ASTM Volume 02.05, May 2021

    Metallic and Inorganic Coatings; Metal Powders and Metal Powder Products

    Table of Contents

    B136-84(2018) Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum

    B137-95(2014) Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum

    B177/B177M-11(2017) Standard Guide for Engineering Chromium Electroplating

    B183-18 Standard Practice for Preparation of Low-Carbon Steel for Electroplating

    B200-85(2015) Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys

    B201-80(2019) Standard Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces

    B212-17 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel

    B213-20 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel

    B214-16 Standard Test Method for Sieve Analysis of Metal Powders

    B215-20 Standard Practices for Sampling Metal Powders

    B242-99(2020) Standard Guide for Preparation of High-Carbon Steel for Electroplating

    B243-20 Standard Terminology of Powder Metallurgy

    B244-09(2021) Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments

    B252-92(2020) Standard Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings

    B253-11(2017) Standard Guide for Preparation of Aluminum Alloys for Electroplating

    B254-92(2020)e1 Standard Practice for Preparation of and Electroplating on Stainless Steel

    B276-05(2015) Standard Test Method for Apparent Porosity in Cemented Carbides

    B281-88(2019)e1 Standard Practice for Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings

    B294-17 Standard Test Method for Hardness Testing of Cemented Carbides

    B311-17 Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity

    B312-20 Standard Test Method for Green Strength of Specimens Compacted from Metal Powders

    B319-91(2020) Standard Guide for Preparation of Lead and Lead Alloys for Electroplating

    B320-60(2019) Standard Practice for Preparation of Iron Castings for Electroplating

    B322-99(2020)e1 Standard Guide for Cleaning Metals Prior to Electroplating

    B329-20 Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter

    B330-20 Standard Test Methods for Estimating Average Particle Size of Metal Powders and Related Compounds Using Air Permeability

    B331-20 Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction

    B343-92a(2020) Standard Practice for Preparation of Nickel for Electroplating with Nickel

    B368-21 Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)

    B374-06(2019) Standard Terminology Relating to Electroplating

    B380-97(2018) Standard Test Method for Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure

    B406-96(2021) Standard Test Method for Transverse Rupture Strength of Cemented Carbides

    B417-18 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel

    B438-21 Standard Specification for Bronze-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)

    B439-21 Standard Specification for Iron-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)

    B449-93(2015) Standard Specification for Chromates on Aluminum

    B456-17 Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium

    B457-67(2018) Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum

    B480-88(2017) Standard Guide for Preparation of Magnesium and Magnesium Alloys for Electroplating

    B481-68(2019) Standard Practice for Preparation of Titanium and Titanium Alloys for Electroplating

    B482-85(2019) Standard Practice for Preparation of Tungsten and Tungsten Alloys for Electroplating

    B487-20 Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of Cross Section

    B488-18 Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses

    B489-85(2018) Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals

    B490-09(2021) Standard Practice for Micrometer Bend Test for Ductility of Electrodeposits

    B499-09(2021)e1 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals

    B504-90(2017) Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method

    B507-14(2021) Standard Practice for Design of Articles to Be Electroplated on Racks

    B527-20 Standard Test Method for Tap Density of Metal Powders and Compounds

    B528-16(2020)e1 Standard Test Method for Transverse Rupture Strength of Powder Metallurgy (PM) Specimens

    B530-09(2021) Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates

    B532-85(2021) Standard Specification for Appearance of Electroplated Plastic Surfaces

    B533-85(2019) Standard Test Method for Peel Strength of Metal Electroplated Plastics

    B537-70(2019) Standard Practice for Rating of Electroplated Panels Subjected to Atmospheric Exposure

    B545-13(2021) Standard Specification for Electrodeposited Coatings of Tin

    B555-86(2018) Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test

    B556-90(2018) Standard Guide for Measurement of Thin Chromium Coatings by Spot Test

    B558-79(2019) Standard Practice for Preparation of Nickel Alloys for Electroplating

    B567-98(2021) Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method

    B568-98(2021) Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry

    B571-18 Standard Practice for Qualitative Adhesion Testing of Metallic Coatings

    B578-87(2015) Standard Test Method for Microhardness of Electroplated Coatings

    B579-73(2015) Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate)

    B580-79(2019) Standard Specification for Anodic Oxide Coatings on Aluminum

    B595-21 Standard Specification for Materials for Aluminum Powder Metallurgy (PM) Structural Parts

    B602-88(2016) Standard Test Method for Attribute Sampling of Metallic and Inorganic Coatings

    B604-91(2019) Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics

    B605-95a(2015) Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy

    B607-15 Standard Specification for Autocatalytic Nickel Boron Coatings for Engineering Use

    B610-19 Standard Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders Intended for Die Compaction

    B629-77(2019) Standard Practice for Preparation of Molybdenum and Molybdenum Alloys for Electroplating

    B630-88(2017) Standard Practice for Preparation of Chromium for Electroplating with Chromium

    B633-19 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel

    B634-14a Standard Specification for Electrodeposited Coatings of Rhodium for Engineering Use

    B635-00(2015) Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited

    B636/B636M-15 Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer

    B650-95(2018) Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates

    B651-83(2019) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope

    B657-18 Standard Guide for Metallographic Identification of Microstructure in Cemented Carbides

    B659-90(2021) Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings

    B665-19 Standard Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides

    B678-86(2017) Standard Test Method for Solderability of Metallic-Coated Products

    B679-98(2015) Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use

    B680-80(2019) Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution

    B689-97(2018)e1 Standard Specification for Electroplated Engineering Nickel Coatings

    B695-04(2016) Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel

    B696-00(2015) Standard Specification for Coatings of Cadmium Mechanically Deposited

    B697-88(2016) Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings

    B699-86(2021) Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel

    B700-20 Standard Specification for Electrodeposited Coatings of Silver for Engineering Use

    B703-17 Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter

    B727-04(2020) Standard Practice for Preparation of Plastics Materials for Electroplating

    B733-15 Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal

    B734-97(2018) Standard Specification for Electrodeposited Copper for Engineering Uses

    B748-90(2016) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope

    B761-17 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation

    B762-90(2016) Standard Test Method of Variables Sampling of Metallic and Inorganic Coatings

    B764-04(2021) Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)

    B765-03(2018) Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings

    B766-86(2015) Standard Specification for Electrodeposited Coatings of Cadmium

    B767-88(2016) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures

    B771-11(2017) Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides

    B783-19 Standard Specification for Materials for Ferrous Powder Metallurgy (PM) Structural Parts

    B795-20 Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (PF) Steel Materials

    B796-20 Standard Test Method for Nonmetallic Inclusion Content of Ferrous Powders Intended for Powder Forging (PF) Applications

    B797-20 Standard Test Method for Surface Finger-Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (PF) Steel Parts

    B809-95(2018) Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (“Flowers-of-Sulfur”)

    B816-00(2021) Standard Specification for Coatings of Cadmium-Zinc Mechanically Deposited

    B821-10(2016) Standard Guide for Liquid Dispersion of Metal Powders and Related Compounds for Particle Size Analysis

    B822-20 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering

    B823-20 Standard Specification for Materials for Copper Base Powder Metallurgy (PM) Structural Parts

    B832-93(2018) Standard Guide for Electroforming with Nickel and Copper

    B839-04(2014) Standard Test Method for Residual Embrittlement in Metallic Coated, Externally Threaded Articles, Fasteners, and Rod-Inclined Wedge Method

    B840-15 Standard Specification for Electrodeposited Coatings of Zinc Cobalt Alloy Deposits

    B841-18 Standard Specification for Electrodeposited Coatings of Zinc Nickel Alloy Deposits

    B842-99(2016) Standard Specification for Electrodeposited Coatings of Zinc Iron Alloy Deposits

    B848-15 Standard Specification for Powder Forged (PF) Ferrous Materials

    B849-02(2019) Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement

    B850-98(2015) Standard Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement

    B851-04(2020) Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish

    B853-16 Standard Specification for Powder Metallurgy (PM) Boron Stainless Steel Structural Components

    B855-17 Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel

    B859-21 Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis

    B866-95(2018) Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion

    B867-95(2018) Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use

    B873-17 Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417

    B874-96(2018) Standard Specification for Chromium Diffusion Coating Applied by Pack Cementation Process

    B875-96(2018) Standard Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process

    B877-96(2018) Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method

    B879-17 Standard Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys

    B883-19 Standard Specification for Metal Injection Molded (MIM) Materials

    B886-19 Standard Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides

    B887-12(2019) Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides

    B890-20 Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry

    B893-98(2018) Standard Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications

    B895-16(2020)e1 Standard Test Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy (PM) Parts/Specimens by Immersion in a Sodium Chloride Solution

    B904-00(2021) Standard Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding

    B905-00(2016) Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test

    B912-02(2018) Standard Specification for Passivation of Stainless Steels Using Electropolishing

    B915-01(2017) Standard Test Method for Measuring Static Heat Resistance of Self-Cleaning Oven Coating

    B916-01(2017) Standard Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal

    B921-08(2018) Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys

    B922-20 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption

    B923-21 Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry

    B925-15 Standard Practices for Production and Preparation of Powder Metallurgy (PM) Test Specimens

    B930-03(2017) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)

    B931-14(2018)e1 Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (PM) Parts

    B933-20 Standard Test Method for Microindentation Hardness of Powder Metallurgy (PM) Materials

    B934-15 Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (PM) Parts Using Microindentation Hardness Measurements

    B935-20 Standard Guide for Steam Treatment of Ferrous Powder Metallurgy (PM) Materials

    B939-21 Standard Test Method for Radial Crushing Strength, K, of Powder Metallurgy (PM) Bearings and Structural Materials

    B940-05(2020) Standard Practice for Testing Non-Chromate Coatings on Zinc and Cadmium Surfaces

    B946-11(2016) Standard Test Method for Surface Finish of Powder Metallurgy (PM) Products

    B962-17 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle

    B963-17 Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Surface-Connected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle

    B964-16 Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel

    B975-18e1 Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)

    B984-12(2020)e1 Standard Specification for Electrodeposited Coatings of Palladium-Cobalt Alloy for Engineering Use

    B988-18 Standard Specification for Powder Metallurgy (PM) Titanium and Titanium Alloy Structural Components

    B994/B994M-15 Standard Specification for Nickel-Cobalt Alloy Coating

    B995-15a Standard Test Method for Chloride Resistance Test for Chromium Electroplated Parts (Russian Mud Test)

    B999-15 Standard Specification for Titanium and Titanium Alloys Plating, Electrodeposited Coatings of Titanium and Titanium Alloys on Conductive and Non-Conductive Substrate

    B1000-21 Standard Practices for Casting Preparation and Test Procedure of Porcelain Enamel-lined Pipe, Fittings, and Valves for Use in the Municipal Wastewater, Sewage, and Water Treatment Industry

    C282-20 Standard Test Method for Acid Resistance of Porcelain Enamels(Citric Acid Spot Test)

    C283-13(2017) Standard Test Methods for Resistance of Porcelain Enameled Utensils to Boiling Acid

    C285-10(2020) Standard Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel

    C286-99(2017) Standard Terminology Relating to Porcelain Enamel and Ceramic-Metal Systems

    C346-87(2018) Standard Test Method for 45-deg Specular Gloss of Ceramic Materials

    C374-14(2018) Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods)

    C375-58(2016) Standard Classification of Water Used in Milling of Porcelain Enamel

    C385-58(2018) Standard Test Method for Thermal Shock Resistance of Porcelain-Enameled Utensils

    C448-88(2021) Standard Test Methods for Abrasion Resistance of Porcelain Enamels

    C536-83(2018) Standard Test Method for Continuity of Coatings in Glassed Steel Equipment by Electrical Testing

    C537-87(2018) Standard Test Method for Reliability of Glass Coatings on Glassed Steel Reaction Equipment by High Voltage

    C538-83(2018) Standard Test Method for Color Retention of Red, Orange, and Yellow Porcelain Enamels

    C539-84(2021) Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Ceramic Whiteware Materials by Interferometric Method

    C614-20 Standard Test Method for Alkali Resistance of Porcelain Enamels

    C632-88(2021) Standard Test Method for Reboiling Tendency of Sheet Steel for Porcelain Enameling

    C633-13(2017) Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings

    C660-81(2020) Standard Practices for Production and Preparation of Gray Iron Castings for Porcelain Enameling

    C664-10(2020) Standard Test Methods for Thickness of Diffusion Coating

    C703-72(2021) Standard Test Methods for Spalling Resistance of Porcelain Enameled Aluminum

    C743-87(2018) Standard Test Method for Continuity of Porcelain Enamel Coatings

    C756-87(2021) Standard Test Method for Cleanability of Surface Finishes

    C774-88(2021) Standard Test Method for Yield Strength of Enameling Steels After Straining and Firing

    C839-82(2020) Standard Test Method for Compressive Stress of Porcelain Enamels by Loaded-Beam Method

    C872-10(2021) Standard Test Method for Lead and Cadmium Release from Porcelain Enamel Surfaces

    D1730-09(2020) Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting

    D1731-09(2020) Standard Practices for Preparation of Hot-Dip Aluminum Surfaces for Painting

    D1732-03(2018) Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting

    E159-17 Standard Test Method for Loss of Mass in a Reducing Gas Atmosphere for Cobalt, Copper, Tungsten, and Iron Powders (Hydrogen Loss)

    E194-20 Standard Test Method for Acid-Insoluble Content of Copper and Iron Powders

    E1338-09(2021) Standard Guide for Identification of Metals and Alloys in Computerized Material Property Databases

    R0001- Cross Index of Standards for Metal Powders and Metal Powder Products

    More Information


    Print or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2021
       Standards: 196
       Pages: 1116

    - 2020
       Standards: 197
       Pages: 1104