Standard Historical Last Updated: Dec 31, 2010 Track Document
ASTM D6280-98(2003)

Standard Specification for Zinc Phosphate Pigments

Standard Specification for Zinc Phosphate Pigments D6280-98R03 ASTM|D6280-98R03|en-US Standard Specification for Zinc Phosphate Pigments Standard new BOS Vol. 06.03 Committee D01
$ 75.00 In stock

Abstract

This specification covers three types of pigments commercially known as zinc phosphate each of which may or may not be available in specific grades delineated by particle size or oil absorption. The following types of pigments are: Type I which is zinc phosphate, dihydrate predominant, Type II which is zinc phosphate, dihydrate tetrahydrate mixture, and Type III which is zinc phosphate, tetrahydrate predominant. Zinc phosphate functions as both a chemical and a pigment. As a pigment it is used in a variety of applications including that of corrosion inhibiting paints. The pigments shall be subjected to the following tests: specific gravity test, oil absorption test, Hegman grind test, coarse particles test, pH test, specific resistance test, moisture test, and loss on ignition test.

Scope

1.1 This specification covers three types of pigments commercially known as zinc phosphate each of which may or may not be available in specific grades delineated by particle size or oil absorption.

1.1.1 Type I—Zinc Phosphate, dihydrate predominant.

1.1.2 Type II—Zinc Phosphate, dihydrate tetrahydrate mixture.

1.1.3 Type III—Zinc Phosphate, tetrahydrate predominant.

1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 06.03
Developed by Subcommittee: D01.31
Pages: 5
DOI: 10.1520/D6280-98R03
ICS Code: 83.040.30; 87.060.10