Standard Historical Last Updated: May 02, 2012 Track Document
ASTM D902-06

Standard Test Methods for Flexible Resin-Coated Glass Fabrics and Glass Fabric Tapes Used for Electrical Insulation

Standard Test Methods for Flexible Resin-Coated Glass Fabrics and Glass Fabric Tapes Used for Electrical Insulation D0902-06 ASTM|D0902-06|en-US Standard Test Methods for Flexible Resin-Coated Glass Fabrics and Glass Fabric Tapes Used for Electrical Insulation Standard new BOS Vol. 10.01 Committee D09
$ 75.00 In stock

Significance and Use

The electrical properties of resin-coated glass fabrics are affected by their temperature and moisture content. For this reason it is necessary to control these properties for a specified time immediately prior to testing in order to attain reasonably good reproducibility of test values. The time of exposure to the conditioning atmosphere must be long enough to permit the test specimen to reach a relatively stable value. Usually the moisture content of these materials has little effect on the mechanical properties.

Scope

1.1 These test methods cover procedures for the testing of resin-coated glass fabrics and glass fabric tapes (Note 1) to be used as electrical insulation.

Note 1 - Methods of testing varnished cloths and tapes are given in Methods D 295.

1.2 The warp threads in fabrics are the threads that are parallel with the length dimension as manufactured.

1.3 The procedures appear as follows:

1.4 The values stated in inch-pound units are to be regarded as the standard. The values in parentheses are for information only.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific warning statement are given in 35.1.1 and 58.1.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 10.01
Developed by Subcommittee: D09.07
Pages: 8
DOI: 10.1520/D0902-06
ICS Code: 29.035.30