Work Items

WK51280 The Use of Invasive Plant Lists in Landscaping Policy-making

WK51284 Standard Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique

WK51132 Standard Practice for Design and Construction of Nonmetallic Enveloped Gaskets for Corrosive Service

WK47816 Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control

WK51095 Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment

WK51017 Standard Guide for Waste Reduction, Resource Recovery, and Use of Recycled Polymeric Materials and Products (Withdrawn 2015)

WK51018 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications (Withdrawn 2015)

WK50913 Standard Specification for Steel Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe

WK50859 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe

WK50861 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)

WK50873 Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe

WK50874 Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric)

WK50875 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe

WK50876 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric)

WK50879 Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe

WK50880 Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric)

WK50846 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings

WK39361 Oxidation of Flexible Graphite

WK50778 Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems

WK50713 Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements

WK49549 Rigid Synthetic Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe

WK50591 Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings

WK50606 Poly(Ether Ether Ketone)Molding and Extrusion Material (PEEK)

WK38560 Ecologically Sustainable Construction Site Waste Management

WK50588 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

WK50560 Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)

WK50557 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors

WK50558 Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)

WK50555 Standard Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers

WK50556 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds

WK50495 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems

WK50478 Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe

WK46559 Standard Specification for PTFE Resin Molded Sheet and Molded Basic Shapes

WK50333 Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing

WK49069 Standard Specification for Metric-Sized Crosslinked Polyethylene (PEX) Pipe Systems

WK50323 Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes

WK43506 Standard Specification for Fiber Reinforced Thermoset Plastic (FRP) Siding

WK50214 the Measurement of Electrode Potentials in Corrosion Testing and Evaluation

WK44146 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems

WK49827 New Standard Practice for the Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using Epoxy/Silicate or Silicate Resins to Form a One Piece Main and Lateral Cured-in-Place Liner

WK50189 Standard Test Methods for Determination of Solution Viscosities of Polyamide (PA)

WK46041 Standard Classification Systems for Shapes Made of Thermoplastic Materials X-15-1213

WK50172 Standard Practice for Installation Acceptance of Plastic Non-pressure Sewer Lines Using Low-Pressure Air

WK50173 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications

WK50138 PUSH-ON TYPE STAINLESS STEEL SHIELDED COUPLINGS JOINING HUBLESS CAST IRON SOIL PIPE AND FITTINGS USING THERMOPLASTIC ELASTOMERIC GASKETS

WK45134 Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems

WK50123 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks

WK50122 Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks

WK50090 Crosslinked Polyethylene (PEX) for Hot- and Cold-Water Hydronic Tubing Distribution Systems with Oxygen Barrier

WK50060 Standard Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility

WK50045 Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings

WK48061 Standard Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers

WK50035 Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP)

WK50007 Standard Test Method for Constant Tensile Load Joint Test (CTLJT)

WK49995 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds

WK49973 Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)

WK49971 Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Materials

WK49972 Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)

WK49976 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Siding

WK47659 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Siding

WK49953 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)

WK49949 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water

WK49939 Standard Guide for Construction Procedures for Buried Plastic Pipe

WK49940 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)

WK49941 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)

WK49908 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)

WK49926 Determination of Gel Content of Crosslinked Polyethylene (PEX) Pipes and Tubing

WK49895 Standard Test Method for Conducting Cyclic Galvanostaircase Polarization

WK49896 Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements

WK49897 Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements

WK49898 Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels

WK46626 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe

WK46627 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)

WK46634 Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe

WK46629 Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric)

WK46630 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe

WK46631 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric)

WK46632 Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe

WK46633 Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric)

WK49850 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core

WK49847 Standard Specification for Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation

WK49848 Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings

WK47172 Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig

WK49808 Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems

WK49807 Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems

WK49799 Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Media Under Pressure (Pneumatic Leak Testing)

WK49794 Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Media Under Pressure (Pneumatic Leak Testing)

WK44042 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)

WK44043 Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe

WK44044 Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric)

WK44046 Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric)

WK44047 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe

WK44048 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric)

WK44041 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe

WK49788 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems

WK49786 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post-Industrial Recycle Content

WK49779 Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)

WK31018 Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method

WK49767 Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)

WK37329 Chemical Resistance of Plastic Pipe and Fittings by Pressure Testing of Piping Systems

WK45218 Standard Test Method for Determining Chemical Compatibility of Substances in Contact with Thermoplastic Pipe and Fittings Materials

WK45669 Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure

WK45670 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings

WK49437 Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete

WK49400 The Development of Multi-Attribute Sustainability Standards for Building Products

WK49348 Standard Test Method for Folding Endurance of Paper by the M.I.T. Tester (Withdrawn 2010)

WK49210 standard practice for the application of polymeric liners inside pipelines.

WK49120 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings

WK46623 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube

WK39632 3 through 24 in. Corrugated Polyethylene Pipe and Fittings with Recycled Resins

WK48933 Standard Specification for PTFE Resin Molded Sheet and Molded Basic Shapes

WK48931 Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials

WK45048 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems

WK45049 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems

WK45050 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems

WK48917 Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings

WK48906 Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes

WK48911 Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer

WK48892 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics

WK48902 Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials

WK48878 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet

WK42084 Standard Specification for Poly(Vinyl Chloride) Resins

WK31420 Establishment of Adequate Infrastructure into the Development of Building Sites Promoting Sustainability

WK31423 Sustainably Siting a Building Relative to the Proximity of Neighborhood Assets

WK31429 Incorporating Street Connectivity Provisions into the Development of Building Sites Promoting Sustainability

WK31430 Standard Specification for Sustainably Siting A Building Relative to the Proximity to Public Transit

WK48774 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion

WK48781 Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene

WK48783 Standard Specification for Modified ETFE-Fluoropolymer Molding and Extrusion Materials

WK48787 Standard Specification for Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials

WK47801 In-field Tensile Testing of Polyethylene (PE) Butt-Fused Joints

WK48760 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings

WK45710 Standard Test Methods for Physical Properties of Smooth-Wall, Coilable, Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable

WK48743 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe

WK48744 Standard Specification for Machine Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges

WK48745 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines

WK48721 Un-Notched Constant Stress Test to Determine the Slow-Crack-Growth Resistance of Corrugated HDPE Pipe or Resins Manufactured with Recycled Content

WK48410 Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings

WK48630 Standard Test Method for Determining the Chemical Resistance of Fiberglass-Reinforced Thermosetting Resins by One-Side Panel Exposure

WK48622 Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter (Withdrawn 2015)

WK48496 Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds

WK48497 Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds

WK48498 Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds

WK48234 Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings

WK48222 Standard Specification for Poly (Vinyl Chloride)(PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits

WK48221 Standard Practice for Installation of Polyethylene (PE) and Encapsulated Cement Mortar Formed in Place Lining System (FIPLS) for the Rehabilitation of Water Pipelines

WK48220 Standard Specification for Polyethylene (PE) and Cement Materials for an Encapsulated Cement Mortar Formed in Place Liner System (FIPLS) for the Rehabilitation of Water Pipelines

WK48219 Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits

WK48217 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit

WK48191 Standard Specification for Polycarbonate (PC) Unfilled and Reinforced Material

WK48195 Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings

WK48135 Standard Specification for Cast Iron Soil Pipe and Fittings

WK48136 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications

WK47848 Standard Practice for Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using a One Piece Main and Lateral Cured-in-Place Liner

WK44998 Special Cast Iron Hubless Fittings used in Single Stack Drain Waste and Vent applications

WK47984 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Siding

WK47959 Standard Specification for Polyphthalamide (PPA) Injection Molding Materials

WK47917 Standard Specification for 30 to 60 in. [750 to 1500 mm] Triple Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications

WK47918 Standard Specification for 30 to 60 in. [750 to 1500 mm] Polypropylene (PP) Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications

WK47898 Modular Stormwater Collection Chambers

WK47854 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water

WK40497 Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits

WK47782 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings

WK46039 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water

WK47774 Standard Classification System for Acrylonitrile-Butadiene-Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials

WK47703 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

WK42443 Installation of Corrugated HDPE and PP Pipe in Agricultural Applications

WK43311 12- to 60-in. [300- to 1500-mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe Containing Recycled PE for Gravity Flow Storm Sewer and Subsurface Drainage Applications

WK47658 Standard Test Method for Using Reflectance Spectra to Produce an Index of Temperature Rise in Polymeric Siding

WK47611 Standard Specification for Polypropylene (PP) Siding

WK43936 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings

WK47554 Standard Test Method for Compressibility and Recovery of Gasket Materials

WK47411 Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems

WK47326 Standard Test Method for Assembly Force of Plastic Underground Conduit Joints That Use Flexible Elastomeric Seals Located in the Bell

WK47300 Standard Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique

WK47173 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems

WK47174 Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

WK47166 Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems

WK47156 Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials