Standard Historical Last Updated: Dec 31, 2010 Track Document
ASTM D1155-03

Standard Test Method for Roundness of Glass Spheres

Standard Test Method for Roundness of Glass Spheres D1155-03 ASTM|D1155-03|en-US Standard Test Method for Roundness of Glass Spheres Standard new BOS Vol. 06.02 Committee D01
$ 66.00 In stock

Significance and Use

The roundness of glass spheres is one measureable aspect relating to their performance as a retroreflective media. The function of this test method is to measure the percent of true spheres as related to compliance with applicable specifications.

Note 1—This method has been used in other industrial areas outside the intended scope of this test method.


FIG. 1 Apparatus for Roundness Test of Glass Spheres

Scope

1.1 This test method covers the determination of the percent of true spheres in glass spheres used for retroreflective marking purposes and industrial uses.

1.2 This test method includes two procedures as follows:

1.2.1 Procedure A in which the selected specimen is split into two size ranges or groups prior to separation into true spheres and irregular particles, and

1.2.2 Procedure B in which the selected specimen is split into five size ranges or groups prior to separation.

1.2.3 In determining compliance with specification requirements, either Procedure A or Procedure B may be used. Where tests indicate failure to meet the specified percent of true spheres and irregular particles, the referee test shall be made in accordance with Procedure B.

1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 06.02
Developed by Subcommittee: D01.44
Pages: 3
DOI: 10.1520/D1155-03
ICS Code: 81.040.30