Standard Historical
Active: ASTM D2252-18
Last Updated: Aug 15, 2018 Track Document
ASTM D2252-05(2009)

Standard Specification for Fineness of Types of Alpaca (Withdrawn 2018)

Standard Specification for Fineness of Types of Alpaca (Withdrawn 2018) D2252-05R09 ASTM|D2252-05R09|en-US Standard Specification for Fineness of Types of Alpaca (Withdrawn 2018) Standard new BOS Vol. 07.01 Committee D13
$ 66.00 In stock

Significance and Use

This specification for fineness is intended as a guide for production, preparation, and marketing (Note 1) by comparing the average fiber diameter of a measured specimen with the fineness specifications for the various types listed in Table 1. The standard deviation which expresses measured variability of a specimen may be compared with the average shown in Table X2.1.

Note 1—Test Method D 2130 does not include any values for the precision to be expected in the testing of alpaca fibers. In an interlaboratory test in which six laboratories each made one test on each of six type samples, HTB-CB, HAXB-CB, HAAB-CB, HAB-CB, HLPB-CL, and HSKB-CL, the coefficient of variation of the average fiber diameters between laboratories, including test variation, was 3.2, 4.7, 3.8, 4.5, 2.2, and 0.93 % for the respective alpaca types.

TABLE 1 Fineness Specifications for Types of Alpaca

TypeAverage Diameter, μm
T Extra under 22.00
T 22.00 to 24.99
X 22.00 to 24.99
AA 25.00 to 29.99
A 30.00 to 35.99
SK over 30.00
LP over 30.00

Abstract

This specification is applicable in the classification of alpaca into types according to fineness. Five types of alpaca have been classified according to its average diameter limit, namely Type T Extra, Type T, Type X, Type AA, Type A, Type SK, and Type LP.

Scope

1.1 This specification is applicable in the classification of alpaca into types according to fineness.

1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 07.01
Developed by Subcommittee: D13.13
Pages: 3
DOI: 10.1520/D2252-05R09
ICS Code: 59.060.10