ASTM Volume 05.02, March 2018

    Petroleum Products, Liquid Fuels, and Lubricants (II): D3711–D6122

    Table of Contents

    D3712-05(2017) Standard Test Method of Analysis of Oil-Soluble Petroleum Sulfonates by Liquid Chromatography

    D3764-15e1 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems

    D3827-92(2012) Standard Test Method for Estimation of Solubility of Gases in Petroleum and Other Organic Liquids

    D3828-16a Standard Test Methods for Flash Point by Small Scale Closed Cup Tester

    D3829-17 Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil

    D3831-12(2017) Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy

    D3944-12(2017) Standard Test Method for Solidification Point of Petroleum Wax

    D3948-14 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer

    D4006-16e1 Standard Test Method for Water in Crude Oil by Distillation

    D4007-11(2016)e1 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)

    D4042-93(2014) Standard Test Method for Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of Rolling Oils

    D4045-15 Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry

    D4046-14 Standard Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry

    D4047-13 Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method

    D4048-16e1 Standard Test Method for Detection of Copper Corrosion from Lubricating Grease

    D4049-16 Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray

    D4051-10(2015) Standard Practice for Preparation of Low-Pressure Gas Blends

    D4052-16 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter

    D4054-16 Standard Practice for Qualification and Approval of New Aviation Turbine Fuels and Fuel Additives

    D4055-04(2013) Standard Test Method for Pentane Insolubles by Membrane Filtration

    D4056-16 Standard Test Method for Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants

    D4057-12 Standard Practice for Manual Sampling of Petroleum and Petroleum Products

    D4072-98(2013) Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch

    D4170-16 Standard Test Method for Fretting Wear Protection by Lubricating Greases

    D4171-16a Standard Specification for Fuel System Icing Inhibitors

    D4172-94(2016) Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method)

    D4174-17 Standard Practice for Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems

    D4175-17ae1 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants

    D4176-04(2014) Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)

    D4177-16e1 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products

    D4178-82(2017) Standard Practice for Calibrating Moisture Analyzers

    D4289-13(2014)e1 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids

    D4290-15 Standard Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions

    D4291-04(2017) Standard Test Method for Trace Ethylene Glycol in Used Engine Oil

    D4292-17 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke

    D4293-15 Standard Specification for Phosphate Ester Based Fluids for Turbine Lubrication and Steam Turbine Electro-Hydraulic Control (EHC) Applications

    D4294-16e1 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry

    D4296-83(2015)e1 Standard Practice for Sampling Pitch

    D4304-17 Standard Specification for Mineral and Synthetic Lubricating Oil Used in Steam or Gas Turbines

    D4306-15 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination

    D4307-17 Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards

    D4308-13 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter

    D4310-10(2015) Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils

    D4312-15 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)

    D4377-00(2011) Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration

    D4378-13 Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines

    D4418-17 Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines

    D4419-90(2015) Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)

    D4422-13 Standard Test Method for Ash in Analysis of Petroleum Coke

    D4423-10(2015) Standard Test Method for Determination of Carbonyls in C4 Hydrocarbons

    D4424-09(2014) Standard Test Method for Butylene Analysis by Gas Chromatography

    D4425-09(2014) Standard Test Method for Oil Separation from Lubricating Grease by Centrifuging (Koppers Method)

    D4485-16 Standard Specification for Performance of Active API Service Category Engine Oils

    D4486-10 Standard Test Method for Kinematic Viscosity of Volatile and Reactive Liquids

    D4529-17 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

    D4530-15 Standard Test Method for Determination of Carbon Residue (Micro Method)

    D4539-17 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)

    D4616-95(2013) Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch

    D4625-16 Standard Test Method for Middle Distillate Fuel Storage Stability at 43 °C (110 °F)

    D4626-95(2015) Standard Practice for Calculation of Gas Chromatographic Response Factors

    D4627-12(2017) Standard Test Method for Iron Chip Corrosion for Water–Miscible Metalworking Fluids

    D4628-16 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry

    D4629-12(2017) Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection

    D4636-17 Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils

    D4682-13 Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants

    D4683-17 Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 °C

    D4684-17a Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature

    D4693-07(2017) Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings

    D4715-98(2017) Standard Test Method for Coking Value of Tar and Pitch (Alcan)

    D4737-10(2016) Standard Test Method for Calculated Cetane Index by Four Variable Equation

    D4739-11(2017) Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration

    D4740-04(2014) Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test

    D4741-17 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer

    D4742-17 Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)

    D4746-14e1 Standard Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration

    D4806-17 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel

    D4807-05(2015) Standard Test Method for Sediment in Crude Oil by Membrane Filtration

    D4808-17 Standard Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy

    D4809-13 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)

    D4814-17 Standard Specification for Automotive Spark-Ignition Engine Fuel

    D4815-15b Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography

    D4857-12 Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards

    D4858-13 Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines

    D4859-13 Standard Specification for Lubricants for Two-Stroke-Cycle Spark-Ignition Gasoline Engines-TC

    D4860-14 Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating)

    D4863-13 Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants

    D4865-09(2014) Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems

    D4868-17 Standard Test Method for Estimation of Net and Gross Heat of Combustion of Hydrocarbon Burner and Diesel Fuels

    D4870-09(2014) Standard Test Method for Determination of Total Sediment in Residual Fuels

    D4871-11(2016) Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus

    D4892-14 Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)

    D4893-94(2015)e1 Standard Test Method for Determination of Pitch Volatility

    D4898-16 Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis

    D4927-15 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy

    D4928-12 Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration

    D4929-17 Standard Test Method for Determination of Organic Chloride Content in Crude Oil

    D4930-06(2017) Standard Test Method for Dust Control Material on Calcined Petroleum Coke

    D4931-06(2017) Standard Test Method for Gross Moisture in Green Petroleum Coke

    D4950-14 Standard Classification and Specification for Automotive Service Greases

    D4951-14 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry

    D4952-12(2017) Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)

    D4953-15 Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)

    D4998-13 Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids

    D5001-10(2014) Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)

    D5002-16 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer

    D5003-06a(2017) Standard Test Method for Hardgrove Grindability Index (HGI) of Petroleum Coke

    D5004-11(2017) Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement

    D5006-11(2016) Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels

    D5018-89(2015)e1 Standard Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches

    D5056-17 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption

    D5059-14 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy

    D5133-15 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique

    D5134-13(2017) Standard Test Method for Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography

    D5182-97(2014) Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)

    D5183-05(2016) Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine

    D5184-12(2017) Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry

    D5185-13e1 Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

    D5186-15 Standard Test Method for Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels By Supercritical Fluid Chromatography

    D5187-10(2015)e1 Standard Test Method for Determination of Crystallite Size (Lc) of Calcined Petroleum Coke by X-Ray Diffraction

    D5188-16 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber and Piston Based Method)

    D5191-15 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)

    D5234-92(2017) Standard Guide for Analysis of Ethylene Product

    D5236-17 Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method)

    D5273-92(2012) Standard Guide for Analysis of Propylene Concentrates

    D5274-00(2014) Standard Guide for Analysis of 1,3–Butadiene Product

    D5275-17 Standard Test Method for Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids

    D5291-16 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants

    D5292-99(2014) Standard Test Method for Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy

    D5293-17a Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between –10 °C and –35 °C Using Cold-Cranking Simulator

    D5303-92(2012) Standard Test Method for Trace Carbonyl Sulfide in Propylene by Gas Chromatography

    D5304-15 Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure

    D5305-12 Standard Test Method for Determination of Ethyl Mercaptan in LP-Gas Vapor

    D5306-92(2013) Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids

    D5372-17 Standard Guide for Evaluation of Hydrocarbon Heat Transfer Fluids

    D5384-14 Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)

    D5441-98(2017) Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography

    D5442-17 Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography

    D5443-14 Standard Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200 °C by Multi-Dimensional Gas Chromatography

    D5452-12 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration

    D5453-16e1 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence

    D5481-13 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer

    D5482-07(2013) Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method—Atmospheric)

    D5483-05(2015) Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry

    D5500-16 Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation

    D5501-12(2016) Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography

    D5502-00(2015) Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry

    D5534-94(2011)e1 Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids

    D5579-16 Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test

    D5580-15 Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography

    D5598-01(2012) Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling

    D5599-17 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection

    D5600-17 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

    D5621-07(2013) Standard Test Method for Sonic Shear Stability of Hydraulic Fluids

    D5622-17 Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis

    D5623-94(2014) Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection

    D5662-17a Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers

    D5704-17 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles

    D5705-15 Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils

    D5706-16 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

    D5707-16 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

    D5708-15 Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry

    D5709-09(2015) Standard Test Method for Sieve Analysis of Petroleum Coke

    D5760-13 Standard Specification for Performance of Manual Transmission Gear Lubricants

    D5761-96(2017) Standard Practice for Emulsification/Suspension of Multiphase Fluid Waste Materials

    D5762-17 Standard Test Method for Nitrogen in Liquid Hydrocarbons, Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence

    D5763-11(2016) Standard Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware

    D5769-15 Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry

    D5770-11(2017) Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing

    D5771-17 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Optical Detection Stepped Cooling Method)

    D5772-17 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Linear Cooling Rate Method)

    D5773-17e1 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Constant Cooling Rate Method)

    D5797-17 Standard Specification for Methanol Fuel Blends (M51–M85) for Methanol-Capable Automotive Spark-Ignition Engines

    D5798-17 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines

    D5799-95(2014) Standard Test Method for Determination of Peroxides in Butadiene

    D5800-15a Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method

    D5842-17 Standard Practice for Sampling and Handling of Fuels for Volatility Measurement

    D5845-01(2016) Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy

    D5846-07(2017) Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus

    D5853-17 Standard Test Method for Pour Point of Crude Oils

    D5854-96(2015) Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products

    D5863-00a(2016) Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry

    D5864-17 Standard Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components

    D5949-16 Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)

    D5950-14 Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)

    D5966-13 Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine

    D5967-17 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine

    D5968-17 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121 °C

    D5969-11(2016) Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments

    D5972-16 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)

    D5983-17 Standard Specification for Methyl Tertiary-Butyl Ether (MTBE) for Downstream Blending for Use in Automotive Spark-Ignition Engine Fuel

    D5984-11(2017) Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration

    D5985-02(2014) Standard Test Method for Pour Point of Petroleum Products (Rotational Method)

    D5986-96(2015) Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8–C 12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy

    D6006-17 Standard Guide for Assessing Biodegradability of Hydraulic Fluids

    D6021-12(2017) Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection

    D6022-06(2012) Standard Practice for Calculation of Permanent Shear Stability Index

    D6045-12(2017) Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method

    D6046-17 Standard Classification of Hydraulic Fluids for Environmental Impact

    D6074-15 Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils

    D6078-04(2016) Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE)

    D6079-11(2016) Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)

    D6080-12a Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids

    D6081-98(2014) Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation

    D6082-12(2017) Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils

    D6120-97(2017)e1 Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature

    D6121-17 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles

    D6122-15 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems

    More Information


    Print or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2018
       Standards: 207
       Pages: 1938

    - 2017
       Standards: 208
       Pages: 1936