Standard Historical Last Updated: Feb 03, 2017 Track Document
ASTM D5786-95(2012)

Standard Practice for (Field Procedure) for Constant Drawdown Tests in Flowing Wells for Determining Hydraulic Properties of Aquifer Systems

Standard Practice for (Field Procedure) for Constant Drawdown Tests in Flowing Wells for Determining Hydraulic Properties of Aquifer Systems D5786-95R12 ASTM|D5786-95R12|en-US Standard Practice for (Field Procedure) for Constant Drawdown Tests in Flowing Wells for Determining Hydraulic Properties of Aquifer Systems Standard new BOS Vol. 04.08 Committee D18
$ 66.00 In stock

Significance and Use

5.1 Constant drawdown test procedures are used with appropriate analytical procedures to determine transmissivity, hydraulic conductivity, and storage coefficient of aquifers.

Scope

1.1 This practice covers the methods for controlling drawdown and measuring discharge rates and head to analyze the hydraulic properties of an aquifer or aquifers.

1.2 This practice is used in conjunction with analytical procedures such as those of Jacob and Lohman (1)/(2),2 and Hantush (3)/(4).

1.3 The appropriate field and analytical procedures for determining hydraulic properties of aquifer systems are selected as described in Guide D4043.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.5 This practice offers a set of instructions for performing one or more specific operations. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this practice may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project's many unique aspects. The word “Standard” in the title of this document means only that the document has been approved through the ASTM consensus process.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 04.08
Developed by Subcommittee: D18.21
Pages: 3
DOI: 10.1520/D5786-95R12
ICS Code: 93.160