ASTM Volume 04.06, November 2018

    Thermal Insulation; Building and Environmental Acoustics

    Table of Contents

    C163-05(2016) Standard Practice for Mixing Thermal Insulating Cement Samples

    C165-07(2017) Standard Test Method for Measuring Compressive Properties of Thermal Insulations

    C166-05(2016) Standard Test Method for Covering Capacity and Volume Change Upon Drying of Thermal Insulating Cement

    C167-15 Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations

    C168-18 Standard Terminology Relating to Thermal Insulation

    C177-13 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus

    C195-07(2013) Standard Specification for Mineral Fiber Thermal Insulating Cement

    C196-00(2016) Standard Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement

    C203-05a(2017) Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation

    C208-12(2017)e1 Standard Specification for Cellulosic Fiber Insulating Board

    C209-15 Standard Test Methods for Cellulosic Fiber Insulating Board

    C240-18 Standard Test Methods for Testing Cellular Glass Insulation Block

    C302-13(2017) Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation

    C303-10(2016)e1 Standard Test Method for Dimensions and Density of Preformed Block and Board–Type Thermal Insulation

    C335/C335M-17 Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation

    C356-17 Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat

    C367/C367M-16 Standard Test Methods for Strength Properties of Prefabricated Architectural Acoustical Tile or Lay-In Ceiling Panels

    C384-04(2016) Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method

    C390-08(2013) Standard Practice for Sampling and Acceptance of Thermal Insulation Lots

    C411-17 Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation

    C419-08(2013) Standard Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings

    C421-08(2014) Standard Test Method for Tumbling Friability of Preformed Block-Type and Preformed Pipe-Covering-Type Thermal Insulation

    C423-17 Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method

    C447-15 Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations

    C449-07(2013) Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement

    C450-18 Standard Practice for Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging

    C461-17 Standard Test Methods for Mastics and Coatings Used With Thermal Insulation

    C488-16 Standard Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation

    C516-08(2013)e1 Standard Specification for Vermiculite Loose Fill Thermal Insulation

    C518-17 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

    C520-15 Standard Test Methods for Density of Granular Loose Fill Insulations

    C522-03(2016) Standard Test Method for Airflow Resistance of Acoustical Materials

    C533-17 Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation

    C534/C534M-16 Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form

    C547-17 Standard Specification for Mineral Fiber Pipe Insulation

    C549-06(2012) Standard Specification for Perlite Loose Fill Insulation

    C550-15 Standard Test Method for Measuring Trueness and Squareness of Rigid Block and Board Thermal Insulation

    C552-17e1 Standard Specification for Cellular Glass Thermal Insulation

    C553-13 Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications

    C578-18 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation

    C585-10(2016) Standard Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing

    C591-17 Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation

    C592-16 Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)

    C610-17 Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation

    C612-14 Standard Specification for Mineral Fiber Block and Board Thermal Insulation

    C634-13e1 Standard Terminology Relating to Building and Environmental Acoustics

    C635/C635M-17 Standard Specification for Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings

    C636/C636M-13 Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels

    C647-08(2013) Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation

    C653-17 Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation

    C656-17 Standard Specification for Structural Insulating Board, Calcium Silicate

    C665-17 Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing

    C667-17 Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air

    C680-14 Standard Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical, and Spherical Systems by Use of Computer Programs

    C686-17 Standard Test Method for Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation

    C687-17 Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation

    C692-13 Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel

    C726-17 Standard Specification for Mineral Wool Roof Insulation Board

    C727-12 Standard Practice for Installation and Use of Reflective Insulation in Building Constructions

    C728-17a Standard Specification for Perlite Thermal Insulation Board

    C739-17 Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation

    C740/C740M-13 Standard Guide for Evacuated Reflective Insulation In Cryogenic Service

    C755-10(2015)e1 Standard Practice for Selection of Water Vapor Retarders for Thermal Insulation

    C764-17 Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation

    C795-08(2013) Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel

    C800-14 Standard Specification for Fibrous Glass Blanket Insulation (Aircraft Type)

    C835-06(2013)e1 Standard Test Method for Total Hemispherical Emittance of Surfaces up to 1400°C

    C846-16 Standard Practice for Application of Cellulosic Fiber Insulating Board for Wall Sheathing

    C870-11(2017) Standard Practice for Conditioning of Thermal Insulating Materials

    C871-18 Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions

    C892-18 Standard Specification for High-Temperature Fiber Blanket Thermal Insulation

    C916-14 Standard Specification for Adhesives for Duct Thermal Insulation

    C921-10(2015) Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation

    C929-14 Standard Practice for Handling, Transporting, Shipping, Storage, Receiving, and Application of Thermal Insulation Materials For Use in Contact with Austenitic Stainless Steel

    C930-18 Standard Classification of Potential Health and Safety Concerns Associated With Thermal Insulation Materials and Accessories

    C945-05(2017) Standard Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels

    C950/C950M-08(2017) Standard Practice for Repair of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels

    C991-16 Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings

    C1014-17 Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation

    C1015-17 Standard Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation

    C1029-15 Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation

    C1041-10 Standard Practice for In-Situ Measurements of Heat Flux in Industrial Thermal Insulation Using Heat Flux Transducers

    C1043-16 Standard Practice for Guarded-Hot-Plate Design Using Circular Line-Heat Sources

    C1044-16 Standard Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode

    C1045-07(2013) Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions

    C1046-95(2013) Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components

    C1055-03(2014) Standard Guide for Heated System Surface Conditions that Produce Contact Burn Injuries

    C1057-17 Standard Practice for Determination of Skin Contact Temperature from Heated Surfaces Using a Mathematical Model and Thermesthesiometer

    C1058/C1058M-10(2015) Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation

    C1060-11a(2015) Standard Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings

    C1071-16 Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)

    C1086-09(2016) Standard Specification for Glass Fiber Mechanically Bonded Felt Thermal Insulation

    C1101/C1101M-06(2017) Standard Test Methods for Classifying the Flexibility or Rigidity of Mineral Fiber Blanket and Board Insulation

    C1104/C1104M-13a Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation

    C1114-06(2013) Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus

    C1126-15 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation

    C1129-17 Standard Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges

    C1130-17 Standard Practice for Calibration of Thin Heat Flux Transducers

    C1134-17 Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion

    C1136-17a Standard Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation

    C1139-14 Standard Specification for Fibrous Glass Thermal Insulation and Sound Absorbing Blanket and Board for Military Applications

    C1146-09(2013) Standard Guide for Prefabricated Panel and H–bar Insulation Systems for Vessels, Ducts and Equipment Operating at Temperatures Above Ambient Air

    C1149-17 Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation

    C1153-10(2015) Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging

    C1155-95(2013) Standard Practice for Determining Thermal Resistance of Building Envelope Components from the In-Situ Data

    C1199-14 Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods

    C1224-15 Standard Specification for Reflective Insulation for Building Applications

    C1258-08(2013) Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation

    C1263-95(2015) Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders

    C1289-17 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board

    C1290-16 Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts

    C1303/C1303M-15 Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation

    C1304-08(2013) Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials

    C1313/C1313M-13 Standard Specification for Sheet Radiant Barriers for Building Construction Applications

    C1320-10(2016) Standard Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame Construction

    C1321-15 Standard Practice for Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building Construction

    C1335-12(2017) Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation

    C1338-14 Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings

    C1340/C1340M-10(2015) Standard Practice for Estimation of Heat Gain or Loss Through Ceilings Under Attics Containing Radiant Barriers by Use of a Computer Program

    C1363-11 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus

    C1371-15 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers

    C1373/C1373M-11(2017) Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions

    C1374-14 Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation

    C1393-14 Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks

    C1409-12 Standard Guide for Measuring and Estimating Quantities of Insulated Piping and Components

    C1410-17 Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation

    C1423-16 Standard Guide for Selecting Jacketing Materials for Thermal Insulation

    C1427-16 Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form

    C1482-17 Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation

    C1483/C1483M-17 Standard Specification for Exterior Solar Radiation Control Coatings on Buildings

    C1484-10 Standard Specification for Vacuum Insulation Panels

    C1485-13 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using an Electric Radiant Heat Energy Source

    C1497-16 Standard Specification for Cellulosic Fiber Stabilized Thermal Insulation

    C1498-04a(2016) Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials

    C1511-15 Standard Test Method for Determining the Water Retention (Repellency) Characteristics of Fibrous Glass Insulation (Aircraft Type)

    C1512-10(2015)e1 Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products

    C1534-18 Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems

    C1549-16 Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer

    C1558-16 Standard Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation

    C1559-15 Standard Test Method for Determining Wicking of Fibrous Glass Blanket Insulation (Aircraft Type)

    C1574-04(2013) Standard Guide for Determining Blown Density of Pneumatically Applied Loose-Fill Mineral Fiber Thermal Insulation

    C1594-11(2017) Standard Specification for Polyimide Rigid Cellular Thermal Insulation

    C1616-07(2018) Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight

    C1617-18 Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals

    C1630-11(2016) Standard Guide for Development of Coverage Charts for Loose-Fill Thermal Building Insulations

    C1639-17 Standard Specification for Fabrication Of Cellular Glass Pipe And Tubing Insulation

    C1667-15 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Transmission Properties of Vacuum Insulation Panels

    C1668-13a Standard Specification for Externally Applied Reflective Insulation Systems on Rigid Duct in Heating, Ventilation, and Air Conditioning (HVAC) Systems

    C1676/C1676M-14 Standard Specification for Microporous Thermal Insulation

    C1685-15 Standard Specification for Pneumatically Applied High-Temperature Fiber Thermal Insulation for Industrial Applications

    C1695-18 Standard Specification for Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot Service

    C1696-16 Standard Guide for Industrial Thermal Insulation Systems

    C1699-09(2015) Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates

    C1710-16 Standard Guide for Installation of Flexible Closed Cell Preformed Insulation in Tube and Sheet Form

    C1728-17 Standard Specification for Flexible Aerogel Insulation

    C1729-17 Standard Specification for Aluminum Jacketing for Insulation

    C1729M-17 Standard Specification for Aluminum Jacketing for Insulation

    C1743-12 Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Residential Building Construction

    C1744-12 Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Commercial/Industrial Building Construction

    C1763-16 Standard Test Method for Water Absorption by Immersion of Thermal Insulation Materials

    C1767-16a Standard Specification for Stainless Steel Jacketing for Insulation

    C1767M-16a Standard Specification for Stainless Steel Jacketing for Insulation

    C1774-13 Standard Guide for Thermal Performance Testing of Cryogenic Insulation Systems

    C1775-14 Standard Specification for Laminate Protective Jacket and Tape for Use over Thermal Insulation for Outdoor Applications

    C1784-14 Standard Test Method for Using a Heat Flow Meter Apparatus for Measuring Thermal Storage Properties of Phase Change Materials and Products

    C1785-17 Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing

    C1794-15 Standard Test Methods for Determination of the Water Absorption Coefficient by Partial Immersion

    C1809-16 Standard Practice for Preparation of Specimens and Reporting of Results for Permeance Testing of Pressure Sensitive Adhesive Sealed Joints in Insulation Vapor Retarders

    C1822-15 Standard Specification for Insulating Covers on Accessible Lavatory Piping

    C1848-17a Standard Practice for Installation of High-Pressure Spray Polyurethane Foam Insulation for the Building Enclosure

    C1859-17a Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation in Side Wall Applications

    C1864-17 Standard Test Method for Determination of Solar Reflectance of Directionally Reflective Material Using Portable Solar Reflectometer

    E90-09(2016) Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements

    E96/E96M-16 Standard Test Methods for Water Vapor Transmission of Materials

    E336-17a Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings

    E413-16 Classification for Rating Sound Insulation

    E477-13e1 Standard Test Method for Laboratory Measurements of Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers

    E492-09(2016)e1 Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine

    E557-12 Standard Guide for Architectural Design and Installation Practices for Sound Isolation between Spaces Separated by Operable Partitions

    E580/E580M-17 Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions

    E596-96(2016) Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures

    E756-05(2017) Standard Test Method for Measuring Vibration-Damping Properties of Materials

    E795-16 Standard Practices for Mounting Test Specimens During Sound Absorption Tests

    E966-18 Standard Guide for Field Measurements of Airborne Sound Attenuation of Building Facades and Facade Elements

    E989-06(2012) Standard Classification for Determination of Impact Insulation Class (IIC)

    E1007-16 Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures

    E1014-12 Standard Guide for Measurement of Outdoor A-Weighted Sound Levels

    E1042-02(2014) Standard Classification for Acoustically Absorptive Materials Applied by Trowel or Spray

    E1050-12 Standard Test Method for Impedance and Absorption of Acoustical Materials Using a Tube, Two Microphones and a Digital Frequency Analysis System

    E1110-06(2011) Standard Classification for Determination of Articulation Class

    E1111/E1111M-14 Standard Test Method for Measuring the Interzone Attenuation of Open Office Components

    E1123-86(2016) Standard Practices for Mounting Test Specimens for Sound Transmission Loss Testing of Naval and Marine Ship Bulkhead Treatment Materials

    E1124-10(2016) Standard Test Method for Field Measurement of Sound Power Level by the Two-Surface Method

    E1130-16 Standard Test Method for Objective Measurement of Speech Privacy in Open Plan Spaces Using Articulation Index

    E1179-13 Standard Specification for Sound Sources Used for Testing Open Office Components and Systems

    E1222-90(2016) Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems

    E1264-14 Standard Classification for Acoustical Ceiling Products

    E1265-04(2013) Standard Test Method for Measuring Insertion Loss of Pneumatic Exhaust Silencers

    E1289-08(2016) Standard Specification for Reference Specimen for Sound Transmission Loss

    E1332-16 Standard Classification for Rating Outdoor-Indoor Sound Attenuation

    E1374-18e1 Standard Guide for Office Acoustics and Applicable ASTM Standards

    E1414/E1414M-16 Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum

    E1503-14 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System

    E1573-18 Standard Test Method for Measurement and Reporting of Masking Sound Levels Using A-Weighted and One-Third-Octave-Band Sound Pressure Levels

    E1574-98(2014) Standard Test Method for Measurement of Sound in Residential Spaces

    E1686-16 Standard Guide for Applying Environmental Noise Measurement Methods and Criteria

    E1704-95(2010) Standard Guide for Specifying Acoustical Performance of Sound-Isolating Enclosures

    E1780-12 Standard Guide for Measuring Outdoor Sound Received from a Nearby Fixed Source

    E2179-03(2016) Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors

    E2202-02(2016) Standard Practice for Measurement of Equipment-Generated Continuous Noise for Assessment of Health Hazards

    E2235-04(2012) Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods

    E2249-02(2016) Standard Test Method for Laboratory Measurement of Airborne Transmission Loss of Building Partitions and Elements Using Sound Intensity

    E2459-05(2016) Standard Guide for Measurement of In-Duct Sound Pressure Levels from Large Industrial Gas Turbines and Fans

    E2611-17 Standard Test Method for Normal Incidence Determination of Porous Material Acoustical Properties Based on the Transfer Matrix Method

    E2638-10(2017) Standard Test Method for Objective Measurement of the Speech Privacy Provided by a Closed Room

    E2963-16 Standard Test Method for Laboratory Measurement of Acoustical Effectiveness of Ship Noise Treatments Laboratory Measurement of Acoustical Effectiveness for Marine Bulkhead and Deck Treatments

    E2964-14e1 Standard Test Method for Measurement of the Normalized Insertion Loss of Doors

    E3090/E3090M-17 Standard Test Methods for Strength Properties of Metal Ceiling Suspension Systems

    E3091-17 Standard Specification for Systems to Measure Sound Levels

    E3133-18 Standard Test Method for Laboratory Measurement of Floor Impact Sound Radiation Using the Tapping Machine

    More Information


    Print or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2018
       Standards: 220
       Pages: 1632

    - 2017
       Standards: 220
       Pages: 1630