A184/A184M-06(2011) Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement
A185/A185M-07 Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete
A20/A20M-11 Standard Specification for General Requirements for Steel Plates for Pressure Vessels
A203/A203M-12 Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel
A242/A242M-04(2009) Standard Specification for High-Strength Low-Alloy Structural Steel
A262-10 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
A263-09 Standard Specification for Stainless Chromium Steel-Clad Plate
A276-10 Standard Specification for Stainless Steel Bars and Shapes
A285/A285M-12 Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
A312/A312M-12 Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
A325-10 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
A352/A352M-06(2012) Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
A353/A353M-09 Standard Specification for Pressure Vessel Plates, Alloy Steel, Double-Normalized and Tempered 9 % Nickel
A36/A36M-08 Standard Specification for Carbon Structural Steel
A370-12 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
A416/A416M-12 Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete
A421/A421M-10 Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete
A479/A479M-11 Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
A490-12 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
A496/A496M-07 Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement
A497/A497M-07 Standard Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete
A500/A500M-10a Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
A501-07 Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
A508/A508M-05b(2010) Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels
A514/A514M-05(2009) Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding
A516/A516M-10 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
A517/A517M-10 Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered
A53/A53M-12 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
A533/A533M-09e1 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
A537/A537M-08 Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
A540/A540M-11 Standard Specification for Alloy-Steel Bolting for Special Applications
A543/A543M-09 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum
A553/A553M-10 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel
A564/A564M-10 Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
A571/A571M-01(2011) Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service
A572/A572M-12 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
A588/A588M-10 Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance
A615/A615M-12 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
A645/A645M-10 Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated
A662/A662M-12 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
A706/A706M-09b Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement
A709/A709M-11 Standard Specification for Structural Steel for Bridges
A710/A710M-02(2007) Standard Specification for Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates
A722/A722M-12 Standard Specification for Uncoated High-Strength Steel Bars for Prestressing Concrete
A736/A736M-03(2007) Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium and Nickel-Copper-Manganese-Molybdenum-Columbium Alloy Steel
A743/A743M-06(2010) Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
A759-10 Standard Specification for Carbon Steel Crane Rails
A767/A767M-09 Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
A795/A795M-08 Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use
A82/A82M-07 Standard Specification for Steel Wire, Plain, for Concrete Reinforcement
A874/A874M-98(2009) Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service
B151/B151M-05(2011) Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar
B22-09e2 Standard Specification for Bronze Castings for Bridges and Turntables
B271-11 Standard Specification for Copper-Base Alloy Centrifugal Castings
B359/B359M-12 Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins
B363-06a Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings
B557-10 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
B61-08 Standard Specification for Steam or Valve Bronze Castings
B633-11 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
B932-04(2010) Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum-Gadolinium Alloy Plate, Sheet, and Strip
C1017/C1017M-07 Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete
C109/C109M-11b Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
C11-10a Standard Terminology Relating to Gypsum and Related Building Materials and Systems
C1174-07 Standard Practice for Prediction of the Long-Term Behavior of Materials, Including Waste Forms, Used in Engineered Barrier Systems (EBS) for Geological Disposal of High-Level Radioactive Waste
C1174-07 Standard Practice for Prediction of the Long-Term Behavior of Materials, Including Waste Forms, Used in Engineered Barrier Systems (EBS) for Geological Disposal of High-Level Radioactive Waste
C127-12 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate
C128-12 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate
C1290-11 Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts
C144-11 Standard Specification for Aggregate for Masonry Mortar
C150/C150M-12 Standard Specification for Portland Cement
C1562-10 Standard Guide for Evaluation of Materials Used in Extended Service of Interim Spent Nuclear Fuel Dry Storage Systems
C1671-07 Standard Practice for Qualification and Acceptance of Boron Based Metallic Neutron Absorbers for Nuclear Criticality Control for Dry Cask Storage Systems and Transportation Packaging
C172/C172M-10 Standard Practice for Sampling Freshly Mixed Concrete
C191-08 Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle
C192/C192M-07 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
C227-10 Standard Test Method for Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method)
C260/C260M-10a Standard Specification for Air-Entraining Admixtures for Concrete
C294-05 Standard Descriptive Nomenclature for Constituents of Concrete Aggregates
C295/C295M-12 Standard Guide for Petrographic Examination of Aggregates for Concrete
C31/C31M-10 Standard Practice for Making and Curing Concrete Test Specimens in the Field
C33/C33M-11a Standard Specification for Concrete Aggregates
C39/C39M-12 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
C42/C42M-12 Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
C494/C494M-11 Standard Specification for Chemical Admixtures for Concrete
C496/C496M-11 Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
C512/C512M-10 Standard Test Method for Creep of Concrete in Compression
C535-09 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
C595/C595M-12e1 Standard Specification for Blended Hydraulic Cements
C597-09 Standard Test Method for Pulse Velocity Through Concrete
C637-09 Standard Specification for Aggregates for Radiation-Shielding Concrete
C685/C685M-11 Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing
C692-08e1 Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel
C696-11 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets
C776-06(2011) Standard Specification for Sintered Uranium Dioxide Pellets
C799-12 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Uranyl Nitrate Solutions
C859-10b Standard Terminology Relating to Nuclear Materials
C94/C94M-12 Standard Specification for Ready-Mixed Concrete
C992-11 Standard Specification for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Spent Fuel Storage Racks
D1129-10 Standard Terminology Relating to Water
D1140-00(2006) Standard Test Methods for Amount of Material in Soils Finer than No. 200 (75-μm) Sieve
D1179-10 Standard Test Methods for Fluoride Ion in Water
D1293-12 Standard Test Methods for pH of Water
D1298-99(2005) Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
D1552-08 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
D1557-12 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))
D1558-10 Standard Test Method for Moisture Content Penetration Resistance Relationships of Fine-Grained Soils
D1599-99(2011) Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
D1796-11 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
D2166-06 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
D2216-10 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
D2220-11 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 75°C Operation
D2276-06 Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
D2434-68(2006) Standard Test Method for Permeability of Granular Soils (Constant Head)
D2435/D2435M-11 Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading
D2487-11 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
D2488-09a Standard Practice for Description and Identification of Soils (Visual-Manual Procedure)
D2622-10 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
D2709-96(2011)e1 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
D2845-08 Standard Test Method for Laboratory Determination of Pulse Velocities and Ultrasonic Elastic Constants of Rock
D2850-03a(2007) Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils
D2859-06(2011) Standard Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials
D2860/D2860M-04(2010) Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90 Angle and Constant Stress
D2936-08 Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens
D2974-07a Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils
D2992-12 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
D3080/D3080M-11 Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions
D3370-10 Standard Practices for Sampling Water from Closed Conduits
D3685/D3685M-98(2005) Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases
D3740-12a Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
D3803-91(2009) Standard Test Method for Nuclear-Grade Activated Carbon
D3843-00(2008) Standard Practice for Quality Assurance for Protective Coatings Applied to Nuclear Facilities
D3867-09 Standard Test Methods for Nitrite-Nitrate in Water
D3911-08 Standard Test Method for Evaluating Coatings Used in Light-Water Nuclear Power Plants at Simulated Design Basis Accident (DBA) Conditions
D3912-10 Standard Test Method for Chemical Resistance of Coatings and Linings for Use in Nuclear Power Plants
D3967-08 Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
D3999-11 Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus
D4015-07 Standard Test Methods for Modulus and Damping of Soils by Resonant-Column Method
D4057-06(2011) Standard Practice for Manual Sampling of Petroleum and Petroleum Products
D4082-10 Standard Test Method for Effects of Gamma Radiation on Coatings for Use in Nuclear Power Plants
D4176-04(2009) Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
D4186-06 Standard Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils Using Controlled-Strain Loading
D421-85(2007) Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants
D422-63(2007) Standard Test Method for Particle-Size Analysis of Soils
D4220-95(2007) Standard Practices for Preserving and Transporting Soil Samples
D4221-11 Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer
D4227-05 Standard Practice for Qualification of Coating Applicators for Application of Coatings to Concrete Surfaces
D4228-05 Standard Practice for Qualification of Coating Applicators for Application of Coatings to Steel Surfaces
D425-88(2008) Standard Test Method for Centrifuge Moisture Equivalent of Soils
D4253-00(2006) Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table
D4254-00(2006)e1 Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
D4286-08 Standard Practice for Determining Coating Contractor Qualifications for Nuclear Powered Electric Generation Facilities
D4294-10 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
D4318-10 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
D4404-10 Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry
D4452-06 Standard Practice for X-Ray Radiography of Soil Samples
D448-08 Standard Classification for Sizes of Aggregate for Road and Bridge Construction
D4525-08 Standard Test Method for Permeability of Rocks by Flowing Air
D4537-12 Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating and Lining Work Inspection in Nuclear Facilities
D4538-05e1 Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities
D4541-09e1 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
D4542-07 Standard Test Method for Pore Water Extraction and Determination of the Soluble Salt Content of Soils by Refractometer
D4612-08 Standard Practice for Calculating Thermal Diffusivity of Rocks
D4643-08 Standard Test Method for Determination of Water (Moisture) Content of Soil by Microwave Oven Heating
D4644-08 Standard Test Method for Slake Durability of Shales and Similar Weak Rocks
D4647-06e1 Standard Test Method for Identification and Classification of Dispersive Clay Soils by the Pinhole Test
D4753-07 Standard Guide for Evaluating, Selecting, and Specifying Balances and Standard Masses for Use in Soil, Rock, and Construction Materials Testing
D4767-11 Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils
D4943-08 Standard Test Method for Shrinkage Factors of Soils by the Wax Method
D4959-07 Standard Test Method for Determination of Water (Moisture) Content of Soil By Direct Heating
D5080-08 Standard Test Method for Rapid Determination of Percent Compaction
D5084-10 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
D5092-04(2010)e1 Standard Practice for Design and Installation of Groundwater Monitoring Wells
D512-10 Standard Test Methods for Chloride Ion In Water
D5139-10 Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants
D5144-08e1 Standard Guide for Use of Protective Coating Standards in Nuclear Power Plants
D516-11 Standard Test Method for Sulfate Ion in Water
D5163-08 Standard Guide for Establishing a Program for Condition Assessment of Coating Service Level I Coating Systems in Nuclear Power Plants
D5311-11 Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil
D543-06 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
D5452-08 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
D5489-07 Standard Guide for Care Symbols for Care Instructions on Textile Products
D5550-06 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
D5607-08 Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force
D5878-08 Standard Guides for Using Rock-Mass Classification Systems for Engineering Purposes
D596-01(2011) Standard Guide for Reporting Results of Analysis of Water
D6217-11 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
D6224-09 Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment
D6677-07 Standard Test Method for Evaluating Adhesion by Knife
D698-12 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))
D7108-05 Standard Guide for Establishing Qualifications for a Nuclear Coatings Specialist
D7167-05 Standard Guide for Establishing Procedures to Monitor the Performance of Safety-Related Coating Service Level III Lining Systems in an Operating Nuclear Power Plant
D7234-05 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
D7282-06 Standard Practice for Set-up, Calibration, and Quality Control of Instruments Used for Radioactivity Measurements
D7491-08 Standard Guide for Management of Non-Conforming Coatings in Coating Service Level I Areas of Nuclear Power Plants
D854-10 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
D95-05(2010) Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
D974-12 Standard Test Method for Acid and Base Number by Color-Indicator Titration
D975-11b Standard Specification for Diesel Fuel Oils
E1005-10 Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance, E 706(IIIA)
E1018-09 Standard Guide for Application of ASTM Evaluated Cross Section Data File, Matrix E 706 (IIB)
E1167-87(2008) Standard Guide for Radiation Protection Program for Decommissioning Operations
E1168-95(2008) Standard Guide for Radiological Protection Training for Nuclear Facility Workers
E119-12 Standard Test Methods for Fire Tests of Building Construction and Materials
E1253-07 Standard Guide for Reconstitution of Irradiated Charpy-Sized Specimens
E1281-10 Standard Guide for Nuclear Facility Decommissioning Plans
E1297-08 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Niobium
E178-08 Standard Practice for Dealing With Outlying Observations
E181-10 Standard Test Methods for Detector Calibration and Analysis of Radionuclides
E1820-11 Standard Test Method for Measurement of Fracture Toughness
E185-10 Standard Practice for Design of Surveillance Programs for Light-Water Moderated Nuclear Power Reactor Vessels
E2005-10 Standard Guide for Benchmark Testing of Reactor Dosimetry in Standard and Reference Neutron Fields
E2006-10 Standard Guide for Benchmark Testing of Light Water Reactor Calculations
E208-06 Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
E23-07ae1 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
E261-10 Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques
E263-09 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Iron
E264-08 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Nickel
E29-08 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E290-09 Standard Test Methods for Bend Testing of Material for Ductility
E399-09e2 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness Ic of Metallic Materials
E482-11 Standard Guide for Application of Neutron Transport Methods for Reactor Vessel Surveillance, E706 (IID)
E488/E488M-10 Standard Test Methods for Strength of Anchors in Concrete Elements
E509-03(2008) Standard Guide for In-Service Annealing of Light-Water Moderated Nuclear Reactor Vessels
E523-11 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Copper
E526-08 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Titanium
E60-11 Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry
E604-83(2008) Standard Test Method for Dynamic Tear Testing of Metallic Materials
E693-12 Standard Practice for Characterizing Neutron Exposures in Iron and Low Alloy Steels in Terms of Displacements Per Atom (DPA), E 706(ID)
E704-08 Standard Test Method for Measuring Reaction Rates by Radioactivation of Uranium-238
E705-08 Standard Test Method for Measuring Reaction Rates by Radioactivation of Neptunium-237
E741-11 Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
E814-11a Standard Test Method for Fire Tests of Penetration Firestop Systems
E84-12 Standard Test Method for Surface Burning Characteristics of Building Materials
E844-09 Standard Guide for Sensor Set Design and Irradiation for Reactor Surveillance, E 706(IIC)
E854-03(2009) Standard Test Method for Application and Analysis of Solid State Track Recorder (SSTR) Monitors for Reactor Surveillance, E706(IIIB)
E910-07 Standard Test Method for Application and Analysis of Helium Accumulation Fluence Monitors for Reactor Vessel Surveillance, E706 (IIIC)
E944-08 Standard Guide for Application of Neutron Spectrum Adjustment Methods in Reactor Surveillance, E706 (IIA)
F1852-11 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
F792-08 Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems
F856-97(2008) Standard Practice for Mechanical Symbols, Shipboard—Heating, Ventilation, and Air Conditioning (HVAC)