ASTM Volume 15.01, March 2019

    Refractories, Activated Carbon; Advanced Ceramics

    Table of Contents

    C16-03(2018) Standard Test Method for Load Testing Refractory Shapes at High Temperatures

    C20-00(2015) Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water

    C24-09(2018) Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High-Alumina Refractory Materials

    C27-98(2018) Standard Classification of Fireclay and High-Alumina Refractory Brick

    C71-12(2018) Standard Terminology Relating to Refractories

    C92-95(2015) Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials

    C108-46(2018) Standard Symbols for Heat Transmission

    C113-14 Standard Test Method for Reheat Change of Refractory Brick

    C133-97(2015) Standard Test Methods for Cold Crushing Strength and Modulus of Rupture of Refractories

    C134-95(2016) Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick

    C135-96(2015) Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion

    C155-97(2018) Standard Classification of Insulating Firebrick

    C179-14(2019) Standard Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens

    C181-11(2018) Standard Test Method for Workability Index of Fireclay and High-Alumina Refractory Plastics

    C182-19 Standard Test Method for Thermal Conductivity of Insulating Firebrick

    C198-09(2019) Standard Test Method for Cold Bonding Strength of Refractory Mortar

    C199-84(2016) Standard Test Method for Pier Test for Refractory Mortars

    C201-93(2019) Standard Test Method for Thermal Conductivity of Refractories

    C202-19 Standard Test Method for Thermal Conductivity of Refractory Brick

    C210-95(2014) Standard Test Method for Reheat Change of Insulating Firebrick

    C288-87(2014) Standard Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide

    C357-07(2015) Standard Test Method for Bulk Density of Granular Refractory Materials

    C401-12(2018) Standard Classification of Alumina and Alumina-Silicate Castable Refractories

    C416-97(2018) Standard Classification of Silica Refractory Brick

    C417-05(2015) Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories

    C454-10(2017) Standard Test Method for Disintegration of Carbon Refractories by Alkali

    C455-07(2018) Standard Classification of Chrome, Chrome-Magnesia, Magnesia-Chrome, and Magnesia Brick

    C456-18 Standard Test Method for Hydration Resistance of Basic Bricks and Shapes

    C467-14(2018) Standard Classification of Mullite Refractories

    C492-92(2017)e1 Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite

    C544-18 Standard Test Method for Hydration of Dead-Burned Magnesite or Periclase Grain

    C545-97(2018) Standard Classification of Zircon Refractories

    C577-07(2014) Standard Test Method for Permeability of Refractories

    C583-15 Standard Test Method for Modulus of Rupture of Refractory Materials at Elevated Temperatures

    C604-18 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer

    C607-88(2016) Standard Practice for Coking Large Shapes of Carbon-Bearing Materials

    C621-09(2018) Standard Test Method for Isothermal Corrosion Resistance of Refractories to Molten Glass

    C673-97(2018) Standard Classification of Fireclay and High-Alumina Plastic Refractories and Ramming Mixes

    C704/C704M-15e1 Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature

    C767-93(2013) Standard Test Method for Thermal Conductivity of Carbon Refractories

    C830-00(2016) Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure

    C831-18 Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes

    C832-00(2015) Standard Test Method of Measuring Thermal Expansion and Creep of Refractories Under Load

    C860-15 Standard Test Method for Determining the Consistency of Refractory Castable Using the Ball-In-Hand Test

    C861-93(2014) Standard Practice for Determining Metric Dimensions of Standard Series Refractory Brick and Shapes

    C862-16 Standard Practice for Preparing Refractory Concrete Specimens by Casting

    C863-00(2016) Standard Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures

    C865-17 Standard Practice for Firing Refractory Concrete Specimens

    C874-11a Standard Test Method for Rotary Slag Testing of Refractory Materials

    C885-87(2012) Standard Test Method for Young's Modulus of Refractory Shapes by Sonic Resonance

    C899-79(2018) Standard Practice for Use of Metric Units of Measure for Reporting Properties of Refractory Materials

    C903-15e1 Standard Practice for Preparing Refractory Specimens by Cold Gunning

    C909-18 Standard Practice for Dimensions of a Modular Series of Refractory Brick and Shapes

    C914-09(2015) Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion

    C973-87(2015) Standard Practice for Preparing Test Specimens From Basic Refractory Gunning Products by Pressing

    C974-87(2015) Standard Practice for Preparing Test Specimens from Basic Refractory Castable Products by Casting

    C975-87(2015) Standard Practice for Preparing Test Specimens from Basic Refractory Ramming Products by Pressing

    C987-10(2015) Standard Test Method for Vapor Attack on Refractories for Furnace Superstructures

    C1054-18 Standard Practice for Pressing and Drying Refractory Plastic and Ramming Mix Specimens

    C1070-01(2014) Standard Test Method for Determining Particle Size Distribution of Alumina or Quartz by Laser Light Scattering

    C1099-07(2019) Standard Test Method for Modulus of Rupture of Carbon-Containing Refractory Materials at Elevated Temperatures

    C1113/C1113M-09(2019) Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)

    C1145-19 Standard Terminology of Advanced Ceramics

    C1161-18 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature

    C1171-16 Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories

    C1190-18 Standard Practice for Location of Test Specimens from Magnesia-Carbon and Impregnated Burned Basic Brick

    C1198-09(2013) Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Sonic Resonance

    C1211-18 Standard Test Method for Flexural Strength of Advanced Ceramics at Elevated Temperatures

    C1223-19 Standard Test Method for Testing of Glass Exudation from AZS Fusion-Cast Refractories

    C1239-13(2018) Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics

    C1259-15 Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration

    C1273-18 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures

    C1274-12 Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption

    C1275-18 Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature

    C1291-18 Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time to Failure for Monolithic Advanced Ceramics

    C1292-16 Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures

    C1322-15(2019) Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics

    C1323-16 Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature

    C1326-13(2018) Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics

    C1327-15(2019) Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics

    C1337-17 Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures

    C1341-13(2018) Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites

    C1358-18 Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross Section Test Specimens at Ambient Temperatures

    C1359-18e1 Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross Section Test Specimens at Elevated Temperatures

    C1360-17 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures

    C1361-10(2019) Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures

    C1366-04(2013) Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures

    C1368-18 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Rate Strength Testing at Ambient Temperature

    C1407-98(2016) Standard Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes

    C1419-14 Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young’s Modulus

    C1421-18 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature

    C1424-15(2019) Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature

    C1425-19 Standard Test Method for Interlaminar Shear Strength of 1D and 2D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures

    C1445-13(2018) Standard Test Method for Measuring Consistency of Castable Refractory Using a Flow Table

    C1446-11 Standard Test Method for Measuring Consistency of Self-Flowing Castable Refractories

    C1465-08(2019) Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures

    C1468-19a Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature

    C1469-10(2015) Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature

    C1470-06(2013) Standard Guide for Testing the Thermal Properties of Advanced Ceramics

    C1494-13(2018) Standard Test Methods for Determination of Mass Fraction of Carbon, Nitrogen, and Oxygen in Silicon Nitride Powder

    C1495-16 Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics

    C1499-19 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature

    C1525-18 Standard Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching

    C1547-02(2018) Standard Classification for Fusion-Cast Refractory Blocks and Shapes

    C1548-02(2012) Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio of Refractory Materials by Impulse Excitation of Vibration

    C1557-14 Standard Test Method for Tensile Strength and Young’s Modulus of Fibers

    C1576-05(2017) Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Ambient Temperature

    C1624-05(2015) Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing

    C1655-06(2016) Standard Classification of Fireclay and High-Alumina Mortars

    C1656-13(2018) Standard Guide for Measuring the Reactivity of Hydraulic Refractory Castables Using Exothermic Profile

    C1674-16 Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures

    C1678-10(2015) Standard Practice for Fractographic Analysis of Fracture Mirror Sizes in Ceramics and Glasses

    C1683-10(2019) Standard Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics

    C1684-18 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature—Cylindrical Rod Strength

    C1730-17 Standard Test Method for Particle Size Distribution of Advanced Ceramics by X-Ray Monitoring of Gravity Sedimentation

    C1773-17 Standard Test Method for Monotonic Axial Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature

    C1783-15 Standard Guide for Development of Specifications for Fiber Reinforced Carbon-Carbon Composite Structures for Nuclear Applications

    C1793-15 Standard Guide for Development of Specifications for Fiber Reinforced Silicon Carbide-Silicon Carbide Composite Structures for Nuclear Applications

    C1819-15 Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Elastomeric Inserts

    C1834-16 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Elevated Temperatures

    C1835-16 Standard Classification for Fiber Reinforced Silicon Carbide-Silicon Carbide (SiC-SiC) Composite Structures

    C1836-16 Standard Classification for Fiber Reinforced Carbon-Carbon Composite Structures

    C1862-17 Standard Test Method for the Nominal Joint Strength of End-Plug Joints in Advanced Ceramic Tubes at Ambient and Elevated Temperatures

    C1863-18 Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Direct Pressurization

    C1869-18 Standard Test Method for Open-Hole Tensile Strength of Fiber-Reinforced Advanced Ceramic Composites

    D2652-11 Standard Terminology Relating to Activated Carbon

    D2854-09(2014) Standard Test Method for Apparent Density of Activated Carbon

    D2862-16 Standard Test Method for Particle Size Distribution of Granular Activated Carbon

    D2866-11(2018) Standard Test Method for Total Ash Content of Activated Carbon

    D2867-17 Standard Test Methods for Moisture in Activated Carbon

    D3466-06(2018) Standard Test Method for Ignition Temperature of Granular Activated Carbon

    D3467-04(2014) Standard Test Method for Carbon Tetrachloride Activity of Activated Carbon

    D3802-16 Standard Test Method for Ball-Pan Hardness of Activated Carbon

    D3803-91(2014) Standard Test Method for Nuclear-Grade Activated Carbon

    D3838-05(2017) Standard Test Method for pH of Activated Carbon

    D3860-98(2014) Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique

    D4069-95(2014) Standard Specification for Impregnated Activated Carbon Used to Remove Gaseous Radio-Iodines from Gas Streams

    D4607-14 Standard Test Method for Determination of Iodine Number of Activated Carbon

    D5029-98(2014) Standard Test Method for Water Solubles in Activated Carbon

    D5158-98(2019) Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air-Jet Sieving

    D5159-04(2014) Standard Guide for Dusting Attrition of Granular Activated Carbon

    D5160-95(2014) Standard Guide for Gas-Phase Adsorption Testing of Activated Carbon

    D5228-16 Standard Test Method for Determination of Butane Working Capacity of Activated Carbon

    D5742-16 Standard Test Method for Determination of Butane Activity of Activated Carbon

    D5832-98(2014) Standard Test Method for Volatile Matter Content of Activated Carbon Samples

    D5919-96(2017) Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations

    D6385-99(2017) Standard Test Method for Determining Acid-Extractable Content in Activated Carbon by Ashing

    D6586-03(2014) Standard Practice for the Prediction of Contaminant Adsorption On GAC In Aqueous Systems Using Rapid Small-Scale Column Tests

    D6646-03(2014) Standard Test Method for Determination of the Accelerated Hydrogen Sulfide Breakthrough Capacity of Granular and Pelletized Activated Carbon

    D6647-18 Standard Test Method for Determination of Acid Soluble Iron via Atomic Absorption

    D6781-02(2014) Standard Guide for Carbon Reactivation

    D6851-02(2011) Standard Test Method for Determination of Contact pH with Activated Carbon

    D7385-13 Standard Guide for Estimating Carbon Saturation by Temperature Rise upon Immersion

    D8176-18 Standard Test Method for Mechanically Tapped Density of Activated Carbon (Powdered and Fine Mesh)

    More Information


    Print or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2019
       Standards: 160
       Pages: 1298

    - 2018
       Standards: 158
       Pages: 1266