SUPERSEDED (click for Active standard)
| ||Format||Pages||Price|| |
|7||$60.00||  ADD TO CART|
1.1 This guide covers the application and subsequent documentation of a ground-water flow model to a particular site or problem. In this context, "ground-water flow model" refers to the application of a mathematical model to the solution of a site-specific ground-water flow problem.
1.2 This guide illustrates the major steps to take in developing a ground-water flow model that reproduces or simulates an aquifer system that has been studied in the field. This guide does not identify particular computer codes, software, or algorithms used in the modeling investigation.
1.3 This guide is specifically written for saturated, isothermal, ground-water flow models. The concepts are applicable to a wide range of models designed to simulate subsurface processes, such as variably saturated flow, flow in fractured media, density-dependent flow, solute transport, and multiphase transport phenomena; however, the details of these other processes are not described in this guide.
1.4 This guide is not intended to be all inclusive. Each ground-water model is unique and may require additional procedures in its development and application. All such additional analyses should be documented, however, in the model report.
1.5 This guide is one of a series of standards on ground-water model applications. Other standards have been prepared on environmental modeling, such as Practice E 978.
This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to us
1.6 This guide offers an organized collection of information or a series of options and does not recommend a specific course of action. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this guide may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project's many unique aspects. The word "Standard" in the title of this document means only that the document has been approved through the ASTM consensus process.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
D653 Terminology Relating to Soil, Rock, and Contained Fluids
D5490 Guide for Comparing Groundwater Flow Model Simulations to Site-Specific Information
D5609 Guide for Defining Boundary Conditions in Groundwater Flow Modeling
D5610 Guide for Defining Initial Conditions in Groundwater Flow Modeling
D5611 Guide for Conducting a Sensitivity Analysis for a Groundwater Flow Model Application
D5981 Guide for Calibrating a Groundwater Flow Model Application
D6033 Guide for Describing the Functionality of a Groundwater Modeling Code
|Link to Active (This link will always route to the current Active version of the standard.)|
ASTM D5447-04, Standard Guide for Application of a Ground-Water Flow Model to a Site-Specific Problem, ASTM International, West Conshohocken, PA, 2004, www.astm.orgBack to Top