LoginSite MapOnline SupportContactPrivacy PolicyIP Policy
Site Search
 
View Shopping Cart

Standards / Annual Book of ASTM Standards

The 70+ volume Annual Book of ASTM Standards contains ASTM's 12,000+ standards and is available in print, CD-ROM and Online formats (learn more about format options). The volumes can be purchased individually, as a section (at a 25% discount) or as the complete 70+ volume set (at a 50% discount).

 Contents
ASTM Volume 05.04, March 2008
Petroleum Products and Lubricants (IV): D 6557 - latest  
Return to Previous Page


Table of Contents

D6730-01R06E01 Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100\NMetre Capillary (with Precolumn) High-Resolution Gas Chromatography
D6731-01R05 Test Method for Determining the Aerobic, Aquatic Biodegradability of Lubricants or Lubricant Components in a Closed Respirometer
D6732-04 Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry
D6733-01R06 Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography
D6743-06 Test Method for Thermal Stability of Organic Heat Transfer Fluids
D6744-06 Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
D6745-06 Test Method for Linear Thermal Expansion of Electrode Carbons
D6748-02A Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer)
D6749-02R07 Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)
D6750-06 Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine\M1K Procedure (0.4 \% Fuel Sulfur) and 1N Procedure (0.04 \% Fuel Sulfur)
D6751-07B Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
D6756-02 Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
D6791-06 Test Method for Determination of Grain Stability of Calcined Petroleum Coke
D6792-07 Practice for Quality System in Petroleum Products and Lubricants Testing Laboratories
D6793-02R07 Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus
D6794-02R07 Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6-h) Heating Time
D6795-02R07 Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30-min) Heating Time
D6810-07 Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry
D6811-02 Test Method for Measurement of Thermal Stability of Aviation Turbine Fuels under Turbulent Flow Conditions (HiReTS Method)
D6812-04A Practice for Ground-Based Octane Rating Procedures for Turbocharged/Supercharged Spark Ignition Aircraft Engines
D6813-02A Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps
D6821-02E01 Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer
D6822-02 Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
D6823-02 Specification for Commercial Boiler Fuels With Used Lubricating Oils
D6824-07 Test Method for Determining Filterability of Aviation Turbine Fuel
D6837-06 Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIB Spark Ignition Engine
D6838-04 Test Method for Cummins M11 High Soot Test
D6839-02 Test Method for Hydrocarbon Types, Oxygenated Compounds and Benzene in Spark Ignition Engine Fuels by Gas Chromatography
D6849-02 Practice for Storage and Use of Liquefied Petroleum Gases (LPG) in Sample Cylinders for LPG Test Methods
D6891-06A Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine
D6892-03 Test Method for Pour Point of Petroleum Products (Robotic Tilt Method)
D6894-03 Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine
D6895-06 Test Method for Rotational Viscosity of Heavy Duty Diesel Drain Oils at 100|SDC
D6896-03E01 Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature
D6897-03A Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method)
D6898-03 Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig
D6920-03 Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection
D6922-03 Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils
D6923-05 Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine\MCaterpillar 1R Test Procedure
D6969-03 Practice for Preparation of Calcined Petroleum Coke Samples for Analysis
D6970-03 Practice for Collection of Calcined Petroleum Coke Samples for Analysis
D6971-04 Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry
D6973-05 Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
D6974-04 Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels\MFiltration and Culture Procedures
D6975-04 Test Method for Cummins M11 EGR Test
D6984-07 Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine
D6985-04A Specification for Middle Distillate Fuel Oil\MMilitary Marine Applications
D6986-03 Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)
D6987_D6987M-05A Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine
D7038-07 Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants
D7039-07 Test Method for Sulfur in Gasoline and Diesel Fuel by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
D7040-04 Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
D7041-04 Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels, and Oils by Online Gas Chromatography with Flame Photometric Detection
D7042-04 Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
D7043-04A Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump
D7044-04A Specification for Biodegradable Fire Resistant Hydraulic Fluids
D7058-04 Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer
D7059-04E01 Test Method for Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography
D7060-05 Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)
D7061-06 Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene-Containing Heavy Fuel Oils as Separability Number by an Optical Scanning Device
D7094-04 Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
D7095-04 Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip
D7096-05 Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography
D7097-06A Test Method for Determination of Moderately High Temperature Piston Deposits by Thermo-Oxidation Engine Oil Simulation Test\MTEOST MHT
D7098-06E01 Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B
D7109-06 Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus at 30 and 90 Cycles
D7110-05A Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
D7111-05 Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
D7112-05A Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
D7152-05E01 Practice for Calculating Viscosity of a Blend of Petroleum Products
D7153-05 Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)
D7154-05 Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)
D7155-06 Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils
D7156-07 Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine
D7157-05 Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (-Heptane Phase Separation; Optical Detection)
D7169-05 Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography
D7171-05 Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy
D7212-07 Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter
D7213-05 Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 to 615|SDC by Gas Chromatography
D7214-07 Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
D7216-05 Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers
D7217-05 Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
D7220-06 Test Method for Sulfur in Automotive Fuels by Polarization X-ray Fluorescence Spectrometry
D7223-05 Specification for Aviation Certification Turbine Fuel
D7224-07 Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer
D7235-05 Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
D7236-06 Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)
D7260-06 Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants
D7261-07 Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer
D7278-06 Guide for Prediction of Analyzer Sample System Lag Times
D7279-06 Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
D7280-06 Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch by Stainless Steel Crucible Filtration
D7303-06 Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry
D7317-07 Test Method for Coagulated Pentane Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method)
D7318-07 Test Method for Total Inorganic Sulfate in Ethanol by Potentiometric Titration
D7319-07 Test Method for Determination of Total and Potential Sulfate and Inorganic Chloride in Fuel Ethanol by Direct Injection Suppressed Ion Chromatography
D7320-07 Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine
D7328-07E01 Test Method for Determination of Total and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
D7342-07 Test Method for Shear Stability of Lubricating Grease in Presence of Water (Water Stability Test)
D7343-07 Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
D7344-07 Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Mini Method)
D7345-07 Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Micro Distillation Method)
D7346-07 Test Method for No Flow Point of Petroleum Products
D7347-07 Test Method for Determination of Olefin Content in Denatured Ethanol by Supercritical Fluid Chromatography
D7371-07 Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
D7372-07 Guide for Analysis and Interpretation of Proficiency Test Program Results
D7373-07 Test Method for Predicting Biodegradability of Lubricants Usinga Bio-kinetic Model
D7397-07 Test Method for Cloud Point of Petroleum Products (Miniaturized Optical Method)

More Information
Ordering Options
Print, CD-ROM or NOW get Online Access to this Volume
(Basic or Plus)
View Contents
- 2008
Standards: 110
Pages: 1672
- 2007
Standards:126
Pages: 1740