Standard Historical Last Updated: Dec 31, 2010 Track Document
ASTM D3018/D3018M-10

Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules

Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules D3018_D3018M-10 ASTM|D3018_D3018M-10|en-US Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules Standard new BOS Vol. 04.04 Committee D08
$ 66.00 In stock

Abstract

This specification covers mineral granule-surfaced asphalt roofing shingles. Covered here are the self-sealing (Type I) and non-self-sealing (Type II) types of shingles. The shingles shall consist of organic felt or glass mat(s) saturated or impregnated, and coated on both sides with a hot asphaltic material and completely surfaced on the weather side with mineral granules embedded in the coating. The reverse side of the shingles shall be covered with a suitable material to prevent the shingles from sticking together in the package, causing possible damage upon being unpacked at ambient temperatures. Type I shingles shall have a factory-applied adhesive that will seal the shingles together after application. Both types shall meet the conditions for Class A fire exposure, and loss and behaviour on heating tests. Type I shingles shall pass an additional wind resistance test.

Scope

1.1 This specification covers granule-surfaced asphalt roofing shingles that meet the conditions for Class A fire test, behavior on heating, and wind testing.

1.2 Shingles meeting this specification are intended to be applied with a headlap of not less than 51 mm [2 in.].

1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 04.04
Developed by Subcommittee: D08.02
Pages: 2
DOI: 10.1520/D3018_D3018M-10
ICS Code: 91.100.15