Search ASTM
A01 STEEL, STAINLESS STEEL AND RELATED ALLOYS A04 IRON CASTINGS A05 METALLIC-COATED IRON AND STEEL PRODUCTS B01 ELECTRICAL CONDUCTORS B05 COPPER AND COPPER ALLOYS B07 LIGHT METALS AND ALLOYS C01 CEMENT C04 VITRIFIED CLAY PIPE C07 LIME AND LIMESTONE C09 CONCRETE AND CONCRETE AGGREGATES C11 GYPSUM AND RELATED BUILDING MATERIALS AND SYSTEMS C12 MORTARS AND GROUTS FOR UNIT MASONRY C13 CONCRETE PIPE C14 GLASS AND GLASS PRODUCTS C15 MANUFACTURED MASONRY UNITS C16 THERMAL INSULATION C17 FIBER-REINFORCED CEMENT PRODUCTS C18 DIMENSION STONE C21 CERAMIC WHITEWARES AND RELATED PRODUCTS C24 BUILDING SEALS AND SEALANTS C27 PRECAST CONCRETE PRODUCTS D01 PAINT AND RELATED COATINGS, MATERIALS, AND APPLICATIONS D04 ROAD AND PAVING MATERIALS D07 WOOD D08 ROOFING AND WATERPROOFING D09 ELECTRICAL AND ELECTRONIC INSULATING MATERIALS D11 RUBBER D14 ADHESIVES D18 SOIL AND ROCK D20 PLASTICS D35 GEOSYNTHETICS E05 FIRE STANDARDS E06 PERFORMANCE OF BUILDINGS E33 BUILDING AND ENVIRONMENTAL ACOUSTICS E36 ACCREDITATION & CERTIFICATION E57 3D IMAGING SYSTEMS E60 SUSTAINABILITY F01 ELECTRONICS F06 RESILIENT FLOOR COVERINGS F13 PEDESTRIAN/WALKWAY SAFETY AND FOOTWEAR F16 FASTENERS F17 PLASTIC PIPING SYSTEMS F33 DETENTION AND CORRECTIONAL FACILITIES F36 TECHNOLOGY AND UNDERGROUND UTILITIES G03 WEATHERING AND DURABILITY D21 POLISHES D26 HALOGENATED ORGANIC SOLVENTS AND FIRE EXTINGUISHING AGENTS D33 PROTECTIVE COATING AND LINING WORK FOR POWER GENERATION FACILITIES E05 FIRE STANDARDS E27 HAZARD POTENTIAL OF CHEMICALS E30 FORENSIC SCIENCES E34 OCCUPATIONAL HEALTH AND SAFETY E35 PESTICIDES, ANTIMICROBIALS, AND ALTERNATIVE CONTROL AGENTS E52 FORENSIC PSYCHOPHYSIOLOGY E54 HOMELAND SECURITY APPLICATIONS E58 FORENSIC ENGINEERING F06 RESILIENT FLOOR COVERINGS F08 SPORTS EQUIPMENT, PLAYING SURFACES, AND FACILITIES F10 LIVESTOCK, MEAT, AND POULTRY EVALUATION SYSTEMS F12 SECURITY SYSTEMS AND EQUIPMENT F13 PEDESTRIAN/WALKWAY SAFETY AND FOOTWEAR F15 CONSUMER PRODUCTS F18 ELECTRICAL PROTECTIVE EQUIPMENT FOR WORKERS F23 PERSONAL PROTECTIVE CLOTHING AND EQUIPMENT F26 FOOD SERVICE EQUIPMENT F32 SEARCH AND RESCUE F33 DETENTION AND CORRECTIONAL FACILITIES G04 COMPATIBILITY AND SENSITIVITY OF MATERIALS IN OXYGEN ENRICHED ATMOSPHERES D08 ROOFING AND WATERPROOFING D18 SOIL AND ROCK D19 WATER D20 PLASTICS D22 AIR QUALITY D34 WASTE MANAGEMENT D35 GEOSYNTHETICS E06 PERFORMANCE OF BUILDINGS E44 SOLAR, GEOTHERMAL AND OTHER ALTERNATIVE ENERGY SOURCES E47 E48 BIOENERGY AND INDUSTRIAL CHEMICALS FROM BIOMASS E50 ENVIRONMENTAL ASSESSMENT, RISK MANAGEMENT AND CORRECTIVE ACTION E60 SUSTAINABILITY F20 HAZARDOUS SUBSTANCES AND OIL SPILL RESPONSE F40 DECLARABLE SUBSTANCES IN MATERIALS G02 WEAR AND EROSION
Bookmark and Share

OutReach

OutReach

New Drywall Safety Act Cites ASTM Standard

ASTM C1264 Addresses Origin and Source Labeling of Drywall and Other Gypsum Products

In response to the importation of contaminated drywall that caused health and safety hazards when used in home construction, the Drywall Safety Act of 2012 (PL 112-266) was signed into law by President Barack Obama on Jan. 14. The new law cites ASTM International standard C1264-11, Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling and Storage of Gypsum Panel Products.

“I appreciate the strong bipartisan approval of the Drywall Safety Act of 2012,” says Inez Tenenbaum, chairman, U.S. Consumer Product Safety Commission. “The law gives CPSC important tools to ensure that new domestic and imported drywall is marked as to origin and conforms to limits on sulfur content. CPSC staff collaborated with ASTM on the drywall labeling standard, and we look forward to working with ASTM and members of the C11.01 subcommittee to ensure speedy adoption of a drywall content standard that protects consumers.”

The Drywall Safety Act requires the CPSC to set regulations based on C1264, which was developed by ASTM Subcommittee C11.01 on Specifications and Test Methods for Gypsum Products, part of ASTM Committee C11 on Gypsum and Related Building Materials and Systems. The standard provides the CPSC, states, suppliers and consumers with an effective tool for supply chain communication by specifying that each gypsum panel product or package must be marked for the thickness, the name of the producer or supplier, the brand name, if any, and the ASTM specification for the product. The inclusion of C1264 in the Drywall Safety Act will help builders and consumers better understand the origin and source of drywall and other gypsum products.

“Separating the problem drywall from other products was made more difficult by the limited labeling practices of some producers,” says Dick Engbrecht, chair of C11.01, who notes that the most recent revisions to C1264 expanded the labeling requirements to make identification of drywall by manufacturer, date made and country of origin easier.

The act provides for an effective and efficient means of ensuring that the CPSC adopts the most updated version of ASTM C1264. ASTM standards are reviewed and revised at least once every five years to ensure that the standards continue to meet industry and consumer needs and reflect new information or technologies. The act’s prescribed means of using the most updated ASTM standard ensures public health and safety and reduces confusion in the marketplace.

Under the act’s provisions, ASTM International will notify the CPSC of any updates to the labeling standard within 60 days; the CPSC will then have 90 days to disapprove ASTM’s recommended changes. If the CPSC accepts the most updated version of the ASTM standard, then the new version becomes effective 180 days after ASTM’s initial notification.

Because sulfur content levels in drywall have been associated with elevated corrosion rates in a home, the act requires that the CPSC issue a regulation that limits the sulfur content for drywall manufactured in the United States or imported from abroad. In lieu of issuing a federal rule, the CPSC may adopt a voluntary consensus standard, developed by C11.01, that addresses the level of sulfur content in drywall. Currently, ASTM test methods do not address the sulfur content in drywall, however, C11.01 intends to bring together public and private stakeholders to determine how to best address this need through the possible development of a technical standard.

This article appears in the issue of Standardization News.