Aviation Turbine Fuels Containing Synthesized Hydrob
Renewable synthesized iso-paraffinic fuel has now been included in ASTM International standard D7566, Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons. A recently approved revision that adds SIP fuel to the D7566 annex directly enables use of the fuels in all airlines internationally.
"The introduction of renewable fuel into the aviation industry enables a meaningful reduction of greenhouse gas emissions without compromising fuel performance," says ASTM member Fernando Garcia, senior director, scientific and regulatory affairs, Amyris Inc. "Independent analysis indicates that renewable farnesane hydrocarbon produced from sugar cane can reduce greenhouse gas emissions by more than 50 percent when compared to conventional Jet A/A1 fuel."
Originally approved in 2009, D7566 covers an end-to-end evaluation program to verify and ensure that products covered by the standard are fully compatible with all engine parts and all material and equipment used in the supply chain. The standard has recently been revised to incorporate international material specifications for SIP, or low carbon aviation fuel, ensuring fuel quality equal or superior to petroleum-derived aviation turbine fuels.
ASTM member Olivier Rolland, Total-Amyris alliance manager at Total, notes that D7566 affirms the safety of using renewable fuels in airplanes. "The primary users of the new renewable fuels include the global aviation industry, from fuel producers and distributors, aircraft, fuel system and turbine engine manufacturers, to airlines throughout the world," says Rolland.
In addition to being used to ensure flight safety, D7566 also functions as a reference fuel standard when validating aviation turbine engines, aircraft fuel systems and ground fuel-handling equipment.
D7566 is under the jurisdiction of Subcommittee D02.J0.06 on Emerging Turbine Fuels, part of ASTM International Committee D02 on Petroleum Products, Liquid Fuels and Lubricants.
All interested parties are encouraged to join in the standards developing activities of D02.J0.06. The task group is particularly interested in participation from fuel distributors, airport fuel handlers and airlines that wish to use low carbon aviation turbine fuels, including SIP fuels.
CONTACT Technical Information: Olivier Rolland, Total New Energies USA • Emeryville, Calif. • Phone: 510-788-6732 • Fernando J. Garcia, Amyris • Emeryville, Calif. • Phone: 510-597-4835 | ASTM Staff: Alyson Fick • Phone: 610-832-9710 | Upcoming Meeting: Dec. 7-11 • D02 December Meeting • San Diego, Calif.