Standard Historical Last Updated: Dec 31, 2010 Track Document
ASTM F79-69(2005)

Standard Specification for Type 101 Sealing Glass

Standard Specification for Type 101 Sealing Glass F0079-69R05 ASTM|F0079-69R05|en-US Standard Specification for Type 101 Sealing Glass Standard new BOS Vol. 15.02 Committee C14
$ 66.00 In stock

Abstract

This specification covers Type 101 sealing glass for use in electronic applications. The glass shall have a finish that ensures smooth, even surfaces and freedom from cracks, checks, bubbles, and other laws of a character detrimental to the strength or life of the component or device for which its use is intended. Different test methods shall be performed in order to determine the following properties of the sealing glass: softening point, annealing point, thermal expansion coefficient, contraction coefficient, and bead seal.

Scope

1.1 This specification covers Type 101 sealing glass for use in electronic applications. Note 1 This specification is primarily intended to consider glass as most generally used, this is, glass in its transparent form as normally encountered in fabricating electronic devices. lists sealing metals and alloys that are compatible with this glass. Type 101 glass in other forms such as powdered, crushed, sintered, fibrous, etc. are excluded. The requirements of this specification, as applied to these forms, must be established in the raw glass prior to its conversion.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 15.02
Developed by Subcommittee: C14.04
Pages: 3
DOI: 10.1520/F0079-69R05
ICS Code: 21.140