Standard Historical Last Updated: Aug 16, 2017 Track Document
ASTM D2842-97

Standard Test Method for Water Absorption of Rigid Cellular Plastics

Standard Test Method for Water Absorption of Rigid Cellular Plastics D2842-97 ASTM|D2842-97|en-US Standard Test Method for Water Absorption of Rigid Cellular Plastics Standard new BOS Vol. 08.02 Committee D20
$ 75.00 In stock

Scope

1.1 This test method covers the determination of the water absorption of rigid cellular plastics by measuring the change in buoyant force resulting from immersion under a 5.1-cm (2-in.) head of water for the specified immersion period for 96 h is standard.

1.2 This test method describes two procedures that may be used to measure the change in buoyant force. Procedure A should be used for materials that either experience rapid water absorption or that show an increase in volume during the exposure period, or both. Materials that do not exhibit either of these characteristics should be evaluated by Procedure B.

1.3 For specific applications, immersion periods varying from the normal 96-h test requirement shall be agreed upon between the manufacturer and the purchaser.

1.4 The values stated in SI units are to be regarded as the standard.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Note 1—This test method and ISO 2896 are technically equivalent.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 08.02
Developed by Subcommittee: D20.22
Pages: 10
DOI: 10.1520/D2842-97
ICS Code: 83.100