Standard Historical Last Updated: Aug 17, 2018 Track Document
ASTM D2196-15

Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer

Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer D2196-15 ASTM|D2196-15|en-US Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer Standard new BOS Vol. 06.01 Committee D01
$ 75.00 In stock

Significance and Use

3.1 Test Method A is used for determining the apparent viscosity at a given rotational speed, although viscosities at two or more speeds give better characterization of a non-Newtonian material than does a single viscosity measurement.

3.2 With Test Methods B and C, the extent of shear thinning is indicated by the drop in viscosity with increasing rotational speed. The degree of thixotropy is indicated by comparison of viscosities at increasing and decreasing rotational speeds (Test Method B), viscosity recovery (Test Method B), or viscosities before and after high shear (combination of Test Methods B and C). The high-shear treatment in Test Method C approximates shearing during paint application. The viscosity behavior measured after high shear is indicative of the characteristics of the paint soon after application.

Scope

1.1 These test methods cover the determination of the apparent viscosity and the shear thinning and thixotropic properties of non-Newtonian materials in the shear rate range from 0.1 to 50 s−1 using a rotational viscometer operating in a fluid of “infinite” dimensions.

1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.3 This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 06.01
Developed by Subcommittee: D01.24
Pages: 5
DOI: 10.1520/D2196-15
ICS Code: 17.060