Standard Historical Last Updated: Oct 24, 2012 Track Document
ASTM D4627-92(2007)

Standard Test Method for Iron Chip Corrosion for Water-Dilutable Metalworking Fluids

Standard Test Method for Iron Chip Corrosion for Water-Dilutable Metalworking Fluids D4627-92R07 ASTM|D4627-92R07|en-US Standard Test Method for Iron Chip Corrosion for Water-Dilutable Metalworking Fluids Standard new BOS Vol. 05.02 Committee D02
$ 66.00 In stock

Significance and Use

The results obtained by this test are a useful guideline in determining the ability of water diluted metalworking fluids to prevent or minimize rust under specific conditions. There is usually a relationship between the results of this test and a similar ability of the subject coolant to prevent rust on nested parts or in drilled holes containing chips, etc. It must be understood, however, that conditions, metal types, etc. found in practice will not correlate quantitatively with these controlled laboratory conditions. The procedure may not be able to differentiate between two products with poor rust control due to the wide spacing between test dilutions.

Scope

1.1 This test method covers evaluation of the ferrous corrosion control characteristics of water-dilutable metalworking fluids.

1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses re for information only.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 05.02
Developed by Subcommittee: D02.L0.01
Pages: 3
DOI: 10.1520/D4627-92R07
ICS Code: 75.080; 75.100