Showing results 1-29 of 29 matching ACTIVE standards under the jurisdiction of F17.10 F17 Home
D2464-15 Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
D2466-15 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
See also
WK57385 proposed revision
D2467-15 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
D2609-15 Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
D2683-14 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
D2749-13 Standard Symbols for Dimensions of Plastic Pipe Fittings
D3261-16 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
F437-15 Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
See also
WK54187 proposed revision
F438-15 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
See also
WK54188 proposed revision
See also
WK57386 proposed revision
F439-13 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
See also
WK54189 proposed revision
F1055-16a Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing
See also
WK45496 proposed revision
F1498-08(2012)e1 Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings
See also
WK58476 proposed revision
F1733-13 Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing
F1807-17 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
See also
WK48849 proposed revision
See also
WK52237 proposed revision
See also
WK54144 proposed revision
F1865-09 Standard Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing
F1960-15 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
F1961-09 Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing
F1970-12e1 Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
See also
WK58481 proposed revision
F1974-09(2015) Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe
F2080-16 Standard Specification for Cold-Expansion Fittings with Metal Compression-Sleeves for Crosslinked Polyethylene (PEX) Pipe and SDR9 Polyethylene of Raised Temperature (PE-RT) Pipe
F2098-15 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert and Plastic Insert Fittings
See also
WK56610 proposed revision
F2159-14 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
See also
WK52239 proposed revision
F2176-02(2009) Standard Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct
See also
WK52313 proposed revision
F2206-14 Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE)
See also
WK44099 proposed revision
F2434-14 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing
F2735-09(2016) Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
See also
WK55733 proposed revision
F2829/F2829M-15 Standard Specification for Metric- and Inch-Sized Crosslinked Polyethylene (PEX) Pipe Systems
See also
WK59085 proposed revision
F2854-10(2016) Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing
F2880-14 Standard Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes 3/4 in. to 65 in.
Showing results 1-11 of 11 matching Proposed New Standards under the jurisdiction of F17.10 F17 Home
WK32336 New Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sanitary and Storm Drainage Sewer Basins and Fittings
WK58343 Cold-Expansion Fittings with PEX Compression-Sleeves for Crosslinked Polyethylene (PEX) Tubing
WK35775 New Specification for End Caps for Polyethylene Pressure pipe in Nominal Pipe Sizes (NPS) 2-inch to 54-inch ( 63mm to 1372mm)
WK44130 New Specification for Solid Wall Poly (Vinyl Chloride) (PVC) Fittings for Profile Wall Thermoplastic Pipe
WK59252 Plastic Mechanical Fittings for use on Outside Diameter Controlled Polyethylene Water Service Pipe
WK55216 Standard Specification for Polyethylene (PE) Branch Saddle Tees
WK55630 Mechanical Joint Adapter Fitting for Use with Polyethylene Pressure Pipe in Nominal Pipe Sizes 2 to 48 in. (50 to 1200 mm)
WK56228 Metallic Press Fittings with integral Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
WK56229 Plastic Press Fittings with integral Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
WK56615 Polyethylene (PE) Fabricated Pressure Pipe Bends (Elbows) Conveying Liquid Hydrocarbons and/or Natural Gas for Gathering and Distribution, in Nominal Iron Pipe Diameters (IPS) 4 inch to 36 inch, Manufactured by Heat Fusion Joining Gore-Pipe Miter-Cut Segments, or by Machining, or by Malleable Thermo-Bending 1
WK58477 Push-Fit Poly(Vinyl Chloride) (PVC) Mechanical Fittings for Iron Pipe Size (IPS) Outside-Diameter Pipe
Showing Results 1-3 of 3 matching WITHDRAWN standards under the jurisdiction of F17.10 F17 Home
D2468-96a Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe Fittings, Schedule 40 (Withdrawn 2003)
F845-96 Standard Specification for Plastic Insert Fittings for Polybutylene (PB) Tubing (Withdrawn 2003)
F2768-09 Standard Specification for Modified Stub ACME Thread Joint with Elastomeric Seal in Plastic Piping Components (Withdrawn 2016)
