SUPERSEDED (click for Active standard)
| ||Format||Pages||Price|| |
|16||$67.00||  ADD TO CART|
1.1 This test method describes an in-situ penetration plus expansion test. The test is initiated by forcing the steel, flat plate, dilatometer blade , with its sharp cutting edge, into a soil. Each test consists of an increment of penetration, generally vertical, followed by the expansion of a flat, circular, metallic membrane into the surrounding soil. The test provides information about the soil's in-situ stratigraphy, stress, strength, compressibility, and pore-water pressure for use in the design of earthworks and foundations.
1.2 This method includes specific requirements for the preliminary reduction of dilatometer test data. It does not specify how to assess or use soil properties for engineering design.
1.3 This method applies best to those sands, silts, clays, and organic soils that can be readily penetrated with the dilatometer blade, preferably using static push (see 4.2). Test results for soils containing primarily gravel-sized particles and larger may not be useful without additional research.
1.4 This method is not applicable to soils that cannot be penetrated by the dilatometer blade without causing significant damage to the blade or its membrane.
1.5 The American Society for Testing and Materials takes no position respecting the validity of any patent rights asserted in connection with any item mentioned in this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the risk of infringement of such rights, are entirely their own responsibility.
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
D653 Terminology Relating to Soil, Rock, and Contained Fluids
D1586 Test Method for Penetration Test (SPT) and Split-Barrel Sampling of Soils
D2435 Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading
D3441 Test Method for Mechanical Cone Penetration Tests of Soil
D3740 Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
D5778 Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils
D6026 Practice for Using Significant Digits in Geotechnical Data
ICS Number Code 19.060 (Mechanical testing)
UNSPSC Code 11111800(Clays); 41113900(Soil measuring equipment)
|Link to Active (This link will always route to the current Active version of the standard.)|
ASTM D6635-01(2007), Standard Test Method for Performing the Flat Plate Dilatometer, ASTM International, West Conshohocken, PA, 2007, www.astm.orgBack to Top