Testing Rotary Operators for Windows
E413-10 Classification for Rating Sound Insulation
E455-11 Standard Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings
E477-06a Standard Test Method for Measuring Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
E488/E488M-10 Standard Test Methods for Strength of Anchors in Concrete Elements
E492-09 Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine
E529-04(2011) Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction
E546-08 Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units
E547-00(2009) Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference
E557-12 Standard Guide for Architectural Design and Installation Practices for Sound Isolation between Spaces Separated by Operable Partitions
E564-06(2012) Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings
E575-05(2011) Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies
E576-08 Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units in the Vertical Position
E580/E580M-11b Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions
E596-96(2009) Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
E605-93(2011) Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
E631-06 Standard Terminology of Building Constructions
E661-03(2009) Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads
E695-03(2009) Standard Method for Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading
E736-00(2011) Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members
E741-11 Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
E754-80(2006) Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints
E756-05(2010) Standard Test Method for Measuring Vibration-Damping Properties of Materials
E759-92(2011) Standard Test Method for Effect of Deflection on Sprayed Fire-Resistive Material Applied to Structural Members
E760-92(2011) Standard Test Method for Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural Members
E761-92(2011) Standard Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members
E779-10 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization
E783-02(2010) Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors
E795-05(2012) Standard Practices for Mounting Test Specimens During Sound Absorption Tests
E833-12 Standard Terminology of Building Economics
E859-93(2011) Standard Test Method for Air Erosion of Sprayed Fire-Resistive Materials (SFRMs) Applied to Structural Members
E864-12 Standard Practice for Surface Preparation of Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
E865-12 Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels
E866-11 Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
E874-11 Standard Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels
E894-88(2010) Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings
E917-05(2010) Standard Practice for Measuring Life-Cycle Costs of Buildings and Building Systems
E935-13 Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings
E937-93(2011) Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
E964-06(2010) Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems
E966-10e1 Standard Guide for Field Measurements of Airborne Sound Insulation of Building Facades and Facade Elements
E985-00(2006) Standard Specification for Permanent Metal Railing Systems and Rails for Buildings
E987-88(2009) Standard Test Methods for Deglazing Force of Fenestration Products
E989-06(2012) Standard Classification for Determination of Impact Insulation Class (IIC)
E990-09 Standard Specification for Core-Splice Adhesive for Honeycomb Sandwich Shelter Panels
E997-12 Standard Test Method for Structural Performance of Glass in Exterior Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Destructive Methods
E998-12 Standard Test Method for Structural Performance of Glass in Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Nondestructive Method
E1007-13 Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures
E1014-12 Standard Guide for Measurement of Outdoor A-Weighted Sound Levels
E1042-02(2008)e1 Standard Classification for Acoustically Absorptive Materials Applied by Trowel or Spray
E1050-12 Standard Test Method for Impedance and Absorption of Acoustical Materials Using a Tube, Two Microphones and a Digital Frequency Analysis System
E1057-06(2010) Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems
E1074-09 Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems
E1091-08 Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels
E1105-00(2008) Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference
E1110-06(2011) Standard Classification for Determination of Articulation Class
E1111-07 Standard Test Method for Measuring the Interzone Attenuation of Open Office Components
E1121-12 Standard Practice for Measuring Payback for Investments in Buildings and Building Systems
E1123-86(2009) Standard Practices for Mounting Test Specimens for Sound Transmission Loss Testing of Naval and Marine Ship Bulkhead Treatment Materials
E1124-10 Standard Test Method for Field Measurement of Sound Power Level by the Two-Surface Method
E1130-08 Standard Test Method for Objective Measurement of Speech Privacy in Open Plan Spaces Using Articulation Index
E1155-96(2008) Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers
E1155M-96(2008) Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers [Metric]
E1179-11 Standard Specification for Sound Sources Used for Testing Open Office Components and Systems
E1185-12 Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems
E1186-03(2009) Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems
E1190-11 Standard Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members
E1222-90(2009) Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems
E1233-06 Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential
E1258-88(2012) Standard Test Method for Airflow Calibration of Fan Pressurization Devices
E1264-08e1 Standard Classification for Acoustical Ceiling Products
E1265-04(2013) Standard Test Method for Measuring Insertion Loss of Pneumatic Exhaust Silencers
E1289-08 Standard Specification for Reference Specimen for Sound Transmission Loss
E1300-12ae1 Standard Practice for Determining Load Resistance of Glass in Buildings
E1307-10 Standard Practice for Surface Preparation and Structural Adhesive Bonding of Precured, Nonmetallic Composite Facings to Structural Core for Flat Shelter Panels
E1332-10a Standard Classification for Rating Outdoor-Indoor Sound Attenuation
E1334-95(2012) Standard Practice for Rating the Serviceability of a Building or Building-Related Facility
E1369-11 Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems
E1374-06(2011) Standard Guide for Open Office Acoustics and Applicable ASTM Standards
E1399-97(2009) Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems
E1410-91(2005) Standard Practice for Specifying Data for Evaluation of Energy Used in Residential Buildings
E1414/E1414M-11a Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum
E1423-06 Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems
E1424-91(2008) Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen
E1425-07 Standard Practice for Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems
E1464-92(2005) Standard Guide for Developing Energy Monitoring Protocols for Commercial and Institutional Buildings or Facilities
E1465-08a Standard Practice for Radon Control Options for the Design and Construction of New Low-Rise Residential Buildings
E1480-92(2013) Standard Terminology of Facility Management (Building-Related)
E1481-00a(2008) Standard Terminology of Railing Systems and Rails for Buildings
E1486-98(2010) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
E1486M-98(2010) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria [Metric]
E1503-12 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System
E1509-12 Standard Specification for Room Heaters, Pellet Fuel-Burning Type
E1512-01(2007) Standard Test Methods for Testing Bond Performance of Bonded Anchors
E1513-93(2011) Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs)
E1514-98(2011) Standard Specification for Structural Standing Seam Steel Roof Panel Systems
E1554/E1554M-13 Standard Test Methods for Determining Air Leakage of Air Distribution Systems by Fan Pressurization
E1555-12 Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair
E1556-12 Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair
E1557-09 Standard Classification for Building Elements and Related Sitework-UNIFORMAT II
E1573-09 Standard Test Method for Evaluating Masking Sound in Open Offices Using A-Weighted and One-Third Octave Band Sound Pressure Levels
E1574-98(2006) Standard Test Method for Measurement of Sound in Residential Spaces
E1592-05(2012) Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference
E1602-03(2010)e1 Standard Guide for Construction of Solid Fuel Burning Masonry Heaters
E1605-04(2012) Standard Terminology Relating to Lead in Buildings
E1612-94(2009) Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
E1613-12 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
E1637-98(2011) Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems
E1643-11 Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs
E1644-04(2012)e1 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
E1645-01(2007) Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
E1646-95(2011) Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference
E1660-95a(2012) Standard Classification for Serviceability of an Office Facility for Support for Office Work
E1661-95a(2012) Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness
E1662-95a(2012) Standard Classification for Serviceability of an Office Facility for Sound and Visual Environment
E1663-03(2010) Standard Classification for Serviceability of an Office Facility for Typical Office Information Technology
E1664-95a(2012) Standard Classification for Serviceability of an Office Facility for Layout and Building Factors
E1665-95a(2012) Standard Classification for Serviceability of an Office Facility for Facility Protection
E1666-95a(2012) Standard Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions
E1667-95a(2012) Standard Classification for Serviceability of an Office Facility for Image to the Public and Occupants
E1668-95a(2012) Standard Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff
E1669-95a(2012) Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding
E1670-95a(2012) Standard Classification for Serviceability of an Office Facility for Management of Operations and Maintenance
E1671-95a(2012) Standard Classification for Serviceability of an Office Facility for Cleanliness
E1677-11 Standard Specification for Air Barrier (AB) Material or System for Low-Rise Framed Building Walls
E1679-95(2012) Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility
E1680-11 Standard Test Method for Rate of Air Leakage Through Exterior Metal Roof Panel Systems
E1686-10 Standard Guide for Applying Environmental Noise Measurement Methods and Criteria
E1692-95a(2012) Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants
E1693-95(2012) Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets
E1694-95a(2012) Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies
E1699-10 Standard Practice for Performing Value Analysis (VA) of Buildings and Building Systems and Other Constructed Projects
E1700-95(2005) Standard Classification for Serviceability of an Office Facility for Structure and Building Envelope
E1701-95(2012) Standard Classification for Serviceability of an Office Facility for Manageability
E1704-95(2010) Standard Guide for Specifying Acoustical Performance of Sound-Isolating Enclosures
E1726-01(2009) Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
E1727-05 Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination
E1728-10 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
E1729-05 Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination
E1730-09 Standard Specification for Rigid Foam for Use in Structural Sandwich Panel Cores
E1745-11 Standard Specification for Plastic Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs
E1748-95(2009) Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System
E1749-10 Standard Terminology Relating to Rigid Wall Relocatable Shelters
E1753-13 Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films
E1765-11 Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Buildings and Building Systems
E1773-10 Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants
E1775-07 Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead
E1780-12 Standard Guide for Measuring Outdoor Sound Received from a Nearby Fixed Source
E1783-96(2009) Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
E1792-03(2011) Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
E1793-11 Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters
E1794-08 Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (200°F Elevated Humidity Service), Type II Panels
E1795-12 Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
E1796-03(2011)e1 Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings
E1797-12 Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
E1800-08 Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (160°F Elevated Humidity Service), Type I Panels
E1801-09 Standard Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters
E1803-06 Standard Test Methods for Determining Structural Capacities of Insulated Panels
E1804-12 Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project
E1825-06(2012) Standard Guide for Evaluation of Exterior Building Wall Materials, Products, and Systems
E1826-12 Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded
E1827-11 Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door
E1836/E1836M-09e1 Standard Practice for Building Floor Area Measurements for Facility Management
E1851-09 Standard Test Method for Electromagnetic Shielding Effectiveness of Durable Rigid Wall Relocatable Structures
E1857-97(2013)e1 Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces
E1886-05 Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials
E1908-10 Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)
E1925-10 Specifiction for Engineering and Design Criteria for Rigid Wall Relocatable Structures
E1946-12 Standard Practice for Measuring Cost Risk of Buildings and Building Systems and Other Constructed Projects
E1974-11 Standard Specification for Shelter, Electrical Equipment S-250/G
E1975-09 Standard Specification for Shelter, Electrical, Equipment S-280/G
E1976-11 Standard Specification for Shelter, Tactical, Nonexpandable
E1977-11 Standard Specification for Shelter, Tactical, Expandable, One-Side
E1978-11 Standard Specification for Shelter, Tactical, Expandable, Two-Side
E1979-12 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
E1993/E1993M-98(2013)e1 Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs
E1996-12a Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes
E1998-11 Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances
E2004-10 Standard Test Method for Facing Cleavage of Sandwich Panels
E2013-12 Standard Practice for Constructing FAST Diagrams and Performing Function Analysis During Value Analysis Study
E2025-99(2006) Standard Test Method for Evaluating Fenestration Components and Assemblies for Resistance to Impact Energies
E2026-07 Standard Guide for Seismic Risk Assessment of Buildings
E2029-11 Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution
E2068-00(2008) Standard Test Method for Determination of Operating Force of Sliding Windows and Doors
E2083-05(2010) Standard Classification for Building Construction Field Requirements, and Office Overhead Profit
E2098-00(2006) Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution
E2099-00(2007) Standard Practice for the Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems
E2103/E2103M-13 Standard Classification for Bridge Elements—UNIFORMAT II
E2110-11 Standard Terminology for Exterior Insulation and Finish Systems (EIFS)
E2112-07 Standard Practice for Installation of Exterior Windows, Doors and Skylights
E2115-06 Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities
E2120-10 Standard Practice for Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films
E2121-13 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings
E2126-11 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings
E2127-01a(2007) Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction
E2128-12 Standard Guide for Evaluating Water Leakage of Building Walls
E2134-01(2006) Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS)
E2136-04(2013) Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Durability
E2140-01(2009) Standard Test Method for Water Penetration of Metal Roof Panel Systems by Static Water Pressure Head
E2141-12 Standard Test Methods for Assessing the Durability of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units
E2150-09 Standard Classification for Life-Cycle Environmental Work Elements—Environmental Cost Element Structure
E2151-02(2010) Standard Terminology of Guides for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings
E2156-04(2013) Standard Guide for Evaluating Economic Performance of Alternative Designs, Systems, and Materials in Compliance with Performance Standard Guides for Single-Family Attached and Detached Dwellings
E2166-12 Standard Practice for Organizing and Managing Building Data
E2167-01(2008) Standard Guide for Selection and Use of Stone Consolidants
E2168-10 Standard Classification for Allowance, Contingency and Reserve Sums in Building Construction Estimating
E2174-10ae1 Standard Practice for On-Site Inspection of Installed Fire Stops
E2178-13 Standard Test Method for Air Permeance of Building Materials
E2179-03(2009) Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors
E2188-10 Standard Test Method for Insulating Glass Unit Performance
E2189-10e1 Standard Test Method for Testing Resistance to Fogging in Insulating Glass Units
E2190-10 Standard Specification for Insulating Glass Unit Performance and Evaluation
E2202-02(2009) Standard Practice for Measurement of Equipment-Generated Continuous Noise for Assessment of Health Hazards
E2203-02(2008) Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories
E2204-11a Standard Guide for Summarizing the Economic Impacts of Building-Related Projects
E2235-04(2012) Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods
E2239-12 Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities
E2240-06 Standard Test Method for Assessing the Current-Voltage Cycling Stability at 90°C (194°F) of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units
E2241-06 Standard Test Method for Assessing the Current-Voltage Cycling Stability at Room Temperature of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units
E2249-02(2008) Standard Test Method for Laboratory Measurement of Airborne Transmission Loss of Building Partitions and Elements Using Sound Intensity
E2252-12 Standard Practice for Selection of Lead Hazard Reduction Methods for Identified Risks in Residential Housing or Child Occupied Facilities
E2260-03(2012) Standard Guide for Repointing (Tuckpointing) Historic Masonry
E2264-05 Standard Practice for Determining the Effects of Temperature Cycling on Fenestration Products
E2265-09 Standard Terminology for Anchors and Fasteners in Concrete and Masonry
E2266-11 Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion
E2267-04(2013) Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Indoor Air Quality
E2268-04(2011) Standard Test Method for Water Penetration of Exterior Windows, Skylights, and Doors by Rapid Pulsed Air Pressure Difference
E2269-05 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography
E2270-05 Standard Practice for Periodic Inspection of Building Facades for Unsafe Conditions
E2271-05a(2012)e1 Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Dwellings, and in Other Child-Occupied Facilities
E2273-03(2011) Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies
E2319-04(2011) Standard Test Method for Determining Air Flow Through the Face and Sides of Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
E2320-04(2012) Standard Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions
E2321-03(2011) Standard Practice for Use of Test Methods for Determining the Water Vapor Transmission (WVT) of Exterior Insulation and Finish Systems (EIFS)
E2322-03(2009) Standard Test Method for Conducting Traverse and Concentrated Load Tests on Panels used in Floor and Roof Construction
E2342-10 Standard Test Method for Durability Testing of Duct Sealants
E2351-04a(2013) Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Functionality
E2353-06 Standard Test Methods for Performance of Glass in Permanent Glass Railing Systems, Guards, and Balustrades
E2354-10 Standard Guide for Assessing the Durability of Absorptive Electrochromic Coatings within Sealed Insulating Glass Units
E2355-10 Standard Test Method for Measuring the Uniformity of an Absorptive Electrochromic Coating on a Glazing Surface
E2357-11 Standard Test Method for Determining Air Leakage of Air Barrier Assemblies
E2358-04(2010) Standard Specification for the Performance of Glass in Permanent Glass Railing Systems, Guards, and Balustrades
E2359-06 Standard Test Method for Field Pull Testing of an In-Place Exterior Insulation and Finish System Clad Wall Assembly
E2377-10 Standard Specification for Shelter, Electrical Equipment, Lightweight
E2393-10a Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers
E2395-06 Standard Specification for Voluntary Security Performance of Window and Door Assemblies with and without Glazing Impact.
E2430-05(2013) Standard Specification For Expanded Polystyrene (“EPS”) Thermal Insulation Boards For Use In Exterior Insulation and Finish Systems (“EIFS”)
E2431-12 Standard Practice for Determining the Resistance of Single Glazed Annealed Architectural Flat Glass to Thermal Loadings
E2459-05(2011) Standard Guide for Measurement of In-Duct Sound Pressure Levels from Large Industrial Gas Turbines and Fans
E2461-12 Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs
E2462-10 Standard Performance Specification for Cargo Bed Cover (CBC) HMMWV, Type I
E2463-11 Standard Performance Specification for Cargo Bed Cover (CBC) M105A2 Trailer, Type II
E2484-08 Standard Specification for Multi-Story Building External Evacuation Controlled Descent Devices
E2485-06 Standard Test Method for Freeze/Thaw Resistance of Exterior Insulation and Finish Systems (EIFS) and Water Resistive Barrier Coatings
E2486-06 Standard Test Method for Impact Resistance of Class PB and PI Exterior Insulation and Finish Systems (EIFS)
E2505-07 Standard Practice for Industrial Rope Access
E2506-11 Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities
E2511-09 Standard Guide for Detailing of EIFS-Clad Wall Assemblies
E2513-07(2012) Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems
E2514-08 Standard Practice for Presentation Format of Elemental Cost Estimates, Summaries, and Analyses
E2515-11 Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution Tunnel
E2516-11 Standard Classification for Cost Estimate Classification System
E2517-11 Standard Specification for Cargo Bed Cover, Type III (M35A2, 2 1/2 Ton Cargo Truck/M1078, 2 1/2 Ton Lightweight Medium Tactical Vehicle (LMTV)/ M1082, 2 1/2 Ton LMTV Trailer)
E2518-11 Standard Specification for Cargo Bed Cover, Type IV (M923, 5 Ton Cargo Truck/M1083, 5 Ton Medium Tactical Vehicle (MTV)/ M1082, 5 Ton MTV Trailer)
E2556/E2556M-10 Standard Specification for Vapor Permeable Flexible Sheet Water-Resistive Barriers Intended for Mechanical Attachment
E2557-07 Standard Practice for Probable Maximum Loss (PML) Evaluations for Earthquake Due-Diligence Assessments
E2558-13 Standard Test Method for Determining Particulate Matter Emissions from Fires in Wood-Burning Fireplaces
E2568-09e1 Standard Specification for PB Exterior Insulation and Finish Systems
E2570-07 Standard Test Methods for Evaluating Water-Resistive Barrier (WRB) Coatings Used under Exterior Insulation and Finish Systems (EIFS) or EIFS with Drainage
E2611-09 Standard Test Method for Measurement of Normal Incidence Sound Transmission of Acoustical Materials Based on the Transfer Matrix Method
E2618-09 Standard Test Method for Measurement of Particulate Emissions and Heating Efficiency of Outdoor Solid Fuel-Fired Hydronic Heating Appliances
E2619/E2619M-09e1 Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Area in Buildings
E2620-08 Standard Classification for Program and Project Estimate Summaries
E2634-11 Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems
E2637-08 Standard Guide for Utilizing the Environmental Cost Element Structure Presented by Classification E 2150
E2638-10 Standard Test Method for Objective Measurement of the Speech Privacy Provided by a Closed Room
E2649-12 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy
E2691-11 Standard Practice for Job Productivity Measurement
E2692-10 Standard Test Method for Structural Performance of Thermal Barriers in Fenestration Products ,
E2751/E2751M-13 Standard Practice for Design and Performance of Supported Laminated Glass Walkways
E2779-10 Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters
E2780-10 Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters
E2785-11 Standard Test Method for Exposure of Firestop Materials to Severe Environmental Conditions
E2786-10 Standard Test Methods for Measuring Expansion of Intumescent Materials Used in Firestop and Joint Systems
E2813-12 Standard Practice for Building Enclosure Commissioning
E2817-11 Standard Test Method for Test Fueling Masonry Heaters
E2841-11 Standard Guide for Conducting Inspections of Building Facades for Unsafe Conditions
E2923-13 Standard Practice for Longevity Assessment of Firestop Materials Using Differential Scanning Calorimetry
F588-07 Standard Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact
F842-13 Standard Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact
F1450-12a Standard Test Methods for Hollow Metal Swinging Door Assemblies for Detention and Correctional Facilities
F1534-10 Standard Test Method for Determining Changes in Fire-Test-Response Characteristics of Cushioning Materials After Water Leaching
F1550-10 Test Method for Determination of Fire-Test-Response Characteristics of Components or Composites of Mattresses or Furniture for Use in Correctional Facilities after Exposure to Vandalism, by Employing a Bench Scale Oxygen Consumption Calorimeter
F1577-05(2012) Standard Test Methods for Detention Locks for Swinging Doors
F1592-12 Standard Test Methods for Detention Hollow Metal Vision Systems
F1643-05(2012) Standard Test Methods for Detention Sliding Door Locking Device Assembly
F1758-05(2012) Standard Test Methods for Detention Hinges Used on Detention-Grade Swinging Doors
F1870-11 Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities
F1915-05(2012) Standard Test Methods for Glazing for Detention Facilities
F2322-12 Standard Test Methods for Physical Assault on Vertical Fixed Barriers for Detention and Correctional Facilities
F2542-05(2012) Standard Test Methods for Physical Assault on Ventilation Grilles for Detention and Correctional Facilities