SUPERSEDED (click for Active standard)
| ||Format||Pages||Price|| |
|4||$54.00||  ADD TO CART|
1.1 This guide covers procedures for the design of stabilization of soil and soil-like materials using self-cementing coal fly ash for roadway applications, treatment of expansive subgrade or organic subgrade, and limiting settlement of fills below buildings. The coal fly ash covered in this method includes self-cementing fly ashes described in Specification D5239.
1.2 The testing and engineering practices for self-cementing coal fly ash are similar to generally accepted practices for soil stabilization with fly ash and other pozzolans that require lime.
1.3 The test methods in this guide are applicable to the characterization of mechanical properties of in situ mixed self-cementing fly ash stabilized materials. There are other related fly ash stabilization standards. Practice D5239 can be used to characterize the general types of fly ash for use in soil stabilization. Specification C593 can be used to evaluate the performance of fly ash and other pozzolans that require lime soil stabilization. Guide E2277 can be used to characterize properties of fly ash and bottom ash in structural fills and related design and construction considerations.
1.4 The standard units are the SI units, unless other units are specified.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.6 This guide offers an organized collection of information or a series of options and does not recommend a specific course of action. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this guide may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project’s many unique aspects. The word “Standard” in the title of this document means only that the document has been approved through the ASTM consensus process.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
C593 Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization
C597 Test Method for Pulse Velocity Through Concrete
D75 Practice for Sampling Aggregates
D653 Terminology Relating to Soil, Rock, and Contained Fluids
D698 Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft3 (600 kN-m/m3))
D1557 Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))
D1883 Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
D4609 Guide for Evaluating Effectiveness of Admixtures for Soil Stabilization
D5102 Test Methods for Unconfined Compressive Strength of Compacted Soil-Lime Mixtures
D5239 Practice for Characterizing Fly Ash for Use in Soil Stabilization
D5918 Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils
E2201 Terminology for Coal Combustion Products
E2277 Guide for Design and Construction of Coal Ash Structural Fills
TRB (Transportation Research Board) StandardNCHRP 1-28A
AASHTO (American Association of State Highway and Transportation Officials) StandardAASHTO T 307
ICS Number Code 93.020 (Earth works. Excavations. Foundation construction. Underground works)
UNSPSC Code 11111501(Soil)
|Link to Active (This link will always route to the current Active version of the standard.)|
ASTM D7762-11, Standard Practice for Design of Stabilization of Soil and Soil-Like Materials with Self-Cementing Fly Ash, ASTM International, West Conshohocken, PA, 2011, www.astm.orgBack to Top