Standard Historical Last Updated: Jul 15, 2013 Track Document
ASTM D5106-08

Standard Specification for Steel Slag Aggregates for Bituminous Paving Mixtures

Standard Specification for Steel Slag Aggregates for Bituminous Paving Mixtures D5106-08 ASTM|D5106-08|en-US Standard Specification for Steel Slag Aggregates for Bituminous Paving Mixtures Standard new BOS Vol. 04.03 Committee D04
$ 66.00 In stock

Abstract

This specification covers crushed steel slag coarse and fine aggregates suitable for use in bituminous paving mixtures. The coarse and fine aggregates shall consist of hard, tough, durable pieces of steel slag, and shall be processed, as necessary, by crushing or screening, or both, and magnetic separation for the removal of metallics. At the time of delivery, the aggregates shall not contain injurious amounts of foreign materials such as clay, loam, wood, tramp metal, unhydrated lime, or other deleterious materials. The physical requirements for which the aggregates shall be tested on and consequently conform to are grading and fineness modulus, polishing characteristics, soundness, degradation, expansion, friable particles, stripping, adherent coatings, crushed count, plasticity index, leaching; and environmental stability.

Scope

1.1 This specification covers crushed steel slag coarse and fine aggregates suitable for use in bituminous paving mixtures.

1.2 Steel slag coarse and fine aggregates are currently being used entirely (Note 1) or combined with other mineral aggregates, such as those covered in Specification D 692 or D 1073, to produce paving mixtures similar to those described in Specification D 3515 or D 4215.

Note 1—When 100 % of the coarse aggregate in a bituminous mixture is steel slag, the amount of steel slag fines in that mixture may be limited to prevent bulking.

1.3 The values stated in SI units are to be regarded as standard. The values shown in parentheses are for information only.

1.4 The text of this specification references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 04.03
Developed by Subcommittee: D04.50
Pages: 3
DOI: 10.1520/D5106-08
ICS Code: 91.100.15