ASTM Volume 04.08, March 2019

    Soil and Rock (I): D420 – D5876

    Table of Contents

    D420-18 Standard Guide for Site Characterization for Engineering Design and Construction Purposes

    D425-17 Standard Test Method for Centrifuge Moisture Equivalent of Soils

    D558-11 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures

    D559/D559M-15 Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures

    D560/D560M-16 Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures

    D653-14 Standard Terminology Relating to Soil, Rock, and Contained Fluids

    D698-12e2 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))

    D806-11 Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures

    D854-14 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer

    D1140-17 Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing

    D1143/D1143M-07(2013)e1 Standard Test Methods for Deep Foundations Under Static Axial Compressive Load

    D1241-15 Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses

    D1452/D1452M-16 Standard Practice for Soil Exploration and Sampling by Auger Borings

    D1556/D1556M-15e1 Standard Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method

    D1557-12e1 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))

    D1586/D1586M-18 Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils

    D1587/D1587M-15 Standard Practice for Thin-Walled Tube Sampling of Fine-Grained Soils for Geotechnical Purposes

    D1632-17 Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory

    D1633-17 Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders

    D1634-17 Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)

    D1635/D1635M-12 Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading

    D1883-16 Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils

    D1997-13 Standard Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry Mass

    D2113-14 Standard Practice for Rock Core Drilling and Sampling of Rock for Site Exploration

    D2166/D2166M-16 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil

    D2167-15 Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method

    D2168-10(2018) Standard Practices for Calibration of Laboratory Mechanical-Rammer Soil Compactors

    D2216-19 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass

    D2435/D2435M-11 Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading

    D2487-17 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)

    D2488-17e1 Standard Practice for Description and Identification of Soils (Visual-Manual Procedures)

    D2573/D2573M-18 Standard Test Method for Field Vane Shear Test in Saturated Fine-Grained Soils

    D2844/D2844M-18 Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils

    D2850-15 Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils

    D2937-17e2 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method

    D2944-14 Standard Practice of Sampling Processed Peat Materials

    D2973-16 Standard Test Method for Total Nitrogen in Peat Materials

    D2974-14 Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils

    D2976-15 Standard Test Method for pH of Peat Materials

    D2977-14 Standard Practice for Particle Size Range of Peat Materials for Horticultural Purposes

    D2978-15e1 Standard Test Methods for Volume of Processed Peat Materials

    D2980-17e1 Standard Test Method for Saturated Density, Moisture-Holding Capacity, and Porosity of Saturated Peat Materials

    D3080/D3080M-11 Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions

    D3155-11 Standard Test Method for Lime Content of Uncured Soil-Lime Mixtures

    D3213-19 Standard Practices for Handling, Storing, and Preparing Soft Intact Marine Soil

    D3282-15 Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes

    D3385-18 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer

    D3404-15 Standard Guide for Measuring Matric Potential in Vadose Zone Using Tensiometers

    D3441-16 Standard Test Method for Mechanical Cone Penetration Testing of Soils

    D3550/D3550M-17 Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils

    D3551-17 Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using Mechanical Mixer

    D3689/D3689M-07(2013)e1 Standard Test Methods for Deep Foundations Under Static Axial Tensile Load

    D3740-12a Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction

    D3966/D3966M-07(2013)e1 Standard Test Methods for Deep Foundations Under Lateral Load

    D3967-16 Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens

    D3999/D3999M-11e1 Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus

    D4015-15e1 Standard Test Methods for Modulus and Damping of Soils by Fixed-Base Resonant Column Devices

    D4016-14 Standard Test Method for Viscosity and Gel Time of Chemical Grouts by Rotational Viscometer (Laboratory Method)

    D4043-17 Standard Guide for Selection of Aquifer Test Method in Determining Hydraulic Properties by Well Techniques

    D4044/D4044M-15 Standard Test Method for (Field Procedure) for Instantaneous Change in Head (Slug) Tests for Determining Hydraulic Properties of Aquifers

    D4050-14 Standard Test Method for (Field Procedure) for Withdrawal and Injection Well Testing for Determining Hydraulic Properties of Aquifer Systems

    D4083-89(2016) Standard Practice for Description of Frozen Soils (Visual-Manual Procedure)

    D4104-17 Standard Test Method (Analytical Procedure) for Determining Transmissivity of Nonleaky Confined Aquifers by Overdamped Well Response to Instantaneous Change in Head (Slug Tests)

    D4105/D4105M-15e1 Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Modified Theis Nonequilibrium Method

    D4106-15 Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Theis Nonequilibrium Method

    D4186/D4186M-12e1 Standard Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils Using Controlled-Strain Loading

    D4220/D4220M-14 Standard Practices for Preserving and Transporting Soil Samples

    D4221-18 Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer

    D4223/D4223M-12 Standard Practice for Preparation of Test Specimens of Asphalt-Stabilized Soils

    D4253-16 Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table

    D4254-16 Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density

    D4318-17e1 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils

    D4373-14 Standard Test Method for Rapid Determination of Carbonate Content of Soils

    D4380-12 Standard Test Method for Density of Bentonitic Slurries

    D4381/D4381M-12 Standard Test Method for Sand Content by Volume of Bentonitic Slurries

    D4394-17 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Rigid Plate Loading Method

    D4395-17 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Flexible Plate Loading Method

    D4403-12 Standard Practice for Extensometers Used in Rock

    D4404-18 Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry

    D4427-18 Standard Classification of Peat Samples by Laboratory Testing

    D4428/D4428M-14 Standard Test Methods for Crosshole Seismic Testing

    D4435-13e1 Standard Test Method for Rock Bolt Anchor Pull Test

    D4436-13e1 Standard Test Method for Rock Bolt Long-Term Load Retention Test

    D4452-14 Standard Practice for X-Ray Radiography of Soil Samples

    D4506-13e1 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Radial Jacking Test

    D4511-11 Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat

    D4525-13e2 Standard Test Method for Permeability of Rocks by Flowing Air

    D4531-15 Standard Test Methods for Bulk and Dry Density of Peat and Peat Products

    D4535-13e2 Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer

    D4542-15 Standard Test Methods for Pore Water Extraction and Determination of the Soluble Salt Content of Soils by Refractometer

    D4544-19 Standard Practice for Estimating Peat Deposit Thickness

    D4546-14e1 Standard Test Methods for One-Dimensional Swell or Collapse of Soils

    D4553-18 Standard Test Method for Determining In Situ Creep Characteristics of Rock

    D4554-12 Standard Test Method for In Situ Determination of Direct Shear Strength of Rock Discontinuities

    D4611-16 Standard Test Method for Specific Heat of Rock and Soil

    D4612-16 Standard Test Method for Calculating Thermal Diffusivity of Rock and Soil

    D4623-16 Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method—Three Component Borehole Deformation Gauge

    D4630-19 Standard Test Method for Determining Transmissivity and Storage Coefficient of Low-Permeability Rocks by In Situ Measurements Using the Constant Head Injection Test

    D4631-18 Standard Test Method for Determining Transmissivity and Storativity of Low Permeability Rocks by In Situ Measurements Using Pressure Pulse Technique

    D4633-16 Standard Test Method for Energy Measurement for Dynamic Penetrometers

    D4643-17 Standard Test Method for Determination of Water Content of Soil and Rock by Microwave Oven Heating

    D4644-16 Standard Test Method for Slake Durability of Shales and Other Similar Weak Rocks

    D4647/D4647M-13 Standard Test Methods for Identification and Classification of Dispersive Clay Soils by the Pinhole Test

    D4648/D4648M-16 Standard Test Methods for Laboratory Miniature Vane Shear Test for SaturatedFine-Grained Clayey Soil

    D4696-18 Standard Guide for Pore-Liquid Sampling from the Vadose Zone

    D4700-15 Standard Guide for Soil Sampling from the Vadose Zone

    D4718/D4718M-15 Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles

    D4753-15 Standard Guide for Evaluating, Selecting, and Specifying Balances and Standard Masses for Use in Soil, Rock, and Construction Materials Testing

    D4767-11 Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils

    D4829-11 Standard Test Method for Expansion Index of Soils

    D4832-16e1 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders

    D4914/D4914M-16 Standard Test Methods for Density of Soil and Rock in Place by the Sand Replacement Method in a Test Pit

    D4943-18 Standard Test Method for Shrinkage Factors of Cohesive Soils by the Water Submersion Method

    D4944-18 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester

    D4945-17 Standard Test Method for High-Strain Dynamic Testing of Deep Foundations

    D4959-16 Standard Test Method for Determination of Water Content of Soil By Direct Heating

    D4971-16 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Using Diametrically Loaded 76-mm (3-in.) Borehole Jack

    D4972-18 Standard Test Methods for pH of Soils

    D4992-14e1 Standard Practice for Evaluation of Rock to be Used for Erosion Control

    D5030/D5030M-13a Standard Test Methods for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit

    D5080-17 Standard Test Method for Rapid Determination of Percent Compaction

    D5084-16a Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter

    D5088-15a Standard Practice for Decontamination of Field Equipment Used at Waste Sites

    D5092/D5092M-16 Standard Practice for Design and Installation of Groundwater Monitoring Wells

    D5093-15e1 Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring

    D5121-15 Standard Practice for Preparation of Rock Slabs for Durability Testing

    D5126-16e1 Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in Vadose Zone

    D5143-06(2015)e1 Standard Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High Performance Liquid Chromatography

    D5195-14 Standard Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear Methods

    D5202/D5202M-16 Standard Test Method for Determining Triaxial Compression Creep Strength of Chemically Grouted Soils

    D5220-14 Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method

    D5239-12e1 Standard Practice for Characterizing Fly Ash for Use in Soil Stabilization

    D5240/D5240M-12(2013)e1 Standard Test Method for Evaluation of Durability of Rock for Erosion Control Using Sodium Sulfate or Magnesium Sulfate

    D5255-15 Standard Practice for Certification of Personnel Engaged in the Testing of Soil and Rock

    D5268-13 Standard Specification for Topsoil Used for Landscaping Purposes

    D5269-15 Standard Test Method for Determining Transmissivity of Nonleaky Confined Aquifers by the Theis Recovery Method

    D5270-96(2014) Standard Test Method for Determining Transmissivity and Storage Coefficient of Bounded, Nonleaky, Confined Aquifers

    D5298-16 Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper

    D5299/D5299M-18 Standard Guide for Decommissioning of Groundwater Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities

    D5311/D5311M-13 Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil

    D5312/D5312M-12(2013) Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Freezing and Thawing Conditions

    D5313/D5313M-12(2013) Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Wetting and Drying Conditions

    D5334-14 Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure

    D5335-14 Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges

    D5434-12 Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock

    D5435-13 Standard Test Method for Diagnostic Soil Test for Plant Growth and Food Chain Protection

    D5447-17 Standard Guide for Application of a Numerical Groundwater Flow Model to a Site-Specific Problem

    D5472/D5472M-14 Standard Test Method for Determining Specific Capacity and Estimating Transmissivity at the Control Well

    D5473/D5473M-15 Standard Test Method for (Analytical Procedure for) Analyzing the Effects of Partial Penetration of Control Well and Determining the Horizontal and Vertical Hydraulic Conductivity in a Nonleaky Confined Aquifer

    D5474-93(2012) Standard Guide for Selection of Data Elements for Groundwater Investigations

    D5490-93(2014)e1 Standard Guide for Comparing Groundwater Flow Model Simulations to Site-Specific Information

    D5519-15 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials

    D5520-18 Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression

    D5521/D5521M-18 Standard Guide for Development of Groundwater Monitoring Wells in Granular Aquifers

    D5539-14 Standard Specification for Seed Starter Mix

    D5550-14 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer

    D5607-16 Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force

    D5608-16 Standard Practices for Decontamination of Sampling and Non Sample Contacting Equipment Used at Low Level Radioactive Waste Sites

    D5609-16 Standard Guide for Defining Boundary Conditions in Groundwater Flow Modeling

    D5610-94(2014) Standard Guide for Defining Initial Conditions in Groundwater Flow Modeling

    D5611-94(2016) Standard Guide for Conducting a Sensitivity Analysis for a Groundwater Flow Model Application

    D5715-14 Standard Practice for Estimating the Degree of Humification of Peat and Other Organic Soils (Visual/Manual Method)

    D5716/D5716M-15 Standard Test Method for Measuring the Rate of Well Discharge by Circular Orifice Weir

    D5718-13 Standard Guide for Documenting a Groundwater Flow Model Application

    D5719-13 Standard Guide for Simulation of Subsurface Airflow Using Groundwater Flow Modeling Codes

    D5731-16 Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications

    D5737/D5737M-14 Standard Guide for Methods for Measuring Well Discharge

    D5745-15 Standard Guide for Developing and Implementing Short-Term Measures or Early Actions for Site Remediation

    D5753-18 Standard Guide for Planning and Conducting Geotechnical Borehole Geophysical Logging

    D5777-18 Standard Guide for Using the Seismic Refraction Method for Subsurface Investigation

    D5778-12 Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils

    D5779/D5779M-14 Standard Test Method for Field Determination of Rapid Specific Gravity of Rock and Manmade Materials for Erosion Control

    D5780-18 Standard Test Methods for Individual Piles in Permafrost Under Static Axial Compressive Load

    D5781/D5781M-18 Standard Guide for Use of Dual-Wall Reverse-Circulation Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water Quality Monitoring Devices

    D5782-18 Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices

    D5783-18 Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices

    D5784/D5784M-18 Standard Guide for Use of Hollow-Stem Augers for Geoenvironmental Exploration and the Installation of Subsurface Water Quality Monitoring Devices

    D5785/D5785M-15 Standard Test Method for (Analytical Procedure) for Determining Transmissivity of Confined Nonleaky Aquifers by Underdamped Well Response to Instantaneous Change in Head (Slug Test)

    D5786-17 Standard Practice for (Field Procedure) for Constant Drawdown Tests in Flowing Wells for Determining Hydraulic Properties of Aquifer Systems

    D5787-14 Standard Practice for Monitoring Well Protection

    D5850-18 Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells

    D5855/D5855M-15 Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in Flowing Well

    D5856-15 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter

    D5872/D5872M-18 Standard Guide for Use of Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water Quality Monitoring Devices

    D5873-14 Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method

    D5874-16 Standard Test Methods for Determination of the Impact Value (IV) of a Soil

    D5875/D5875M-18 Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water Quality Monitoring Devices

    D5876/D5876M-17 Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices

    More Information


    Print or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2019
       Standards: 193
       Pages: 1674

    - 2018
       Standards: 190
       Pages: 1658