Standard Historical Last Updated: Dec 31, 2010 Track Document
ASTM C1288-99(2004)e1

Standard Specification for Discrete Non-Asbestos Fiber-Cement Interior Substrate Sheets

Standard Specification for Discrete Non-Asbestos Fiber-Cement Interior Substrate Sheets C1288-99R04E01 ASTM|C1288-99R04E01|en-US Standard Specification for Discrete Non-Asbestos Fiber-Cement Interior Substrate Sheets Standard new BOS Vol. 04.05 Committee C17
$ 66.00 In stock

Abstract

This standard covers dimensionally stable discrete non-asbestos fiber-cement interior substrate sheets suitable for decoration as paint, wallpaper, natural stone, tile, or resilient flooring in internal wet and dry areas. The list of materials for this specification does not include asbestos-cement flat sheets, non-asbestos fiber-cement flat sheets used for claddings, facades, curtain walls, and soffits, gypsum backing boards and coreboards, water-resistant gypsum backing boards, glass mat gypsum backing boards, fiber mat cement boards, or cement-bonded particleboards. The sheets may be coated or uncoated and are classified into four grades according to flexural strength. Materials should essentially consist of an inorganic binder or a calcium silicate binder and optional compatible process aids, fillers, and pigments. To meet property requirements, the products may be formed with or without pressure and cured under natural or accelerated conditions. All products should conform to the required values of flexural strength, density, and modulus of elasticity, and to the qualities of workmanship, finish, and appearance.

Scope

1.1 This specification covers discrete non-asbestos fiber-cement sheets manufactured to be dimensionally stable and suitable for decoration as paint, wallpaper, natural stone, tile, or resilient flooring in internal wet and dry areas.

1.2 This specification is not applicable to asbestos-cement flat sheets (Specification C 220), non-asbestos fiber cement flat sheets for exterior applications such as claddings, facades, curtain walls, and soffits (Specification C 1186), gypsum backing board and coreboard (Specification C 442), water-resistant gypsum backing board (Specification C 630), glass mat gypsum backing board (Specification C 1178), particle boards (Definitions D 1554), fiber mat cement boards (Specification C 1325 and ANSI A118.9), or cement-bonded particleboards (Specification BS 5669: Part 4) and (ISO 8335).

1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 04.05
Developed by Subcommittee: C17.02
Pages: 4
DOI: 10.1520/C1288-99R04E01
ICS Code: 91.100.40