ASTM D1248-05

    Standard Specification for Polyethylene Plastics Extrusion Materials For Wire and Cable


      Format Pages Price  
    PDF 9 $60.00   ADD TO CART

    Active (view current version of standard)

    Other Historical Standards

    Work Item(s) - proposed revisions of this standard

    ASTM License Agreement

    More D20.15 Standards Related Products


    1. Scope

    1.1 This specification provides for the identification of polyethylene plastics extrusion materials for wire and cable in such a manner that the seller and the purchaser can agree on the acceptability of different commercial lots or shipments. The tests involved in this specification are intended to provide information for identifying materials according to the types, classes, categories, and grades covered. It is not the function of this specification to provide specific engineering data for design purposes.

    1.2 This specification does not allow for the use of recycled plastics (see Note 0).

    1.3 The values stated in SI units are to be regarded as the standard.

    The following safety hazards caveat pertains only to the test method portion, Section , of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

    Note 2

    No ISO equivalent.

    Note 3

    This standard has undergone major revision from the reapproval of 1989 and now covers only polyethylene for wire and cable applications. For information regarding molding and extrusion materials, see Specification D 4976. For information regarding plastic pipe materials, see Specification D 3350.

    Note 0

    See Guide D 5033 for information and definitions related to recycled plastics.


    2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    ASTM Standards

    D150 Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation

    D257 Test Methods for DC Resistance or Conductance of Insulating Materials

    D618 Practice for Conditioning Plastics for Testing

    D638 Test Method for Tensile Properties of Plastics

    D746 Test Method for Brittleness Temperature of Plastics and Elastomers by Impact

    D792 Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement

    D1238 Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer

    D1505 Test Method for Density of Plastics by the Density-Gradient Technique

    D1531 Test Methods for Relative Permittivity (Dielectric Constant) and Dissipation Factor by Fluid Displacement Procedures

    D1603 Test Method for Carbon Black Content in Olefin Plastics

    D1693 Test Method for Environmental Stress-Cracking of Ethylene Plastics

    D2565 Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications

    D2633 Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable

    D2839 Practice for Use of a Melt Index Strand for Determining Density of Polyethylene

    D2951 Test Method for Resistance of Types III and IV Polyethylene Plastics to Thermal Stress-Cracking

    D3182 Practice for RubberMaterials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets

    D3349 Test Method for Absorption Coefficient of Ethylene Polymer Material Pigmented with Carbon Black

    D3350 Specification for Polyethylene Plastics Pipe and Fittings Materials

    D3636 Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials

    D3892 Practice for Packaging/Packing of Plastics

    D4329 Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics

    D4703 Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets

    D4976 Specification for Polyethylene Plastics Molding and Extrusion Materials

    D6360 Practice for Enclosed Carbon-Arc Exposures of Plastics

    D7209 Guide for Waste Reduction, Resource Recovery, and Use of Recycled Polymeric Materials and Products

    E1131 Test Method for Compositional Analysis by Thermogravimetry

    G151 Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources

    G153 Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials

    G154 Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials

    G155 Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials

    Federal Specification

    L-P-390C


    ICS Code

    ICS Number Code 83.140.99 (Other rubber and plastic products)

    UNSPSC Code

    UNSPSC Code 13111016(Polyethylene)


    Referencing This Standard
    Link Here
    Link to Active (This link will always route to the current Active version of the standard.)

    DOI: 10.1520/D1248-05

    Citation Format

    ASTM D1248-05, Standard Specification for Polyethylene Plastics Extrusion Materials For Wire and Cable, ASTM International, West Conshohocken, PA, 2005, www.astm.org

    Back to Top