ASTM Volume 04.03, June 2017

    Road and Paving Materials; Vehicle-Pavement Systems

    Table of Contents

    D5/D5M-13 Standard Test Method for Penetration of Bituminous Materials

    D8-17 Standard Terminology Relating to Materials for Roads and Pavements

    D20-03(2014) Standard Test Method for Distillation of Road Tars

    D70-09e1 Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method)

    D75/D75M-14 Standard Practice for Sampling Aggregates

    D98-15 Standard Specification for Calcium Chloride

    D139-16 Standard Test Method for Float Test for Bituminous Materials

    D140/D140M-16 Standard Practice for Sampling Asphalt Materials

    D242/D242M-09(2014) Standard Specification for Mineral Filler For Bituminous Paving Mixtures

    D243/D243M-14 Standard Test Method for Residue of Specified Penetration

    D244-09 Standard Test Methods and Practices for Emulsified Asphalts

    D345-02(2010) Standard Test Method for Sampling and Testing Calcium Chloride for Roads and Structural Applications

    D402/D402M-14 Standard Test Method for Distillation of Cutback Asphalt

    D448-12 Standard Classification for Sizes of Aggregate for Road and Bridge Construction

    D490-92(2016) Standard Specification for Road Tar

    D517-98(2015) Standard Specification for Asphalt Plank

    D545-14 Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)

    D546-10 Standard Test Method for Sieve Analysis of Mineral Filler for Bituminous Paving Mixtures

    D632-12 Standard Specification for Sodium Chloride

    D633-11(2016) Standard Volume Correction Table for Road Tar

    D692/D692M-15 Standard Specification for Coarse Aggregate for Bituminous Paving Mixtures

    D946/D946M-15 Standard Specification for Penetration-Graded Asphalt Binder for Use in Pavement Construction

    D977-13e1 Standard Specification for Emulsified Asphalt

    D979/D979M-15 Standard Practice for Sampling Bituminous Paving Mixtures

    D994/D994M-11(2016) Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type)

    D1073-16 Standard Specification for Fine Aggregate for Asphalt Paving Mixtures

    D1074-09 Standard Test Method for Compressive Strength of Bituminous Mixtures

    D1075-11 Standard Test Method for Effect of Water on Compressive Strength of Compacted Bituminous Mixtures

    D1139/D1139M-15 Standard Specification for Aggregate for Single or Multiple Bituminous Surface Treatments

    D1188-07(2015) Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples

    D1195/D1195M-09(2015) Standard Test Method for Repetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements

    D1196/D1196M-12(2016) Standard Test Method for Nonrepetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements

    D1369-84(2012) Standard Practice for Quantities of Materials for Bituminous Surface Treatments

    D1461-11 Standard Test Method for Moisture or Volatile Distillates in Bituminous Paving Mixtures

    D1560-15 Standard Test Methods for Resistance to Deformation and Cohesion of Asphalt Mixtures by Means of Hveem Apparatus

    D1561/D1561M-13 Standard Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor

    D1665-98(2014) Standard Test Method for Engler Specific Viscosity of Tar Products

    D1751-04(2013)e1 Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types)

    D1752-04a(2013) Standard Specification for Preformed Sponge Rubber Cork and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction

    D1754/D1754M-09(2014) Standard Test Method for Effects of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)

    D1856-09(2015) Standard Test Method for Recovery of Asphalt From Solution by Abson Method

    D1985-13 Standard Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks

    D2026/D2026M-15 Standard Specification for Cutback Asphalt (Slow-Curing Type)

    D2027/D2027M-13 Standard Specification for Cutback Asphalt (Medium-Curing Type)

    D2028/D2028M-15 Standard Specification for Cutback Asphalt (Rapid-Curing Type)

    D2041/D2041M-11 Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures

    D2042-15 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene

    D2170/D2170M-10 Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens)

    D2171/D2171M-10 Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer

    D2172/D2172M-11 Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures

    D2397/D2397M-13 Standard Specification for Cationic Emulsified Asphalt

    D2399-12 Standard Practice for Selection of Cutback Asphalts

    D2419-14 Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate

    D2489/D2489M-16 Standard Test Method for Estimating Degree of Particle Coating of Asphalt Mixtures

    D2493/D2493M-16 Standard Practice for Viscosity-Temperature Chart for Asphalt Binders

    D2628-91(2016) Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements

    D2726/D2726M-14 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures

    D2728-98(2014) Standard Practice for Paving Uses and Application Temperatures for Road Tars

    D2835-89(2012) Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements

    D2872-12e1 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)

    D2940/D2940M-15 Standard Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports

    D2950/D2950M-14 Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods

    D2995-14 Standard Practice for Estimating Application Rate and Residual Application Rate of Bituminous Distributors

    D3042-09(2015) Standard Test Method for Insoluble Residue in Carbonate Aggregates

    D3141/D3141M-15 Standard Specification for Asphalt for Undersealing Portland-Cement Concrete Pavements

    D3142/D3142M-11 Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method

    D3143/D3143M-13 Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus

    D3203/D3203M-11 Standard Test Method for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures

    D3279-12e1 Standard Test Method for n-Heptane Insolubles

    D3289-17 Standard Test Method for Density of Semi-Solid and Solid Asphalt Materials (Nickel Crucible Method)

    D3319-11 Standard Practice for Accelerated Polishing of Aggregates Using the British Wheel

    D3381/D3381M-13 Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction

    D3387-11 Standard Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S. Corps of Engineers Gyratory Testing Machine (GTM)

    D3542-08(2013) Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges

    D3549/D3549M-11 Standard Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens

    D3625/D3625M-12 Standard Practice for Effect of Water on Bituminous-Coated Aggregate Using Boiling Water

    D3628-15 Standard Practice for Selection and Use of Emulsified Asphalts

    D3633/D3633M-12 Standard Test Method for Electrical Resistivity of Membrane-Pavement Systems

    D3665-12 Standard Practice for Random Sampling of Construction Materials

    D3666-16 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials

    D3744/D3744M-11a Standard Test Method for Aggregate Durability Index

    D3910-15 Standard Practices for Design, Testing, and Construction of Slurry Seal

    D4014-03(2012) Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges

    D4070-15 Standard Specification for Adhesive Lubricant for Installation of Preformed Elastomeric Bridge Compression Seals in Concrete Structures

    D4071-84(2016) Standard Practice for Use of Portland Cement Concrete Bridge Deck Water Barrier Membrane Systems

    D4124-09 Standard Test Method for Separation of Asphalt into Four Fractions

    D4125/D4125M-10(2016) Standard Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method

    D4215-07(2013) Standard Specification for Cold-Mixed, Cold-Laid Bituminous Paving Mixtures

    D4280-15 Standard Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers

    D4311/D4311M-15 Standard Practice for Determining Asphalt Volume Correction to a Base Temperature

    D4383-12 Standard Specification for Plowable, Raised Retroreflective Pavement Markers

    D4460-97(2015) Standard Practice for Calculating Precision Limits Where Values are Calculated from Other Test Methods

    D4469-11 Standard Practice for Calculating Percent Asphalt Absorption by the Aggregate in an Asphalt Pavement Mixture

    D4505-12 Standard Specification for Preformed Retroreflective Pavement Marking Tape for Extended Service Life

    D4552/D4552M-10(2016)e1 Standard Practice for Classifying Hot-Mix Recycling Agents

    D4561-11 Standard Practice for Quality Control Systems for Organizations Producing and Applying Bituminous Paving Materials

    D4580/D4580M-12 Standard Practice for Measuring Delaminations in Concrete Bridge Decks by Sounding

    D4592-12 Standard Specification for Preformed Retroreflective Pavement Marking Tape for Limited Service Life

    D4602-93(2015) Standard Guide for Nondestructive Testing of Pavements Using Cyclic-Loading Dynamic Deflection Equipment

    D4694-09(2015) Standard Test Method for Deflections with a Falling-Weight-Type Impulse Load Device

    D4695-03(2015) Standard Guide for General Pavement Deflection Measurements

    D4748-10(2015) Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar

    D4788-03(2013) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography

    D4791-10 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate

    D4792/D4792M-13 Standard Test Method for Potential Expansion of Aggregates from Hydration Reactions

    D4867/D4867M-09(2014) Standard Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures

    D4887/D4887M-11(2016) Standard Practice for Preparation of Viscosity Blends for Hot Recycled Asphalt Materials

    D4956-16b Standard Specification for Retroreflective Sheeting for Traffic Control

    D5078/D5078M-11(2016) Standard Specification for Crack Filler, Hot-Applied, for Asphalt Concrete and Portland Cement Concrete Pavements

    D5106-15 Standard Specification for Steel Slag Aggregates for Bituminous Paving Mixtures

    D5148-10 Standard Test Method for Centrifuge Kerosine Equivalent

    D5167-13 Standard Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation

    D5249-10(2016) Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints

    D5329-16 Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements

    D5340-12 Standard Test Method for Airport Pavement Condition Index Surveys

    D5360-15 Standard Practice for Design and Construction of Bituminous Surface Treatments

    D5361/D5361M-16 Standard Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing

    D5404/D5404M-12 Standard Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator

    D5444-15 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate

    D5505-14 Standard Practice for Classifying Emulsified Recycling Agents

    D5546-09 Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge

    D5581-07a(2013) Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)

    D5624-13 Standard Practice for Determining the Transverse-Aggregate Spread Rate for Surface Treatment Applications

    D5710/D5710M-15 Standard Specification for Trinidad Lake Modified Asphalt

    D5801-12 Standard Test Method for Toughness and Tenacity of Bituminous Materials

    D5821-13 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate

    D5858-96(2015) Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory

    D5893/D5893M-16 Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements

    D5973-97(2012) Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing

    D5977-15 Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures

    D6084/D6084M-13 Standard Test Method for Elastic Recovery of Bituminous Materials by Ductilometer

    D6087-08(2015)e1 Standard Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar

    D6114/D6114M-09 Standard Specification for Asphalt-Rubber Binder

    D6153-15 Standard Specification for Materials for Bridge Deck Waterproofing Membrane Systems

    D6154-15 Standard Specification for Chemically Modified Asphalt Cement for Use in Pavement Construction

    D6155-15 Standard Specification for Nontraditional Coarse Aggregates for Bituminous Paving Mixtures

    D6297-13 Standard Specification for Asphaltic Plug Joints for Bridges

    D6307-16 Standard Test Method for Asphalt Content of Asphalt Mixture by Ignition Method

    D6372-15 Standard Practice for Design, Testing, and Construction of Microsurfacing

    D6373-16 Standard Specification for Performance Graded Asphalt Binder

    D6390-11 Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures

    D6433-16 Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys

    D6521-13 Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)

    D6607-00(2015) Standard Practice for Inclusion of Precision Statement Variation in Specification Limits

    D6608-12 Standard Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes

    D6626-15 Standard Specification for Performance Graded Trinidad Lake Modified Asphalt Binder

    D6627/D6627M-11(2016) Standard Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures

    D6628-16 Standard Specification for Color of Pavement Marking Materials

    D6648-08(2016) Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)

    D6690-15 Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements

    D6703-14 Standard Test Method for Automated Heithaus Titrimetry

    D6704-08(2015) Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material

    D6723-12 Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)

    D6752/D6752M-11 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method

    D6816-11(2016) Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders

    D6857/D6857M-11 Standard Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method

    D6924-03(2012) Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges

    D6925-15 Standard Test Method for Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Superpave Gyratory Compactor

    D6926-16 Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus

    D6927-15 Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures

    D6928-10 Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus

    D6929-16 Standard Practice to Evaluate the Effect of Freezing on Emulsified Asphalts

    D6930-10 Standard Test Method for Settlement and Storage Stability of Emulsified Asphalts

    D6931-12 Standard Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures

    D6932/D6932M-08(2013) Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Mixtures

    D6933-13 Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)

    D6934-08(2016) Standard Test Method for Residue by Evaporation of Emulsified Asphalt

    D6935-11 Standard Test Method for Determining Cement Mixing of Emulsified Asphalt

    D6936-09 Standard Test Method for Determining Demulsibility of Emulsified Asphalt

    D6937-16 Standard Test Method for Determining Density of Emulsified Asphalt

    D6951/D6951M-09(2015) Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications

    D6995-05(2013) Standard Test Method for Determining Field VMA based on the Maximum Specific Gravity of the Mix (Gmm)

    D6997-12 Standard Test Method for Distillation of Emulsified Asphalt

    D6998-11 Standard Practice for Evaluating Aggregate Coating using Emulsified Asphalts

    D6999-12 Standard Practice for Miscibility of Emulsified Asphalts

    D7000-11 Standard Test Method for Sweep Test of Bituminous Emulsion Surface Treatment Samples

    D7063/D7063M-11 Standard Test Method for Effective Porosity and Effective Air Voids of Compacted Bituminous Paving Mixture Samples

    D7064/D7064M-08(2013) Standard Practice for Open-Graded Friction Course (OGFC) Mix Design

    D7113/D7113M-10(2016) Standard Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods

    D7115-10(2015) Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading

    D7116-16 Standard Specification for Joint Sealants, Hot Applied, Jet Fuel Resistant Types, for Portland Cement Concrete Pavements

    D7172-14 Standard Test Method for Determining the Relative Density (Specific Gravity) and Absorption of Fine Aggregates Using Infrared

    D7173-14 Standard Practice for Determining the Separation Tendency of Polymer from Polymer Modified Asphalt

    D7174-05(2016) Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction

    D7175-15 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer

    D7196-16 Standard Test Method for Raveling Test of Cold Mixed Emulsified Asphalt Samples

    D7226-13 Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer

    D7227/D7227M-11e1 Standard Practice for Rapid Drying of Compacted Asphalt Specimens Using Vacuum Drying Apparatus

    D7228-06a(2015) Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures

    D7229-08(2013)e1 Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor

    D7312-10 Standard Test Method for Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST)

    D7313-13 Standard Test Method for Determining Fracture Energy of Asphalt-Aggregate Mixtures Using the Disk-Shaped Compact Tension Geometry

    D7369-11 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension Test

    D7370/D7370M-14 Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion

    D7402-09 Standard Practice for Identifying Cationic Emulsified Asphalts

    D7403-09 Standard Test Method for Determination of Residue of Emulsified Asphalt by Low Temperature Vacuum Distillation

    D7404-07(2016) Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer

    D7405-15 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer

    D7428-15 Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus

    D7460-10 Standard Test Method for Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending

    D7495-12 Standard Specification for Minimum Requirements for Accreditation Bodies that Accredit Agencies Testing and Inspecting Road and Paving Materials

    D7496-11 Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer

    D7497-09(2016) Standard Practice for Recovering Residue from Emulsified Asphalt Using Low Temperature Evaporative Technique

    D7552-09(2014) Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer

    D7553-15 Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide

    D7564/D7564M-16 Standard Practice for Construction of Asphalt-Rubber Cape Seal

    D7585/D7585M-10(2015) Standard Practice for Evaluating Retroreflective Pavement Markings Using Portable Hand-Operated Instruments

    D7643-16 Standard Practice for Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders

    D7741/D7741M-11e1 Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Hand Held Viscometer

    D7870/D7870M-13 Standard Practice for Moisture Conditioning Compacted Asphalt Mixture Specimens by Using Hydrostatic Pore Pressure

    D7906-14 Standard Practice for Recovery of Asphalt from Solution Using Toluene and the Rotary Evaporator

    D7942-15 Standard Specification for Thermoplastic Pavement Markings in Non Snow Plow Areas

    D7944-15 Standard Practice for Recovery of Emulsified Asphalt Residue Using a Vacuum Oven

    D7981-15 Standard Practice for Compaction of Prismatic Asphalt Specimens by Means of the Shear Box Compactor

    D8044-16 Standard Test Method for Evaluation of Asphalt Mixture Cracking Resistance using the Semi-Circular Bend Test (SCB) at Intermediate Temperatures

    D8078-16 Standard Test Method for Ash Content of Asphalt and Emulsified Asphalt Residues

    D8079-16 Standard Practice for Preparation of Compacted Slab Asphalt Mix Samples Using a Segmented Rolling Compactor

    E274/E274M-15 Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire

    E303-93(2013) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester

    E445/E445M-15 Standard Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped With Full-Scale Tires

    E501-08(2015) Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests

    E524-08(2015) Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests

    E556/E556M-11(2015) Standard Test Method for Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform (User Level)

    E660-90(2015) Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine

    E670-09(2015) Standard Test Method for Testing Side Force Friction on Paved Surfaces Using the Mu-Meter

    E867-06(2012) Standard Terminology Relating to Vehicle-Pavement Systems

    E950/E950M-09 Standard Test Method for Measuring the Longitudinal Profile of Traveled Surfaces with an Accelerometer Established Inertial Profiling Reference

    E965-15 Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique

    E1082-90(2012) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness

    E1166-00(2015) Standard Guide for Network Level Pavement Management

    E1170-97(2012) Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces

    E1215-93(2012) Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness

    E1274-03(2012) Standard Test Method for Measuring Pavement Roughness Using a Profilograph

    E1318-09(2017) Standard Specification for Highway Weigh-In-Motion (WIM) Systems with User Requirements and Test Methods

    E1337-90(2012) Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire

    E1364-95(2012) Standard Test Method for Measuring Road Roughness by Static Level Method

    E1448/E1448M-09(2015) Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness

    E1489-08(2013) Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device

    E1551-16 Standard Specification for a Size 4.00-8 Smooth Tread Friction Test Tire

    E1656/E1656M-11(2016) Standard Guide for Classification of Automated Pavement Condition Survey Equipment

    E1703/E1703M-10(2015) Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge

    E1777-09(2015) Standard Guide for Prioritization of Data Needs for Pavement Management

    E1778-98a(2015) Standard Terminology Relating to Pavement Distress

    E1844-08(2015) Standard Specification for A Size 10 × 4–5 Smooth-Tread Friction Test Tire

    E1845-15 Standard Practice for Calculating Pavement Macrotexture Mean Profile Depth

    E1859/E1859M-11(2015) Standard Test Method for Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique

    E1889-97(2015) Standard Guide for Pavement Management Implementation

    E1890-11(2015) Standard Guide for Validating New Area Reference Skid Measurement Systems and Equipment

    E1911-09ae1 Standard Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester

    E1926-08(2015) Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements

    E1927-98(2012) Standard Guide for Conducting Subjective Pavement Ride Quality Ratings

    E1957-04(2010) Standard Practice for Installing Using Pneumatic Tubes with Roadway Traffic Counters and Classifiers

    E1960-07(2015) Standard Practice for Calculating International Friction Index of a Pavement Surface

    E2034-99(2012) Standard Practices for Simulating Truck Response to Longitudinal Profiles of Vehicular Traveled Surfaces

    E2100-04(2015) Standard Practice for Calculating the International Runway Friction Index

    E2101-15 Standard Test Method for Measuring the Frictional Properties of Winter Contaminated Pavement Surfaces Using an Averaging-Type Spot Measuring Decelerometer

    E2133-03(2013) Standard Test Method for Using a Rolling Inclinometer to Measure Longitudinal and Transverse Profiles of a Traveled Surface

    E2157-15 Standard Test Method for Measuring Pavement Macrotexture Properties Using the Circular Track Meter

    E2213-03(2010) Standard Specification for Telecommunications and Information Exchange Between Roadside and Vehicle Systems — 5 GHz Band Dedicated Short Range Communications (DSRC) Medium Access Control (MAC) and Physical Layer (PHY) Specifications

    E2259-03a(2011) Standard Guide for Archiving and Retrieving ITS-Generated Data

    E2300-09(2017) Standard Specification for Highway Traffic Monitoring Devices

    E2340/E2340M-11(2015) Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique

    E2341/E2341M-05(2014) Standard Test Method for Determining the Stopping Distance Number by Initial Speed and Stopping Distance at Traffic Incident Sites

    E2380/E2380M-15 Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter

    E2415-05(2012) Standard Practice for Installing Piezoelectric Highway Traffic Sensors

    E2467-05(2012) Standard Practice for Developing Axle Count Adjustment Factors

    E2468-05(2012) Standard Practice for Metadata to Support Archived Data Management Systems

    E2532-09(2017) Standard Test Methods for Evaluating Performance of Highway Traffic Monitoring Devices

    E2560-13 Standard Specification for Data Format for Pavement Profile

    E2561-07a(2012) Standard Practice for the Installation of Inductive Loop Detectors

    E2583-07(2015) Standard Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)

    E2665-08(2017) Standard Specification for Archiving ITS-Generated Traffic Monitoring Data

    E2666-09(2014) Standard Practice for Correlations of Mu Values of Continuous Friction Measurement Equipment to Determine Maintenance Levels for Use at Airports

    E2667-09(2017) Standard Practice for Acquiring Intersection Turning Movement Traffic Data

    E2759-10 Standard Practice for Highway Traffic Monitoring Truth-in-Data

    E2793-16 Standard Guide for Evaluation, Calibration, and Correlation of E274 Friction Measurement Systems and Equipment

    E2835-11(2015) Standard Test Method for Measuring Deflections using a Portable Impulse Plate Load Test Device

    E2840-11(2015) Standard Practice for Pavement Condition Index Surveys for Interlocking Concrete Roads and Parking Lots

    E2883-13 Standard Guide for Standard Guide for the Evaluation, and Calibration, Continuous Friction Measurement Equipment (CFME)

    E2955-13 Standard Practice for Simulating Profilograph Response to Longitudinal Profiles of Traveled Surfaces

    E3013/E3013M-15 Standard Test Method for Evaluating Concrete Pavement Dowel Bar Alignment Using Magnetic Pulse Induction

    E3028-16e1 Standard Practice for Computing Wheelchair Pathway Roughness Index as Related to Comfort, Passability, and Whole Body Vibrations from Longitudinal Profile Measurements

    More Information


    Print or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2017
       Standards: 287
       Pages: 1846

    - 2016
       Standards: 278
       Pages: 1794