SUPERSEDED (click for Active standard)
| ||Format||Pages||Price|| |
|4||$48.00||  ADD TO CART|
1.1 This specification covers zinc and tin alloy wire, including zinc-aluminum, zinc-aluminum-copper, zinc-tin, zinc-tin-copper and tin-zinc, used as thermal spray wire in the electronics industry.
1.1.1 Certain alloys specified in this standard are also used as solders for the purpose of joining together two or more metals at temperatures below their melting points, and for other purposes (as noted in Annex A1). Specification B 907 covers Zinc, Tin and Cadmium Base Alloys Used as Solders which are used primarily for the purpose of joining together two or more metals at temperatures below their melting points and for other purposes (as noted in the Annex part of Specification B 907). Specification B 833 covers Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) used primarily for the corrosion protection of steel (as noted in the Annex part of Specification B 833).
1.1.2 Tin base alloys are included in this specification because their use in the electronics industry is similar to the use of certain zinc alloys but different than the major use of the tin and lead solder compositions specified in Specification B 32.
1.1.3 These wire alloys have a nominal liquidus temperature not exceeding 850°F (455°C).
1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
B32 Specification for Solder Metal
B527 Test Method for Tap Density of Metal Powders and Compounds
B833 Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion Protection of Steel
B899 Terminology Relating to Non-ferrous Metals and Alloys
B907 Specification for Zinc, Tin and Cadmium Base Alloys Used as Solders
B949 Specification for General Requirements for Zinc and Zinc Alloy Products
E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E46 Test Methods for Chemical Analysis of Lead- and Tin-Base Solder
E51 Method for Spectrographic Analysis of Tin Alloys by the Powder Technique
E87 Methods for Chemical Analysis of Lead, Tin, Antimony and Their Alloys (Photometric Method)
E536 Test Methods for Chemical Analysis of Zinc and Zinc Alloys
Federal StandardFed. Std. No. 123 Marking for Shipment (Civil Agencies)
ISO StandardsISO 3815-1 Zinc and zinc alloys Part 1: Analysis of solid samples by optical emission spectrometry ISO 3815-2
Military StandardMIL-STD-129 Marking for Shipment and Storage
ICS Number Code 25.220.20 (Surface treatment)
UNSPSC Code 23281503(Thermal spray machine)
|Link to Active (This link will always route to the current Active version of the standard.)|
ASTM B943-05, Standard Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications, ASTM International, West Conshohocken, PA, 2005, www.astm.orgBack to Top