Standard Historical Last Updated: Dec 31, 2010 Track Document
ASTM F36-99(2003)

Standard Test Method for Compressibility and Recovery of Gasket Materials

Standard Test Method for Compressibility and Recovery of Gasket Materials F0036-99R03 ASTM|F0036-99R03|en-US Standard Test Method for Compressibility and Recovery of Gasket Materials Standard new BOS Vol. 09.02 Committee F03
$ 66.00 In stock

Abstract

This test method covers determination of the short-time compressibility and recovery at room temperature of sheet-gasket materials, form-in-place gaskets, and in certain cases, gaskets cut from sheets. The test shall be conducted with both specimen and apparatus at a required temperature. The compressibility and recovery shall be calculated.

Scope

1.1 This test method covers determination of the short-time compressibility and recovery at room temperature of sheet-gasket materials, form-in-place gaskets, and in certain cases, gaskets cut from sheets. It is not intended as a test for compressibility under prolonged stress application, generally referred to as "creep," or for recovery following such prolonged stress application, the inverse of which is generally referred to as "compression set." Also, it is not intended for tests at other than room temperature. A resiliency characteristic (the amount recovered expressed as a percentage of the compressed thickness) may also be calculated from the test data where desired.

1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 09.02
Developed by Subcommittee: F03.20
Pages: 4
DOI: 10.1520/F0036-99R03
ICS Code: 21.140