Standard Historical Last Updated: May 01, 2019 Track Document
ASTM C458/C458M-98(2011)e1

Standard Test Method for Organic Fiber Content of Asbestos-Cement Products

Standard Test Method for Organic Fiber Content of Asbestos-Cement Products C0458_C0458M-98R11E01 ASTM|C0458_C0458M-98R11E01|en-US Standard Test Method for Organic Fiber Content of Asbestos-Cement Products Standard new BOS Vol. 04.05 Committee C17
$ 66.00 In stock

Abstract

This test method covers the determination of the organic fiber content of asbestos-cement products. Three apparatuses shall be used: sieve; drying oven; and an apparatus for determination of total carbon by direct combustion. Hydrochloric acid should be used as a reagent. A calculation shall be made to determine the organic fiber content. Repeatability of the mass of organic fiber content shall be determined as low or high concentration.

Scope

1.1 This test method covers the determination of the organic fiber content of asbestos-cement products.

1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.3 Warning—Breathing of asbestos dust is hazardous. Asbestos and asbestos products present demonstrated health risks for users and for those with whom they come into contact. In addition to other precautions, when working with asbestos-cement products, minimize the dust that results. For information on the safe use of chrysotile asbestos, refer to Safe Use of Chrysotile: A Manual on Preventive and Control Measures.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. ^REFERENCE:

ASTM Standards:

C114 Test Methods for Chemical Analysis of Hydraulic Cement

D2946 Terminology for Asbestos and Asbestos–Cement Products

E11 Specification for Woven Wire Test Sieve Cloth and Test Sieves

E50 Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials

BNQ Standard:

P2639-230 Asbestos-Cement Sheets: Methods of Test and Control

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 04.05
Developed by Subcommittee: C17.03
Pages: 2
DOI: 10.1520/C0458_C0458M-98R11E01
ICS Code: 91.100.40