Standard Historical Last Updated: Dec 31, 2010 Track Document
ASTM A414/A414M-09

Standard Specification for Steel, Sheet, Carbon, for Pressure Vessels

Standard Specification for Steel, Sheet, Carbon, for Pressure Vessels A0414_A0414M-09 ASTM|A0414_A0414M-09|en-US Standard Specification for Steel, Sheet, Carbon, for Pressure Vessels Standard new BOS Vol. 01.03 Committee A01
$ 66.00 In stock

Abstract

This specification covers hot-rolled carbon steel sheet for pressure vessels involving fusion welding or brazing. Tensile and yield strengths shall be determined after a tension test of the sheets. The material shall be furnished without removing the hot-rolled oxide or scale. When required, the material may be specified to be pickled or blast cleaned. When specified to be pickled or blast cleaned, the material shall be furnished oiled. When required, pickled or blast-cleaned material may be specified to be furnished dry.

Scope

1.1 This specification covers hot-rolled carbon steel sheet for pressure vessels involving fusion welding or brazing. Welding and brazing technique is of fundamental importance and shall be in accordance with commercial practices.

1.2 The following grades are included in this specification:

1.3 Hot-rolled carbon steel sheet is generally furnished in cut lengths and to decimal thickness only. Coils may be furnished, provided tension test specimens are taken to represent the middle of the slab as required by 5.1.4. The purchaser should recognize this may require cutting the coils to obtain test samples and results in half-size coils. The sheet is furnished to the following size limits:

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 01.03
Developed by Subcommittee: A01.19
Pages: 4
DOI: 10.1520/A0414_A0414M-09
ICS Code: 77.140.30; 77.140.50