ASTM Volume 08.02, June 2019

    Plastics (II): D3222–D5083

    Table of Contents

    D3222-18a Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials

    D3275-18 Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials

    D3291-11(2016)e1 Standard Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression

    D3294-15 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded Basic Shapes

    D3295-15 Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing

    D3296-14a(2019) Standard Specification for FEP-Fluorocarbon Tube

    D3307-16 Standard Specification for Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials

    D3308-12(2017) Standard Specification for PTFE Resin Skived Tape

    D3350-14 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials

    D3354-15 Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method

    D3364-99(2019) Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications

    D3367-13 Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force

    D3368-17 Standard Specification for FEP Sheet and Film

    D3418-15 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry

    D3419-12(2019) Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds

    D3420-14 Standard Test Method for Pendulum Impact Resistance of Plastic Film

    D3453-12 Standard Specification for Flexible Cellular Materials—Urethane for Furniture and Automotive Cushioning, Bedding, and Similar Applications

    D3465-14 Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography

    D3489-17 Standard Test Methods for Microcellular Urethane Materials

    D3574-17 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams

    D3575-14 Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers

    D3576-15 Standard Test Method for Cell Size of Rigid Cellular Plastics

    D3591-17 Standard Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated Compounds

    D3595-14(2019)e1 Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film

    D3596-19 Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins

    D3641-15 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials

    D3647-16 Standard Practice for Classifying Reinforced Plastic Pultruded Shapes According to Composition

    D3675-19 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source

    D3676-18 Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay

    D3748-14(2019) Standard Practice for Evaluating High-Density Rigid Cellular Plastics

    D3749-19 Standard Test Method for Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins by Gas Chromatographic Headspace Technique

    D3763-18 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors

    D3768-16 Standard Test Method for Microcellular Urethanes—Flexural Recovery

    D3769-15 Standard Test Method for Microcellular Urethanes—High-Temperature Sag

    D3795-00a(2012) Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer

    D3801-19 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position

    D3826-18 Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test

    D3835-16 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer

    D3846-08(2015) Standard Test Method for In-Plane Shear Strength of Reinforced Plastics

    D3851-17 Standard Specification for Microcellular Polyurethane Shoe Soling Materials

    D3895-19 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry

    D3914-02(2016) Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod

    D3916-08(2016) Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod

    D3917-15a Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes

    D3918-11 Standard Terminology Relating to Reinforced Plastic Pultruded Products

    D3935-15 Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material

    D3965-16 Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings

    D3981-09a(2016) Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications

    D4001-13 Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering

    D4065-12 Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures

    D4066-13 Standard Classification System for Nylon Injection and Extrusion Materials (PA)

    D4067-16 Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods

    D4092-07(2013) Standard Terminology for Plastics: Dynamic Mechanical Properties

    D4093-95(2014) Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials

    D4101-17e1 Standard Classification System and Basis for Specification for Polypropylene Injection and Extrusion Materials

    D4203-17 Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials

    D4204-16 Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study

    D4216-17 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds

    D4218-15 Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace Technique

    D4272/D4272M-15 Standard Test Method for Total Energy Impact of Plastic Films by Dart Drop

    D4273-18 Standard Test Method for Polyurethane Raw Materials: Determination of Primary Hydroxyl Content of Polyether Polyols

    D4274-16 Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of Polyols

    D4275-17 Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and Ethylene–Vinyl Acetate (EVA) Copolymers by Gas Chromatography

    D4321-15 Standard Test Method for Package Yield of Plastic Film

    D4329-13 Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics

    D4349-16 Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials

    D4350-16 Standard Test Method for Corrosivity Index of Plastics and Fillers

    D4364-13 Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight

    D4385-13 Standard Practice for Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products

    D4396-15 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications

    D4397-16 Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications

    D4440-15 Standard Test Method for Plastics: Dynamic Mechanical Properties Melt Rheology

    D4441-15 Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene

    D4443-19 Standard Test Method for Determining Residual Vinyl Chloride Monomer Content in PPB Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography

    D4459-12 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications

    D4473-08(2016) Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior

    D4475-02(2016) Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method

    D4476/D4476M-14 Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods

    D4526-12 Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography

    D4549-15 Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)

    D4591-17 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry

    D4603-18 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer

    D4634-16 Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)

    D4635-16 Standard Specification for Plastic Films Made from Low-Density Polyethylene and Linear Low-Density Polyethylene for General Use and Packaging Applications

    D4660-18 Standard Test Methods for Polyurethane Raw Materials: Determination of the Isomer Content of Toluenediisocyanate

    D4661-18 Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine in Isocyanates

    D4662-15 Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols

    D4663-15 Standard Test Method for Polyurethane Raw Materials: Determination of Hydrolyzable Chlorine of Isocyanates

    D4669-18 Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols

    D4670-17 Standard Test Method for Polyurethane Raw Materials: Determination of Suspended Matter in Polyols

    D4671-16 Standard Test Method for Polyurethane Raw Materials: Determination of Unsaturation of Polyols

    D4672-18 Standard Test Method for Polyurethane Raw Materials: Determination of Water Content of Polyols

    D4673-16 Standard Classification System for and Basis for Specification for Acrylonitrile–Butadiene–Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials

    D4703-16 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets

    D4745-19 Standard Classification System and Basis for Specification for Filled Polytetrafluoroethlyene (PTFE) Molding and Extrusion Materials Using ASTM Methods

    D4801-08(2016) Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater

    D4802-16 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet

    D4804-19 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics

    D4812-11 Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics

    D4819-13 Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics

    D4875-18 Standard Test Methods of Polyurethane Raw Materials: Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols

    D4877-19 Standard Test Method for Polyurethane Raw Materials: Determination of APHA Color in Isocyanates

    D4878-15 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols

    D4883-18 Standard Test Method for Density of Polyethylene by the Ultrasound Technique

    D4889-15 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates

    D4894-19 Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials

    D4895-18 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion

    D4968-19a Standard Practice for Annual Review of Test Methods and Specifications for Plastics

    D4969-17 Standard Specification for Polytetrafluoroethylene–(PTFE) Coated Glass Fabric

    D4976-12a Standard Specification for Polyethylene Plastics Molding and Extrusion Materials

    D4986-18 Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials

    D5017-17 Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance

    D5023-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)

    D5024-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression

    D5025-12e1 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials

    D5026-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension

    D5028-17 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis

    D5045-14 Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials

    D5047-17 Standard Specification for Polyethylene Terephthalate Film and Sheeting

    D5048-18 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame

    D5071-06(2013) Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus

    D5083-17 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens

    More Information


    Print or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2019
       Standards: 129
       Pages: 934

    - 2019
       Standards: 129
       Pages: 934