As requested, this alert notifies you that newly published peer reviewed papers from ASTM International are available.

Click on any new paper title below to view the abstract. If you have an online subscription, the link will take you to your subscription where you can review the full document. For questions please contact ASTM's Inside Sales and Technical Support at 610-832-9585 or by email at service@astm.org.

(ACEM) Advances in Civil Engineering Materials

Determining the Optimum Content and Stirring Time of Emerging Dry Polymer for Asphalt Using Rotational Viscometer, Dynamic Shear Rheometer, and Atomic Force Microscopy
Ashkan Bozorgzad, Yongjoo Kim, Hosin “David” Lee
Page Count: 13
Published Online: 19 February 2018

Exploring Potential of Fly Ash–Bentonite Mix as a Liner Material in Waste Containment Systems Under Concept of Sponge City
Poly Buragohain, Ankit Garg, Peng Lin, Min Hong, Zhang Yi, S Sreedeep
Page Count: 25
Published Online: 20 February 2018

Extending Low-Temperature Differential Scanning Calorimetry from Paste to Mortar and Concrete to Quantify the Potential for Calcium Oxychloride Formation
Prannoy Suraneni, Jason Weiss
Page Count: 16
Published Online: 6 February 2018

Thermal Conductivity of Hydrated Paste in Cement-Based Foam Microstructure
Farnaz Batool, Vivek Bindiganavile
Page Count: 16
Published Online: 14 February 2018

(MPC) Materials Performance and Characterization

Assessment of Sputtered Chromium Oxide-Nitride Coatings
Divyeshkumar P. Dave, Nicky P. Patel, Kamlesh V. Chauhan, Sushant K. Rawal
Page Count: 10
Published Online: 20 February 2018

Development of Processing Map and Constitutive Relationship for Thermomechanical Processing of Aluminum Alloy AA2014
S. V. S. Narayana Murty, Aditya Sarkar, P. Ramesh Narayanan
Page Count: 16
Published Online: 6 February 2018

Experimental Investigations on Welding and Mechanical Characteristics of Sintered-Forged Plain Carbon Steel under Autogenous TIG Welding
T. K. Kandavel, D. Vijay
Page Count: 16
Published Online: 6 February 2018

Modeling of Heat Transfer in Rotary Furnaces Using Finite Element Approach
K. J. Akinluwade, F. P. Ibitoye, D. A. Isadare, M. O. Adeoye, A. R. Adetunji
Page Count: 11
Published Online: 26 February 2018

Optimization of Heating Cycles Prior Forging for Large Steel Ingots Based on a Simulation Model
L. F. Romano-Acosta, I. Álvarez-Elcoro, O. Zapata-Hernandez, L. Leduc-Lezama
Page Count: 16
Published Online: 14 February 2018

(JOTE) Journal of Testing and Evaluation

An Experimental Study of the Performance of Two-Component Backfilling Grout Used behind the Segmental Lining of a Tunnel-Boring Machine
Mohammad Sharghi, Hamid Chakeri, Hassan Afshin, Yilmaz Ozcelik
Page Count: 17
Published Online: 26 February 2018

Assessing Crack Susceptibility of Asphalt Concrete Mixtures with Overlay Tester
Victor M. Garcia, Alejandro Miramontes, Jose Garibay, Imad Abdallah, Soheil Nazarian
Page Count: 10
Published Online: 2 February 2018

Cohesive Property Evaluation of Crack Sealants Using a Low-Temperature Tensile Tester
Hengxiao Xue, Liping Cao, Xiangchen Hou, Yiqiu Tan
Page Count: 12
Published Online: 15 February 2018

Creep Fatigue Interaction under Different Test Variables: Mechanics and Mechanisms
Kaustav Barat, S. Sivaprasad, S. Kar, S. Tarafder
Page Count: 19
Published Online: 21 February 2018

Crumb Rubber and Silica Fume Inclusions in Pervious Concrete Pavement Systems: Evaluation of Hydrological, Functional, and Structural Properties
Snehasish Mondal, Krishna Prapoorna Biligiri
Page Count: 14
Published Online: 12 February 2018

Determination of the Thermal Conductivity Tensor of Thermally Orthotropic Materials with Transient Line Heat Source Method
Bao Chen, Yiyi Huang, Kang Zhang, Yujun Cui
Page Count: 12
Published Online: 20 February 2018

Development of Accelerated Durability Tests for Rear Suspension Components under Failure-Correlated Load
Li-Hui Zhao, Jia-Wei Yu, Tie Chen, Jun Li, Song-Lin Zheng
Page Count: 12
Published Online: 20 February 2018

Development of High Temperature Mechanical Rig for Characterizing the Viscoplastic Properties of Alloys Used in Solid Oxide Cells
Tesfaye Tadesse Molla, Fabio Greco, Kawai Kwok, Philipp Zielke, Henrik Lund Frandsen
Page Count: 12
Published Online: 20 February 2018

DNT-Based Image Illumination Refinement System with Concurrent Copyright Embedding
Jung-San Lee, Yi-Hua Wang
Page Count: 20
Published Online: 14 February 2018

Early Age Thermal Measurements of Soil-Cement Mixtures for Quality Control during Paving
W. Griffin Sullivan, Isaac L. Howard, Tim Cost, Jay Shannon
Page Count: 15
Published Online: 21 February 2018

Effect of Impact Energy in the Esso Test (Part 1: Basic Experiments and Validation of FEM Analysis)
Tomoya Kawabata, Masahito Kaneko, Shuji Aihara
Page Count: 15
Published Online: 2 February 2018

Effective Control Chart for Monitoring the Capability Stability of Non-Normal Processes Having S-Type Quality
Mou-Yuan Liao, Hsiao-Chi Ling
Page Count: 13
Published Online: 6 February 2018

Estimation of the Stress Strength Parameter for the Generalized Exponential-Poisson Distribution
S. Nadarajah, S. F. Bagheri, M. Alizadeh, E. Bahrami Samani
Page Count: 19
Published Online: 14 February 2018

Evaluation of Asphalt Effect on Water Quality Using Leaching Test and Molecular Simulation
Jun Chen, Hao Wang, Jiantao Wu, Guangji Xu
Page Count: 9
Published Online: 14 February 2018

Evaluation of Segregation in Asphalt Pavement Surface Using Concave Multifractal Distribution
Mao-ping Ran, Shenqing Xiao, Xing-lin Zhou, Wang-xin Xiao
Page Count: 10
Published Online: 12 February 2018

Experimental Study in the Modification of Mortar Samples with Incorporated Rice Husk
Jiesheng Liu, Faping Li, Xiang He, Xiaofan Liu, Rongtang Zhang
Page Count: 7
Published Online: 9 February 2018

Field Evaluation of Load-Bearing Capacity of Tire Fill Embankment Pavements
Leila Hashemian, Alireza Bayat
Page Count: 10
Published Online: 15 February 2018

Fracture-Toughness and Fatigue Crack Growth Evaluation in the Transversal Direction of the Longitudinal Weld of an API X52 Steel Pipeline
D. Angeles-Herrera, A. Albiter, R. Cuamatzi-Meléndez, G. Terán, Gilberto Ochoa-Ruiz
Page Count: 11
Published Online: 14 February 2018

Implementation of PV System Integrated DSTATCOM with Modified UVT Control Scheme for Harmonic and Neutral Current Elimination
P. Govindasamy, R. Anita
Page Count: 20
Published Online: 28 February 2018

Iterative Kernel Principal Component for Large-Scale Data Set
Weiya Shi
Page Count: 10
Published Online: 20 February 2018

Modeling of Permeation and Fracturing Grouting in Sand: Laboratory Investigations
Wen-Chieh Cheng, James C. Ni, Jack S. Shen, Zhi-Feng Wang
Page Count: 16
Published Online: 28 February 2018

Multi-Objective Genetic Algorithm for Economic Statistical Design of the T2 Control Chart with Variable Sample Size: The Updated Markov Chain Approach
Asghar Seif
Page Count: 11
Published Online: 6 February 2018

Novel Spring-Loaded Wear Test Rig to Test the Material Life of Probes Used in the Ingenious Six-Window Gauging System
Prashanth Swaminathan, Gopalakrishna Keshavanarayana
Page Count: 7
Published Online: 6 February 2018

Postweld Heat Treatment Characterization of Mild Steel (E6013) Welded Areas Using Wavelet Transform of Ultrasonic Testing Signals
Tariq M. R. Khan, Amna Maqsood, Saad A. Warraich, Saeed Khalid
Page Count: 7
Published Online: 9 February 2018

Preliminary Investigation of Predicting Permanent Deformations of Unbound Granular Materials Using Miniaturized Pressuremeter Cyclic Data
Alaa M. Shaban, Paul J. Cosentino
Page Count: 15
Published Online: 15 February 2018

Standard Testing of Glass Revisited - Experimental and Theoretical Aspects
David Z. Yankelevsky, Kevin Spiller, Jeffrey A. Packer, Michael Seica
Page Count: 13
Published Online: 15 February 2018

The Effects of Anisotropic Yield Functions on Plastic Behavior of 304 Stainless Steel
Bora Sener, Mehmet Emin Yurci
Page Count: 8
Published Online: 9 February 2018

Wear Resistance of Four Rocks Using Rotary Abrasion Test in Dry and Wet Conditions
Taegeon Lee, Seung Oh Lee, Dong-Woo Ryu, Heejung Youn
Page Count: 10
Published Online: 21 February 2018

(GTJ) Geotechnical Testing Journal

A Thermal Direct Shear Device for Testing Polymer-Bonded Sands
Louis Romero, Lenny Mendoza, Ali Nasirian, Douglas D. Cortes, Julio R. Valdes
Page Count: 8
Published Online: 28 February 2018

An Apparatus for Testing Static Fatigue at Sand Grain Contacts
Zhijie Wang, Radoslaw L. Michalowski
Page Count: 11
Published Online: 28 February 2018

An Automated Large-Scale Apparatus for 3-D Cyclic Testing of Soil-Structure Interfaces
Jian-Min Zhang, Da-Kuo Feng, Wen-Jun Hou
Page Count: 14
Published Online: 26 February 2018

An Experimental Parametric Study of Segregation in Cohesionless Soils of Embankment Dams
Sajad Asmaei, Piltan Tabatabaie Shourijeh, Seyed Mohammad Binesh, Mohammad-Hassan Ghaedsharafi
Page Count: 21
Published Online: 28 February 2018

Characterization of Self-Weight Consolidation of Fine-Grained Mine Tailings Using Moisture Sensors
Faustin Saleh-Mbemba, Michel Aubertin
Page Count: 12
Published Online: 21 February 2018

Determining the Geotechnical Characteristics of Some Sedimentary Rocks from Iran with an Emphasis on the Correlations between Physical, Index, and Mechanical Properties
Davood Fereidooni, Reza Khajevand
Page Count: 19
Published Online: 26 February 2018

Discussion of “Correlations for Fully Softened Shear Strength Parameters” by B. A. Castellanos, T. L. Brandon, and D. R. VandenBerge, This Article Was Published in Geotechnical Testing Journal, Vol. 39, No. 4, 2016. [DOI: 10.1520/GTJ20150184]
Thomas J. O’Meara
Page Count: 4
Published Online: 26 February 2018

Experimental Investigation into the Influence of Roundness and Sphericity on the Undrained Shear Response of Silty Sand Soils
Abdellah Cherif Taiba, Youcef Mahmoudi, Mostefa Belkhatir, Tom Schanz
Page Count: 15
Published Online: 28 February 2018

Miniature Centrifuge Modeling for Conventional Consolidation Test
Mehmet C. Balci, Kamil Kayabali, Ramin Asadi
Page Count: 11
Published Online: 20 February 2018


Just click on any new paper to view the paper citation page and abstract or visit www.astm.org and enter the paper title in the site search.

To reach ASTM customer service: 610-832-9585 (phone), 610-832-9555 (fax) or service@astm.org (e-mail).


If you would like to amend your alert in any way (add new categories, delete existing ones, or change of email address), first unsubscribe and then resubscribe with your new information.

To unsubscribe, click here. For other issues, please contact this address: support@astm.org.

Please note: This e-mail message was sent from a notification-only address that cannot accept incoming e-mail. Please do not reply to this message.