SUPERSEDED (click for Active standard)
| ||Format||Pages||Price|| |
|9||$54.00||  ADD TO CART|
1.1 This specification covers untreated and heat-treated steel, closed-impression die forgings (Note 1) for general industrial use. Note 1—For the definition of a forging, refer General Requirements Specification A 788/A 788M.
1.2 The Grades of forgings are as follows, the choice depending on design and stress or service to be imposed:
1.2.1 Grade CA Untreated, carbon steel forgings,
1.2.2 Grades CC, CC1, and CE Annealed, normalized and tempered, carbon steel forgings,
1.2.3 Grade CF Normalized and tempered carbon steel forgings,
1.2.4 Grade CF1 Double normalized and tempered carbon steel forgings,
1.2.5 Grade CG Quenched and tempered, or normalized, quenched and tempered carbon steel forgings,
1.2.6 Grade AA Annealed, normalized, or normalized and tempered alloy steel forgings,
1.2.7 Grades AB and AC Normalized and tempered alloy steel forgings, and
1.2.8 Grades AD, AE, AF, AG, and AH Normalized, quenched, and tempered alloy steel forgings.
1.3 Unless the order specifies the applicable "M" specification designation, the forgings shall be furnished with the inch-pound units.
1.4 The values stated in either inch-pound units or SI (metric) units are to be regarded separately as standard. Within the text and tables, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
A29/A29M Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought
A275/A275M Practice for Magnetic Particle Examination of Steel Forgings
A322 Specification for Steel Bars, Alloy, Standard Grades
A370 Test Methods and Definitions for Mechanical Testing of Steel Products
A388/A388M Practice for Ultrasonic Examination of Steel Forgings
A576 Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
A788/A788M Specification for Steel Forgings, General Requirements
A921/A921M Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging
E3 Guide for Preparation of Metallographic Specimens
E45 Test Methods for Determining the Inclusion Content of Steel
E94 Guide for Radiographic Examination
E112 Test Methods for Determining Average Grain Size
E340 Practice for Macroetching Metals and Alloys
E381 Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings
E407 Practice for Microetching Metals and Alloys
ICS Number Code 77.140.85 (Iron and steel forgings)
UNSPSC Code 31301203(Steel closed die machined forgings)
|Link to Active (This link will always route to the current Active version of the standard.)|
ASTM A521 / A521M-06, Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use, ASTM International, West Conshohocken, PA, 2006, www.astm.orgBack to Top