**Table of Contents**

E29-13 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

E105-16 Standard Practice for Probability Sampling of Materials

E122-17 Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process

E141-10 Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling

E177-14 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods

E178-16a Standard Practice for Dealing With Outlying Observations

E228-17 Standard Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer

E289-17 Standard Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry

E456-13ae4 Standard Terminology Relating to Quality and Statistics

E473-16 Standard Terminology Relating to Thermal Analysis and Rheology

E487-14 Standard Test Method for Constant-Temperature Stability of Chemical Materials

E502-07(2013) Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods

E537-12 Standard Test Method for The Thermal Stability of Chemicals by Differential Scanning Calorimetry

E582-07(2013)e1 Standard Test Method for Minimum Ignition Energy and Quenching Distance in Gaseous Mixtures

E659-15 Standard Test Method for Autoignition Temperature of Chemicals

E680-79(2011)e1 Standard Test Method for Drop Weight Impact Sensitivity of Solid-Phase Hazardous Materials

E681-09(2015) Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)

E691-16 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method

E698-16 Standard Test Method for Kinetic Parameters for Thermally Unstable Materials Using Differential Scanning Calorimetry and the Flynn/Wall/Ozawa Method

E793-06(2012) Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry

E794-06(2012) Standard Test Method for Melting And Crystallization Temperatures By Thermal Analysis

E831-14 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis

E918-83(2011) Standard Practice for Determining Limits of Flammability of Chemicals at Elevated Temperature and Pressure

E928-08(2014) Standard Test Method for Purity by Differential Scanning Calorimetry

E967-08(2014) Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers

E968-02(2014) Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters

E1131-08(2014) Standard Test Method for Compositional Analysis by Thermogravimetry

E1142-15 Standard Terminology Relating to Thermophysical Properties

E1169-14 Standard Practice for Conducting Ruggedness Tests

E1225-13 Standard Test Method for Thermal Conductivity of Solids Using the Guarded-Comparative-Longitudinal Heat Flow Technique

E1226-12a Standard Test Method for Explosibility of Dust Clouds

E1231-15 Standard Practice for Calculation of Hazard Potential Figures of Merit for Thermally Unstable Materials

E1232-07(2013) Standard Test Method for Temperature Limit of Flammability of Chemicals

E1269-11 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry

E1323-15 Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data

E1325-16 Standard Terminology Relating to Design of Experiments

E1356-08(2014) Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry

E1363-16 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers

E1402-13 Standard Guide for Sampling Design

E1445-08(2015) Standard Terminology Relating to Hazard Potential of Chemicals

E1461-13 Standard Test Method for Thermal Diffusivity by the Flash Method

E1488-12e1 Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods

E1491-06(2012) Standard Test Method for Minimum Autoignition Temperature of Dust Clouds

E1515-14 Standard Test Method for Minimum Explosible Concentration of Combustible Dusts

E1530-11(2016) Standard Test Method for Evaluating the Resistance to Thermal Transmission of Materials by the Guarded Heat Flow Meter Technique

E1545-11(2016) Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis

E1564-00(2014) Standard Guide for Design and Maintenance of Low-Temperature Storage Facilities for Maintaining Cryopreserved Biological Materials

E1565-00(2014) Standard Guide for Inventory Control and Handling of Biological Material Maintained at Low Temperatures

E1566-00(2014) Standard Guide for Handling Hazardous Biological Materials in Liquid Nitrogen

E1582-14 Standard Practice for Calibration of Temperature Scale for Thermogravimetry

E1640-13 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis

E1641-16 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method

E1719-12 Standard Test Method for Vapor Pressure of Liquids by Ebulliometry

E1782-14 Standard Test Method for Determining Vapor Pressure by Thermal Analysis

E1824-13 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method

E1858-08(2015)e1 Standard Test Methods for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry

E1860-13 Standard Test Method for Elapsed Time Calibration of Thermal Analyzers

E1867-16 Standard Test Methods for Temperature Calibration of Dynamic Mechanical Analyzers

E1868-10(2015) Standard Test Methods for Loss-On-Drying by Thermogravimetry

E1877-15 Standard Practice for Calculating Thermal Endurance of Materials from Thermogravimetric Decomposition Data

E1952-11 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry

E1953-14 Standard Practice for Description of Thermal Analysis and Rheology Apparatus

E1970-16 Standard Practice for Statistical Treatment of Thermoanalytical Data

E1981-98(2012)e2 Standard Guide for Assessing Thermal Stability of Materials by Methods of Accelerating Rate Calorimetry

E1994-09(2013) Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans

E2008-17 Standard Test Methods for Volatility Rate by Thermogravimetry

E2009-08(2014)e1 Standard Test Methods for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry

E2012-06(2012) Standard Guide for the Preparation of a Binary Chemical Compatibility Chart

E2019-03(2013) Standard Test Method for Minimum Ignition Energy of a Dust Cloud in Air

E2021-15 Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers

E2040-08(2014) Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers

E2041-13e1 Standard Test Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method

E2046-14 Standard Test Method for Reaction Induction Time by Thermal Analysis

E2069-06(2012) Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters

E2070-13 Standard Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods

E2071-00(2015) Standard Practice for Calculating Heat of Vaporization or Sublimation from Vapor Pressure Data

E2079-07(2013) Standard Test Methods for Limiting Oxygen (Oxidant) Concentration in Gases and Vapors

E2092-13 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis

E2097-00(2014) Standard Guide for Determining the Impact of Extractables from Non-Metallic Materials on the Safety of Biotechnology Products

E2113-13 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers

E2160-04(2012) Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry

E2161-15 Standard Terminology Relating to Performance Validation in Thermal Analysis and Rheology

E2206-11(2015) Standard Test Method for Force Calibration of Thermomechanical Analyzers

E2234-09(2013) Standard Practice for Sampling a Stream of Product by Attributes Indexed by AQL

E2253-16 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters

E2254-13 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers

E2281-15 Standard Practice for Process Capability and Performance Measurement

E2282-14 Standard Guide for Defining the Test Result of a Test Method

E2334-09(2013)e2 Standard Practice for Setting an Upper Confidence Bound For a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-conformities, Using Attribute Data, When There is a Zero Response in the Sample

E2347-16 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis

E2363-14 Standard Terminology Relating to Process Analytical Technology in the Pharmaceutical Industry

E2402-11 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers

E2403-06(2012) Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry

E2425-16 Standard Test Method for Loss Modulus Conformance of Dynamic Mechanical Analyzers

E2474-14 Standard Practice for Pharmaceutical Process Design Utilizing Process Analytical Technology

E2475-10(2016) Standard Guide for Process Understanding Related to Pharmaceutical Manufacture and Control

E2476-16 Standard Guide for Risk Assessment and Risk Control as it Impacts the Design, Development, and Operation of PAT Processes for Pharmaceutical Manufacture

E2489-16 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs

E2500-13 Standard Guide for Specification, Design, and Verification of Pharmaceutical and Biopharmaceutical Manufacturing Systems and Equipment

E2503-13e1 Standard Practice for Qualification of Basket and Paddle Dissolution Apparatus

E2509-14 Standard Test Method for Temperature Calibration of Rheometers in Isothermal Mode

E2510-07(2013) Standard Test Method for Torque Calibration or Conformance of Rheometers

E2537-16 Standard Guide for Application of Continuous Process Verification to Pharmaceutical and Biopharmaceutical Manufacturing

E2550-11 Standard Test Method for Thermal Stability by Thermogravimetry

E2551-13 Standard Test Method for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers

E2554-13 Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques

E2555-07(2012) Standard Practice for Factors and Procedures for Applying the MIL-STD-105 Plans in Life and Reliability Inspection

E2584-14 Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter

E2585-09(2015) Standard Practice for Thermal Diffusivity by the Flash Method

E2586-16 Standard Practice for Calculating and Using Basic Statistics

E2587-16 Standard Practice for Use of Control Charts in Statistical Process Control

E2602-09(2015) Standard Test Methods for the Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry

E2603-15 Standard Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters

E2629-11 Standard Guide for Verification of Process Analytical Technology (PAT) Enabled Control Systems

E2655-14 Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods

E2656-16 Standard Practice for Real-time Release Testing of Pharmaceutical Water for the Total Organic Carbon Attribute

E2696-09(2013) Standard Practice for Life and Reliability Testing Based on the Exponential Distribution

E2709-14e1 Standard Practice for Demonstrating Capability to Comply with an Acceptance Procedure

E2716-09(2014) Standard Test Method for Determining Specific Heat Capacity by Sinusoidal Modulated Temperature Differential Scanning Calorimetry

E2744-16 Standard Test Method for Pressure Calibration of Thermal Analyzers

E2762-10(2014) Standard Practice for Sampling a Stream of Product by Variables Indexed by AQL

E2769-16 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading

E2781-16 Standard Practice for Evaluation of Methods for Determination of Kinetic Parameters by Calorimetry and Differential Scanning Calorimetry

E2782-17 Standard Guide for Measurement Systems Analysis (MSA)

E2810-11e2 Standard Practice for Demonstrating Capability to Comply with the Test for Uniformity of Dosage Units

E2819-11(2015) Standard Practice for Single- and Multi-Level Continuous Sampling of a Stream of Product by Attributes Indexed by AQL

E2888-12 Standard Practice for Process for Inactivation of Rodent Retrovirus by pH

E2890-12e1 Standard Test Method for Kinetic Parameters for Thermally Unstable Materials by Differential Scanning Calorimetry Using the Kissinger Method

E2891-13 Standard Guide for Multivariate Data Analysis in Pharmaceutical Development and Manufacturing Applications

E2898-14 Standard Guide for Risk-Based Validation of Analytical Methods for PAT Applications

E2910-12 Standard Guide for Preferred Methods for Acceptance of Product

E2918-13 Standard Test Method for Performance Validation of Thermomechanical Analyzers

E2931-13 Standard Test Method for Limiting Oxygen (Oxidant) Concentration of Combustible Dust Clouds

E2935-16 Standard Practice for Conducting Equivalence Testing in Laboratory Applications

E2958-14 Standard Test Methods for Kinetic Parameters by Factor Jump/Modulated Thermogravimetry

E2968-14 Standard Guide for Application of Continuous Processing in the Pharmaceutical Industry

E2975-16e1 Standard Test Method for Calibration or Calibration Verification of Concentric Cylinder Rotational Viscometers

E3007-15 Standard Practice for Kinetic Values Used to Evaluate the Study of Decomposition Reactions by Thermogravimetry

E3042-16 Standard Practice for Process Step to Inactivate Rodent Retrovirus with Triton X-100 Treatment

E3051-16 Standard Guide for Specification, Design, Verification, and Application of Single-Use Systems in Pharmaceutical and Biopharmaceutical Manufacturing

E3060-16 Standard Guide for Subvisible Particle Measurement in Biopharmaceutical Manufacturing Using Dynamic (Flow) Imaging Microscopy

E3070-16 Standard Test Method for Shear Thinning Index on Non-Newtonian Liquids Using a Concentric Cylinder Rotational Viscometer

E3080-16 Standard Practice for Regression Analysis

F838-15a Standard Test Method for Determining Bacterial Retention of Membrane Filters Utilized for Liquid Filtration

**More Information**

Print or **NOW** get Online Access to this Volume

(Basic or Plus)

**View Contents**

- 2017

Standards: 142

Pages: 1302

- 2016

Standards: 152

Pages: 1224