Standard Historical Last Updated: Feb 18, 2021 Track Document
ASTM D4713-92(2002)

Standard Test Methods for Nonvolatile Content of Heatset and Liquid Printing Ink Systems

Standard Test Methods for Nonvolatile Content of Heatset and Liquid Printing Ink Systems D4713-92R02 ASTM|D4713-92R02|en-US Standard Test Methods for Nonvolatile Content of Heatset and Liquid Printing Ink Systems Standard new BOS Vol. 06.02 Committee D01
$ 66.00 In stock

Scope

1.1 These test methods cover the determination of weight content of nonvolatile matter in two types of printing inks.

1.2 Test Method A is applicable to heatset-type printing inks and resin solutions; solvents in such systems typically have initial boiling points in the range from 240 to 275°C (470 to 535°F) and vapor pressures less than 0.2 mm Hg.

1.3 Test Method B is applicable to liquid-type printing inks and vehicles based on aqueous or organic solvents that evaporate readily at ordinary room temperatures.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Note 1—Test Method A (for heatset systems) specifies a specimen film thickness that is much thinner than those produced by related test methods; one exception is Test Method B in Test Methods D 1259, which is recommended as a referee test.

Note 2—Test Method B (for liquid ink systems) is similar to Test Method D 2369 except that a solvent is not required for spreading the test specimen.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 06.02
Developed by Subcommittee: D01.56
Pages: 3
DOI: 10.1520/D4713-92R02
ICS Code: 87.080