ASTM D885-07e1

    Standard Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from Manufactured Organic-Base Fibers

      Format Pages Price  
    PDF 31 $86.00   ADD TO CART

    1. Scope

    1.1 These test methods cover the testing of industrial filament yarns made wholly of manufactured organic-base fibers, cords twisted from such yarns, fabrics woven from such cords, and products that are made specifically for use in the manufacture of pneumatic tires. They may be applied to similar yarns and cords used for reinforcing other rubber goods and for other industrial applications. The test methods apply to nylon, polyester, and rayon yarns and tire cords twisted from such yarns and to fabrics made from such cords. The yarn or cord may be wound on cones, tubes, bobbins, spools, or beams; may be woven into fabric; or may be in some other form. The methods include testing procedure only and include no specifications or tolerances.

    1.2 No procedure is included for the determination of fatigue resistance of cord, but several commonly used procedures for the measurement of fatigue resistance of cords in rubber were published in the appendix of these test methods in the 1967 Annual Book of ASTM Standards, Part 24, and in earlier issues of Test Methods D 885.

    1.3 The sections on "Growth of Conditioned Yarns and Cords," "Properties of Yarns and Cords at Elevated Temperature," and "Properties of Wet Yarns and Cords" have been moved to as non-mandatory informational items because of their very limited use by the industry and because precision and bias statements are not included.

    1.4 This standard includes the following sections:

    SectionAdhesion of Cord to Elastomers34Bibliography of Tire Cord Test MethodsX5Breaking Strength (Force) of Yarns and Cords at Elevated Tempera-tureX2.3Breaking Strength (Force) of Conditioned Yarns and Cords16Breaking Strength (Force) of Oven-Dried Rayon Yarns and Cords23Breaking Strength (Force) of Rayon Yarns and Cords at SpecifiedMoisture Regain Level, Adjustment of17Breaking Tenacity of Conditioned Yarns and Cords18Breaking Tenacity of Oven-Dried Rayon Yarns and Cords24Breaking Toughness of Yarns and Cords28Commercial Mass9Conditioning7Contraction of Wet Yarns and CordsX3Count of Tire Cord Fabric37Dip (Adhesive) Solids Pickup on Yarns and Cords33Elongation at Break of Conditioned Yarns and Cords19Elongation at Break of Oven-Dried Rayon Yarns and Cords25Elongation of Rayon Yarns and Cords at a Specified Moisture RegainLevel, Adjustment of Observed20Extractable Matter in Yarns and Cords32Force at Specified Elongation (FASE) of Conditioned Yarns andCords21Force at Specified Elongation (FASE) of Oven-Dried Rayon Yarns andCords26Growth of Conditioned Yarns and CordsX1Identification of Fibers8Keywords40Linear Density11Mass of per Unit Area of Tire Cord Fabric36Modulus of Conditioned Yarns and Cords22Moisture Regain, Actual10Precision and Bias of Certain Yarn and Cord Tests3935 toProperties of Tire Cord Fabric38Sampling6Shrinkage Force of Conditioned Yarns and Cords at Elevated Temper-atureX2.5Shrinkage of Conditioned Yarns and Cords at Elevated TemperatureX2.4Significance and Use, General5Significance and Use, Tensile Properties14SI Calculations (examples for work-to-break, specific work-to-break,and breaking toughness)X4Stiffness of Fabric3812 to Tensile Properties of Yarns and Cords28Terminology3Thickness of Cords31Twist in Yarns and Cords30Width of Tire Cord Fabric35Work-to-Break of Yarns and Cords27

    1.5 These test methods show the values in both SI and inch-pound units. SI units is the technically correct name for the system of metric units known as the International System of Units. Inch-pound units is the technically correct name for the customary units used in the United States. The values stated in either acceptable metric units or other units shall be regarded separately as standard. The values expressed in each system may not be exact equivalents; therefore, each system must be used independently of each other, without combining values in any way.

    1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

    2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    ASTM Standards

    D76 Specification for Tensile Testing Machines for Textiles

    D123 Terminology Relating to Textiles

    D276 Test Methods for Identification of Fibers in Textiles

    D1423 Test Method for Twist in Yarns by Direct-Counting

    D1776 Practice for Conditioning and Testing Textiles

    D1777 Test Method for Thickness of Textile Materials

    D1907 Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method

    D1909 Standard Table of Commercial Moisture Regains for Textile Fibers

    D2257 Test Method for Extractable Matter in Textiles

    D2258 Practice for Sampling Yarn for Testing

    D2462 Test Method for Moisture in Wool by Distillation With Toluene

    D2494 Test Method for Commercial Mass of a Shipment of Yarn or Manufactured Staple Fiber or Tow

    D2654 Test Method for Moisture in Textiles

    D3774 Test Method for Width of Textile Fabric

    D3775 Test Method for Warp (End) and Filling (Pick) Count of Woven Fabrics

    D3776 Test Methods for Mass Per Unit Area (Weight) of Fabric

    D4393 Test Method for Strap Peel Adhesion of Reinforcing Cords or Fabrics to Rubber Compounds

    D4776 Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure

    D4848 Terminology Related to Force, Deformation and Related Properties of Textiles

    D6477 Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics

    ICS Code

    ICS Number Code 83.160.01 (Tyres in general)

    UNSPSC Code

    UNSPSC Code 25172507(Tire cord); 11151500(Fibers)

    Referencing This Standard
    Link Here
    Link to Active (This link will always route to the current Active version of the standard.)

    DOI: 10.1520/D0885-07E01

    Citation Format

    ASTM D885-07e1, Standard Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from Manufactured Organic-Base Fibers, ASTM International, West Conshohocken, PA, 2007,

    Back to Top