Standard Historical Last Updated: Dec 31, 2010 Track Document
ASTM C1047-05

Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base

Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base C1047-05 ASTM|C1047-05|en-US Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base Standard new BOS Vol. 04.01 Committee C11
$ 66.00 In stock

Abstract

This specification covers accessories used in conjunction with assemblies of gypsum wallboard and gypsum veneer base to protect edges and corners and to provide architectural features. Steel accessories and steel components of accessories manufactured from steel and paper in combination shall be manufactured from zinc-coated cold-roll sheet steel before application of coating. Phosphatizing or other surface treatments may be used to ensure compatibility and bond. Paper components of accessories manufactured from steel and paper in combination shall comply with requirements for thickness, tensile strength, dimensional stability, and bond of joint tape to joint compound. Accessories shall be free of twist or camber of a degree that will prevent their use in the assembly for which they are intended. Edges of accessories shall be free of burrs and sharp edges.

Scope

1.1 This specification covers accessories used in conjunction with assemblies of gypsum wallboard and gypsum veneer plaster to protect edges and corners and to provide architectural features (see Fig. 1).

1.2 The values stated in inch-pound units are to be regarded as the standard. The SI units in parentheses are provided for information purposes only. The SI equivalents of inch-pound units may be approximate.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 04.01
Developed by Subcommittee: C11.02
Pages: 3
DOI: 10.1520/C1047-05
ICS Code: 91.100.10