ASTM C1184-05

    Standard Specification for Structural Silicone Sealants


      Format Pages Price  
    PDF 4 $54.00   ADD TO CART


    1. Scope

    1.1 This specification describes the properties of cold liquid applied, single-component or multicomponent, chemically curing elastomeric structural silicone sealants herein referred to as the sealant. These sealants are intended to structurally adhere components of structural sealant glazing systems.

    1.2 Only those properties for which there are industry-agreed-upon minimum acceptable requirements, as determined by available ASTM test methods, are described in this specification. Additional properties may be added as ASTM test methods for those properties become available.

    1.3 The values stated in metric (SI) units are to be regarded as the standard. The values in parentheses are for information only.

    1.4 Committee C24, with jurisdiction over this specification, is aware of two comparable standards by other organizations: ETAG No. 002 and the Chinese national standard GB16776.


    2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    ASTM Standards

    C603 Test Method for Extrusion Rate and Application Life of Elastomeric Sealants

    C639 Test Method for Rheological (Flow) Properties of Elastomeric Sealants

    C661 Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer

    C679 Test Method for Tack-Free Time of Elastomeric Sealants

    C717 Terminology of Building Seals and Sealants

    C792 Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants

    C794 Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants

    C1087 Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems

    C1135 Test Method for Determining Tensile Adhesion Properties of Structural Sealants

    C1401 Guide for Structural Sealant Glazing

    C1442 Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus

    G151 Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources

    G154 Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials

    G155 Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials

    European Organization for Technical Approvals Document

    ETAG No. 002


    ICS Code

    ICS Number Code 91.100.50 (Binders. Sealing materials)

    UNSPSC Code

    UNSPSC Code 31133710(Silicone sealant)


    Referencing This Standard
    Link Here
    Link to Active (This link will always route to the current Active version of the standard.)

    DOI: 10.1520/C1184-05

    Citation Format

    ASTM C1184-05, Standard Specification for Structural Silicone Sealants, ASTM International, West Conshohocken, PA, 2005, www.astm.org

    Back to Top