Work Items

WK56852 Standard Specification for Alloy Steel Socket-Head Cap Screws

WK56845 Standard Specification for Ready-Mixed Concrete

WK56854 Standard Test Method for Determination of Total Sediment in Residual Fuels

WK56862 Standard Specification for Diesel Fuel Oils

WK56863 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates

WK56839 Standard Test Method for Flowability and Bearing Area of Chemical-Resistant Polymer Machinery Grouts

WK56840 Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete

WK56841 Standard Test Method for Multielement Analysis of Crude Oils Using Microwave Plasma Atomic Emission Spectrometry (MP-AES)

WK56842 Standard Specification for Ready-Mixed Concrete

WK56843 Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing

WK56827 Standard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction

WK56804 Standard Test Method for Atom Percent Fission in Uranium and Plutonium Fuel (Neodymium-148 Method)

WK56811 Standard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service

WK56812 Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use

WK56813 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength

WK56816 Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates

WK56817 Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates

WK56818 Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications

WK50810 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement

WK56779 Standard Specification for Copper-Nickel Alloy Castings

WK56780 Standard Test Method for Evaluation of Cement Strength Uniformity From a Single Source

WK56789 Standard Specification for Steel Forgings, General Requirements

WK56796 Standard Test Method for Plastic Strain Ratio r for Sheet Metal

WK56798 Standard Specification for Modular Gage Boards

WK56799 Standard Specification for Thrusters, Tunnel, Permanently Installed in Marine Vessels

WK56800 Standard Specification for Envelope Dimensions for Bronze Globe Valves NPS ¼ to 2

WK56801 Standard Specification for Valve Label Plates

WK56802 Standard Specification for Valve Locking Devices

WK56777 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)

WK54658 Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement

WK56765 Standard Specification for Structural Steel for Bridges

WK56772 Standard Test Method for Clay Lumps and Friable Particles in Aggregates

WK56774 Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)

WK56776 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)

WK56778 Standard Specification for Headed Steel Bars for Concrete Reinforcement

WK56758 Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement

WK56759 Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors

WK56760 Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements

WK56761 Standard Specification for Heat Stability of Steam Turbine Shafts and Rotor Forgings

WK56762 Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets

WK56763 Standard Specification for Contact-Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings

WK56724 Standard Test Method for Extended Duration Surface Burning Characteristics of Building Materials (30 min Tunnel Test)

WK56669 Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube

WK56670 Standard Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger Tubes With Integral Fins

WK56668 Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes

WK56671 Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube

WK56654 Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes

WK56653 Standard Test Method for Tensile Strain-Hardening Exponents (n -Values) of Metallic Sheet Materials

WK55601 Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures

WK56641 Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings

WK56593 Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service

WK56616 Standard Specification for Low Leaded Brass Rod, Bar and Shapes

WK56584 Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube

WK56562 Determination of Arch Stiffness Constant (ASC) and Flattening of Corrugated Wall Stormwater Collection Chambers

WK55147 Standard Practice for Optimization of Electrothermal Atomic Absorption Spectrometric Equipment

WK56557 Standard Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration

WK56541 Standard Practice for Describing and Specifying a Direct Current Plasma Atomic Emission Spectrometer

WK56517 Standard Specification for General Requirements for Copper Alloy Castings

WK56507 Standard Specification for Copper Alloy Continuous Castings

WK56489 Standard Specification for Bronze Castings for Bridges and Turntables

WK56484 Handheld Laser Induced Breakdown Spectroscopy for Analysis and Identification of Metallic Alloys

WK56485 Handheld X-Ray Fluorescence Spectroscopy for Analysis and Identification of Metallic Alloys

WK56469 Standard Specification for Precipitation Hardening Nickel Alloys Bar and Wire

WK56467 Standard Practice for Calculating and Using Basic Statistics

WK56472 Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products

WK56470 Standard Specification for Free-Machining Stainless Steel Bars

WK56471 Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service

WK56458 Standard Specification for Seamless Copper Tube for Medical Gas Systems

WK56436 Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range

WK56431 Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)

WK56437 Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service

WK56421 Standard Test Methods for Determination of Maximum Dry Unit Weight and Water Content Range for Effective Compaction of Granular Soils Using a Vibrating Hammer

WK56413 Measurement of Strain Hardening Modulus on Polyethylene Materials used in the Manufacture of Stress-Rated Pipe

WK56353 Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High-Volume Sampler Method)

WK56355 Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter)

WK56356 Standard Test Methods for Evaluation of Total Sulfation Activity in the Atmosphere by the Lead Dioxide Technique

WK56358 Standard Practice for Sampling of Process Vents With a Portable Gas Chromatograph

WK56359 Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat

WK56366 Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service

WK54965 Standard Specification for Reinforced and Plain Gummed Tape for Sealing and Securing

WK56333 Standard Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes

WK56334 Standard Specification for Aluminum Bronze Rod, Bar, and Shapes

WK56335 Standard Specification for Copper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire

WK56332 Standard Specification for Phosphor Bronze Rod, Bar, and Shapes

WK56331 Standard Specification for Manganese Bronze Rod, Bar, and Shapes

WK56330 Standard Specification for General Requirements for Copper Alloy Castings

WK56328 Standard Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings

WK56321 Standard Test Methods for Fire Tests of Building Construction and Materials

WK56318 Standard Guide for Fire-Resistance Experiments

WK56322 Standard Test Methods for Fire Tests of Building Construction and Materials

WK56302 Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing

WK56264 Evaluating and Expressing the Uncertainty of Radiochemical Measurements

WK56260 Standard Terminology for Radiochemical Analyses

WK56223 Standard Practice for Conditioning of Thermal Insulating Materials

WK56226 Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Cohesive Soils (Withdrawn 2016)

WK56227 Standard Specification for Fuel Oils

WK56212 Standard Test Method for Nondestructive Assay of Nuclear Material in Scrap and Waste by Passive-Active Neutron Counting Using 252Cf Shuffler

WK56213 Standard Test Method for Nondestructive Assay of Plutonium by Passive Neutron Multiplicity Counting

WK56214 Standard Test Method for Measurement of 235U Fraction Using Enrichment Meter Principle

WK56215 Standard Test Method for Accelerated Leach Test for Diffusive Releases from Solidified Waste and a Computer Program to Model Diffusive, Fractional Leaching from Cylindrical Waste Forms

WK56220 Determination of Uranium and Plutonium Concentration in Aqueous Solutions Using Hybrid K-Edge Densitometry and X-Ray Fluorescence

WK56199 Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes

WK56207 Standard Guide for Developing Appropriate Statistical Approaches for Groundwater Detection Monitoring Programs

WK56208 Standard Practice for (Field Procedure) for Constant Drawdown Tests in Flowing Wells for Determining Hydraulic Properties of Aquifer Systems

WK56209 Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems

WK56180 Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis

WK56181 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption

WK56182 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

WK56183 Sampling Crude Oils for Analysis

WK56171 Spectroscopic Determination of Haze in Fuels

WK56161 Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels

WK56157 Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration

WK56141 Standard Test Method for Determining Filter Blocking Tendency

WK56145 Standard Specification for Gear Bronze Alloy Castings

WK56135 Standard Specification for Nickel Alloy Forgings

WK56136 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod

WK56137 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Tungsten, and Low-Carbon Nickel-Molybdenum-Chromium Alloy Plate, Sheet, and Strip

WK56138 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe

WK56139 Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube

WK56140 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube

WK56122 Standard Test Method for Aluminum in Water

WK56123 Standard Test Methods for Manganese in Water

WK56124 Standard Test Method for Hardness in Water

WK56125 Standard Test Methods for Chromium in Water

WK56126 Standard Test Methods for Copper in Water

WK56127 Standard Test Methods for Zinc in Water

WK56128 Standard Test Method for Total Mercury in Water

WK56129 Standard Test Method for Molybdenum in Water

WK56130 Standard Test Method for Vanadium in Water

WK56131 Standard Test Methods for Cadmium in Water

WK56132 Standard Test Method for Antimony in Water

WK56110 Standard Specification for Copper Alloy Addition Agents

WK47911 Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs

WK56078 Standard Guide for Selection of Aquifer Test Method in Determining Hydraulic Properties by Well Techniques

WK56084 Standard Guide for Locating Abandoned Wells

WK56085 Standard Guide for Selecting a Groundwater Modeling Code

WK56088 Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins

WK56069 Standard Specification for Alloy Structural Steel Plates

WK56068 Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method

WK56052 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings

WK56051 Standard Specification for Stainless Steel Bars and Shapes

WK56050 Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

WK56045 Standard Practice for Passive Soil Gas Sampling in the Vadose Zone for Source Identification, Spatial Variability Assessment, Monitoring, and Vapor Intrusion Evaluations

WK56044 Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer Taking into Consideration Storage of Water in Leaky Confining Beds by Modified Hantush Method

WK56035 Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube

WK56036 Standard Specification for Seamless and Welded Copper–Nickel Tubes for Water Desalting Plants

WK56037 Standard Specification for Welded Brass Tube

WK56038 Standard Specification for Welded Copper Heat Exchanger Tubes With Internal Enhancement

WK56010 Standard Specification for Steel Tubes, Carbon and Carbon Manganese with Textured Surface, Fusuion Welded for Heat Exchanger and Condenser Tubes.

WK56016 Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings

WK55988 Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures

WK56000 Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction

WK55972 Standard Practice for Calculating and Using Basic Statistics

WK55975 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration

WK55976 Standard Practice for Making and Curing Concrete Test Specimens in the Field

WK55977 Standard Guide for Sampling of Crude Oils for Analysis

WK55978 Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)

WK55983 Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts

WK55984 Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use

WK55985 Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use

WK55986 Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts

WK55961 Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment

WK55959 Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes

WK55969 Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete

WK55934 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter

WK55911 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method

WK51917 Specifying Water Vapor Transmission Material Properties of Water Resistive Barriers and Air Barriers

WK55922 Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications

WK55929 Standard Specification for Steel Forgings, Alloy, for Carburizing Applications

WK55908 Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels

WK55887 Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes

WK55890 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) by Visual Observation

WK55891 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)

WK55897 Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes

WK55899 Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)

WK28558 Sizing and Counting Particulates in Light and Middle Distillate fuels, Using Off-line and On-line Particle Counters

WK55865 Standard Practice for Design of Surveillance Programs for Light-Water Moderated Nuclear Power Reactor Vessels

WK55866 Standard Practice for Evaluation of Surveillance Capsules from Light-Water Moderated Nuclear Power Reactor Vessels

WK55879 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source

WK55852 Standard Specification for Fuel Oils

WK55836 Standard Practice for Estimation of Chlorine Demand of Water

WK55837 Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe

WK55829 Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service

WK55803 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source

WK55814 Standard Specification for Steel Forgings, General Requirements

WK55793 Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis

WK55797 Measuring Capture Efficiency of Domestic Range Hoods

WK55776 Standard Specification for Chemical Admixtures for Concrete

WK55749 Standard Specification for High Strength Structural Bolts, Steel and Alloy Steel, Heat Treated, 120 ksi (830 MPa) and 150 ksi (1040 MPa) Minimum Tensile Strength, Inch and Metric Dimensions

WK55745 Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces

WK55734 Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow

WK55729 Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings

WK55705 Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes

WK55704 Standard Specification for General Requirements for Alloy and Stainless Steel Pipe

WK55708 Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes

WK55706 Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service

WK55707 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service

WK55712 Standard Specification for Diesel Fuel Oils

WK55713 Standard Specification for Diesel Fuel Oils

WK55709 Standard Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes

WK55695 Standard Specification for Screws, Alloy Steel, Heat Treated, 170 ksi Minimum Tensile Strength

WK55680 Standard Specification for Castings, Nickel and Nickel Alloy

WK33685 Characterizing Charged-Particle Irradiations of Materials in Terms of Non-Ionizing Energy Loss (NIEL)

WK55659 Standard Test Method for Measurement of Gaseous Chlorides and Fluorides from Mineral Calcining Exhaust Sources—Impinger Method

WK55653 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range

WK55371 Standard Practices for Sampling Water from Closed Conduits

WK55373 Standard Practice for Sampling Steam

WK55639 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials

WK55640 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials

WK55641 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials

WK55642 Standard Test Method for Dynamic Tear Testing of Metallic Materials

WK55643 Standard Test Method for Impact Testing of Miniaturized Charpy V-Notch Specimens

WK55644 Standard Test Method for Instrumented Impact Testing of Metallic Materials

WK55646 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range

WK55647 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range

WK55636 Standard Specification for Nickel Alloy Forgings

WK55628 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products

WK55612 Standard Test Method for Middle Distillate Fuel Storage Stability at 43 °C (110 °F)

WK55607 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)

WK54701 Standard Specification for Test Coupons for Steel Castings

WK55595 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer

WK55600 Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application

WK55591 Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both

WK55594 Standard Test Method for Shear Testing of Aluminum Alloys

WK55584 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)

WK55582 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)

WK55583 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)

WK55585 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)

WK55576 Standard Guide for Monitoring the Neutron Exposure of LWR Reactor Pressure Vessels

WK55566 Standard Test Method for Slump of Hydraulic-Cement Concrete

WK55548 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens

WK30656 Determining the Fire Resistance of Building Perimeter Containment Systems because of External Spread of Fire

WK51982 Fabricating and Testing Specimens of Ultra-High Performance Concrete

WK55556 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis

WK55529 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe

WK55530 Standard Specification for UNS N08925, UNS N08031, UNS N08932, UNS N08926, UNS N08354, UNS N08830, and UNS R20033 Plate, Sheet, and Strip

WK55531 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube

WK55544 Standard Specification for Diesel Fuel Oils

WK55525 Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples

WK55527 Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube

WK55528 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod

WK55532 Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire

WK55515 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry

WK55514 Standard Practice for Making and Curing Concrete Test Specimens in the Field

WK55516 Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

WK55111 Standard Performance Specification for Hydraulic Cement

WK55112 Standard Specification for Blended Hydraulic Cements

WK55477 Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High-Volume Sampler Method)

WK55475 Standard Practice for Conducting a Patch Test to Assess Coating Compatibility

WK55424 Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation

WK55425 Standard Test Method for Removing Volatile Contaminants from Used Engine Oils by Stripping

WK55426 Standard Test Method for Trace Sediment in Lubricating Oils

WK55421 Standard Guide for Determination of Various Elements by Direct Current Plasma Atomic Emission Spectrometry

WK55422 Standard Practice for Describing and Specifying a Direct Current Plasma Atomic Emission Spectrometer

WK55423 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners

WK55427 Standard Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig

WK55377 Standard Specification for Mechanical Seals for Shipboard Pump Applications

WK55370 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications

WK55367 Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing

WK55368 Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range

WK55358 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry

WK55360 Standard Specification for Fuel Oils

WK55355 Standard Guide for Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS) as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes

WK55356 Standard Practices for Calibration of Ozone Monitors Using Transfer Standards

WK55357 Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils

WK55191 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method

WK55333 Standard Specification for Concrete Aggregates

WK55346 Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens

WK55305 Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors

WK55332 Standard Specification for Superstrength Alloy Steel Forgings

WK55267 Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty

WK55269 Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe Machine

WK55260 Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins

WK55248 Standard Specification for Composition Bronze or Ounce Metal Castings

WK51585 Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method

WK53467 Stainless Steel for Bridges and Transportation Structures

WK54983 Standard Test Method for Expansion Index of Soils

WK55251 Standard Specification for Brass Rod, Bar, and Shapes

WK55252 Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes

WK55253 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings

WK55254 Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)

WK55261 Standard Test Methods for Determination of Gold in Bullion by Fire Assay Cupellation Analysis

WK55246 Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction

WK23938 Admixtures to Reduce Drying Shrinkage of Concrete

WK55221 Standard Specification for High Strength Steel Castings in Heavy Sections

WK55222 Standard Practice for Evaluating the Condition of Concrete Plates Using the Impulse-Response Method

WK55223 Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method

WK55224 Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance

WK55225 Standard Specification for Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete

WK55226 Standard Specification for Cold-Weather Admixture Systems

WK55213 Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts

WK55217 Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears

WK55218 Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines

WK55205 Standard Specification for Copper-Beryllium Alloy Seamless Tube

WK55206 Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils

WK46574 Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines

WK51560 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method

WK49066 Standard Practice for Capping Cylindrical Concrete Specimens

WK55173 Permanent Coatings and Fixatives to Mitigate the Spread of Radioactive Contamination

WK55176 Standard Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used to Prevent Flash Rusting of Steel When Water or Water/Abrasive Blasted

WK55178 Strippable Coatings for Decontamination and to Mitigate Spread of Radioactive Contamination

WK55179 Standard Practice for Mixing Thermal Insulating Cement Samples

WK55180 Standard Test Method for Covering Capacity and Volume Change Upon Drying of Thermal Insulating Cement

WK55181 Standard Test Methods for Determining the Organic Treat Loading of Organophilic Clay

WK55183 Standard Test Methods and Definitions for Mechanical Testing of Steel Products

WK55187 Standard Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube (UNS No. C17510)

WK55189 Standard Specification for Copper-Beryllium Seamless Tube (UNS Nos. C17500 and C17510)

WK55192 Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes

WK55133 Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service

WK55134 Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe

WK55137 Radial Hydride Treatment and Ring Compression Testing of Zircaloy-based Spent Fuel Cladding

WK55053 Standard Guide for Selection and Use of Neutron Sensors for Determining Neutron Spectra Employed in Radiation-Hardness Testing of Electronics

WK55082 Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service

WK55083 Describing and Specifying Inductively Coupled Plasma (Quadrupole) Mass Spectrometers

WK55031 Standard Specification for Fuel Oils

WK55088 Standard Practice for Sampling Aluminum Ingots, Billets, Castings and Finished or Semi-Finished Wrought Aluminum Products for Compositional Analysis

WK55093 Standard Test Method for Surface Burning Characteristics of Building Materials

WK55103 Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products

WK55035 Standard Specification for Copper-Alloy Die Castings

WK55040 Standard Test Method for CBR (California Bearing Ratio) of Soils in Place

WK55042 Standard Specification for Ready-Mixed Concrete

WK55060 Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

WK55062 Standard Practice/Guide for Monitoring Cooling Water Systems to minimize Energy and Water use while preventing System Degradation.

WK55068 Standard Test Method for Shear Testing of Aluminum Alloys

WK55078 Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics

WK54994 Determination of Hydrogen (total from all sources) in Mixed Oxide ((U, Pu)O2) Sintered Pellets by the Inert Gas Fusion Technique Followed by Thermal Conductivity Measurement

WK54987 Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete

WK55027 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)

WK55028 Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts

WK55029 Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use

WK55030 Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts

WK54985 Consolidated Undrained Cyclic Simple Shear Test with Load Control or Displacement Control

WK52956 Standard Specification for Ready-Mixed Concrete

WK54982 Standard Guides for Using Rock-Mass Classification Systems for Engineering Purposes

WK54973 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws

WK54970 Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential

WK54961 Standard Practice for Neutron Radiation Damage Simulation by Charged-Particle Irradiation

WK54962 Standard Practice for Measurement of Mechanical Properties During Charged-Particle Irradiation

WK54963 Standard Practice for Conducting Irradiations at Accelerator-Based Neutron Sources

WK54964 Standard Guide for Spectrometric Analysis of Reactive and Refractory Metals

WK54960 Standard Guide for Simulation of Helium Effects in Irradiated Metals

WK54936 Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing

WK54935 Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying

WK54876 Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes

WK54917 Standard Specification for Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip)

WK54921 Standard Test Methods for Prebored Pressuremeter Testing in Soils (Withdrawn 2016)

WK54885 Standard Specification for Castings, Nickel-Aluminum Ordered Alloy

WK51098 Standard Practice for Estimation of Chlorine Demand of Water

WK54875 Standard Practice for Handling of High Purity Water Samples

WK54861 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water

WK54820 Standard Test Method for 99Tc in Water by Solid Phase Extraction Disk

WK54821 Standard Practice for Calculation of Dose Equivalent Xenon (DEX) for Radioactive Xenon Fission Products in Reactor Coolant

WK54829 Uranium in drinking water by ICP-MS

WK54805 Standard Specification for Hardened Steel Washers [Metric]

WK54808 Standard Specification for Epoxy-Coated Steel Dowels for Concrete Pavement

WK54790 Standard Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube

WK54773 Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both

WK54405 Standard Test Methods for Modulus and Damping of Soils by Fixed-Base Resonant Column Devices

WK54757 Standard Test Method (Analytical Procedure) for Determining Transmissivity of Nonleaky Confined Aquifers by Overdamped Well Response to Instantaneous Change in Head (Slug Tests)

WK54761 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings

WK54762 Standard Specification for General Requirements for Wrought Copper Alloy Wire

WK54765 Standard Specification for Seamless Copper Tube, Bright Annealed

WK54766 Standard Specification for Steel Forgings, Microalloy, for General Industrial Use

WK54767 Standard Specification for Steel Forgings, General Requirements

WK54751 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar

WK54734 Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling

WK54737 Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness

WK54729 Standard Specification for Free-Cutting Bismuth Brass Rod, Bar and Wire

WK54730 Standard Specification for Copper-Zinc-Tin-Bismuth Alloy Rod, Bar and Wire

WK54731 Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)

WK54733 Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling

WK54726 Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes

WK54727 Standard Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence

WK54728 Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)

WK54719 Standard Specification for Superstrength Alloy Steel Forgings

WK54619 Using Temperature as a Relative Indication of Time of Setting of Cementitious Mixtures

WK48745 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines

WK53807 Seamless Copper Tube for Linesets

WK54725 Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends

WK54703 Rapid Measure of Shear Strength of Cohesive Soils by Handheld Shear Vane

WK54709 Standard Specification for High Strength Structural Bolt Assemblies, Steel and Alloy Steel, Heat Treated, 144ksi Minimum Tensile Strength, Inch Dimensions

WK41447 Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement

WK54696 Standard Specification for Sintered (Uranium-Plutonium) Dioxide Pellets

WK54693 Standard Specification for Epoxy-Coated Steel Reinforcing Bars

WK54694 Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars

WK54663 Standard Specification for Steel Plates, 9 %  Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process

WK54682 Regression Analysis

WK54661 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method

WK54660 Reliability

WK54655 Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete

WK54656 Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement

WK54657 Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement

WK54643 Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete

WK54644 Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete

WK54646 Standard Specification for Uncoated, Weldless, 2-Wire and 3-Wire Steel Strand for Prestressed Concrete

WK49946 Standard Practice for Describing and Specifying Inductively-Coupled Plasma Atomic Emission Spectrometers

WK5436 Guide for Extension of Data from Fire Tests Conducted in Accordance with ASTM E 1966

WK52349 Standard Test Method for Measurement of Fracture Toughness

WK54616 Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing

WK40715 Standard Guide for Drying Behavior of Spent Nuclear Fuel

WK54610 Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products

WK54611 Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions

WK54614 Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation

WK54583 Standard Test Methods and Definitions for Mechanical Testing of Steel Products

WK54591 Standard Practice for Estimating Concrete Strength by the Maturity Method

WK50559 Standard Specification for Portland Cement

WK43936 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings

WK54537 Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method)

WK54538 Standard Test Methods for Physical Properties of Smooth-Wall, Coilable, Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable

WK54553 Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens

WK54524 Standard Specification for Portland Cement

WK54518 Standard Practice for Security Checkpoint Metal Detector Screening of Persons with Medical Devices

WK53114 Standard Specification for Blended Hydraulic Cements

WK54526 Standard Specification for Blended Hydraulic Cements

WK54529 Standard Specification for Blended Hydraulic Cements

WK54530 Standard Specification for Blended Hydraulic Cements

WK54513 Standard Test Method for Oxidation Stability of Spark Ignition Fuel—Rapid Small Scale Oxidation Test (RSSOT)

WK54480 Standard Specification for Common Requirements for Wrought Steel Piping Fittings

WK54481 Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications

WK54477 Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus

WK54445 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products

WK54446 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)

WK54419 Standard Test Method for Organic Impurities in Fine Aggregates for Concrete

WK54422 Determining VOC Concentrations and Source Emission Rates in the Outdoor Ambient Atmosphere

WK54398 Standard Test Method for Measurement of Fracture Toughness

WK54389 Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels

WK50811 Standard Practice for Design and Installation of Groundwater Monitoring Wells

WK54390 Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers

WK54404 The Determination of Carbon and Sulfur Content in Plutonium Oxide Powder by the Direct Combustion-Infrared Spectrophotometer

WK49588 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis

WK38106 Particle Size Anaylsis For Soils Combining The Sieve and Sedimentation Techniques

WK54388 Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings

WK54358 Standard Specification for General Requirements for Alloy and Stainless Steel Pipe

WK54369 Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection

WK54318 Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals

WK54322 Standard Practice for Passive Soil Gas Sampling in the Vadose Zone for Source Identification, Spatial Variability Assessment, Monitoring, and Vapor Intrusion Evaluations

WK54317 Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals

WK54326 Standard Specification for Inch Series Machine Screws, Carbon Steel, 60 000 psi Tensile Strength

WK54277 Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures

WK54245 Standard Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials

WK54243 Standard Test Method for 238Pu Isotopic Abundance By Alpha Spectrometry

WK54246 New Test Method for Coupled Particulate and Elemental Analysis using XRF for In-Service Lubricants

WK54236 Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service

WK54215 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings

WK54177 Standard Specification for Seamless Copper Tube

WK54186 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Light Duty Vehicles (Gravimetric Method)

WK54160 Standard Test Method for Shrinkage Factors of Soils by the Wax Method

WK54142 Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete

WK44442 Organic Basicity Determination by Potentiometric Hydrochloric Acid Titration

WK48359 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass

WK54111 Standard Specification for Seamless Copper Tube for Medical Gas Systems

WK54112 Standard Specification for Seamless Copper Water Tube

WK54113 Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service

WK54114 Standard Specification for Seamless Copper Tube for Medical Gas Systems

WK51207 Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel

WK51054 Standard Specification for Stainless Steel Wire

WK54021 Standard Practice for Indicating Oil in Abrasives

WK54020 Standard Practice for Conducting a Patch Test to Assess Coating Compatibility

WK54016 Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate

WK54017 Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate

WK53976 Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service

WK53981 Standard Specification for UNS N08020 Alloy Plate, Sheet, and Strip

WK53982 Standard Specification for Welded UNS N08020 Alloy Tubes

WK53985 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube

WK53986 Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe and Tube

WK53987 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Plate, Sheet,

WK53988 Standard Specification for Nickel-Iron-Chromium Alloy Rod and Bar

WK53989 Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip

WK53990 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825, N08221, and N06845) Seamless Pipe and Tube

WK53991 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825, UNS N08221, and UNS N06845) Plate, Sheet, and Strip

WK53992 Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, UNS N10242)* Plate, Sheet, and Strip

WK53993 Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip

WK53994 Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod

WK53995 Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, N10242)* Rod

WK53996 Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod

WK53997 Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire

WK53998 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe

WK53999 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Tube

WK54000 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip

WK54001 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube

WK54002 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube

WK54003 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and Strip

WK54004 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06110) Rod and Bar

WK54005 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe

WK54006 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube

WK54007 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Pipe and Tube

WK54008 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920) Plate, Sheet, and Strip

WK54009 Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod

WK54010 Standard Specification for Precipitation-Hardening Nickel Alloys Plate, Sheet, and Strip

WK52934 Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Cohesive Soils (Withdrawn 2016)

WK53950 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)

WK53951 Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy

WK49652 Standard Test Method for Measurement of Fracture Toughness

WK41558 Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration

WK53933 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil

WK53921 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)

WK53922 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)

WK53923 Standard Test Method for Water in Crude Oil by Distillation

WK53905 Standard Practices for Sampling Uranium-Ore Concentrate

WK53906 Standard Test Methods for Chemical and Atomic Absorption Analysis of Uranium-Ore Concentrate

WK53907 Standard Guide for Selection of Security Technology for Protection Against Counterfeiting, Alteration, Diversion, Duplication, Simulation, and Substitution (CADDSS) of Products or Documents

WK53860 Standard Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors

WK53827 Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service

WK37098 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory

WK37105 Standard Practice for Making and Curing Concrete Test Specimens in the Field

WK52536 Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction

WK53818 Standard Specification for Ready-Mixed Concrete

WK50586 Measuring the Electrical Resistance of Fresh Concrete

WK53791 Standard Test Method for Oxidation Stability of Biodiesel (B100) and Blends of Biodiesel with Middle Distillate Petroleum Fuel (Accelerated Method)

WK53799 Standard Specification for Precipitation Hardened or Cold Worked, Seamless Nickel Alloy Pipe and Tube

WK53764 Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball (Withdrawn 2015)

WK53590 Standard Test Method for the Continuous Measurement of Dissolved Ozone in Low Conductivity Water

WK38293 Standard Specification for Gas Turbine Fuel Oils

WK53746 Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in Vadose Zone

WK53748 Standard Specification for Steel Castings, Carbon, for General Application

WK53749 Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service

WK53750 Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines

WK53751 Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service

WK53752 Standard Specification for Ferrochrome-Silicon

WK53737 Standard Test Method for Determination of Low Concentrations of Uranium in Oils and Organic Liquids by X-ray Fluorescence

WK53730 Standard Practice for Fracture Testing with Surface-Crack Tension Specimens

WK53736 Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes

WK49068 Determining the Specific Gravity and Absorption of Coarse Grained Particles in Soils

WK48553 Standard Guide for Benchmark Testing of Light Water Reactor Calculations

WK45693 On-Line Monitoring of Total Nitrogen and Total Phosphorus in Water by Catalyzed Ozone Hydroxyl Radical Oxidation and Detection of Resulting Nitrate and Phosphate

WK46340 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels

WK53726 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum

WK46531 Standard Test Methods for Fire Tests of Building Construction and Materials

WK49155 Standard Test Method for Determination of the Accelerated Hydrogen Sulfide Breakthrough Capacity of Granular and Pelletized Activated Carbon

WK53700 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

WK53701 Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric)

WK53702 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

WK53703 Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)

WK53704 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

WK53705 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength

WK53715 Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement

WK53716 Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete

WK53643 Standard Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

WK53641 Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings

WK53642 Standard Test Methods for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars

WK53633 Standard Test Method for Barium in Brines, Seawater, and Brackish Water by Direct-Current Argon Plasma Atomic Emission Spectroscopy

WK53626 Standard Test Method for Dissolved Hexavalent Chromium in Water by Ion Chromatography

WK53627 Standard Test Methods for Nitrite-Nitrate in Water

WK53628 Standard Practices for Digestion of Water Samples for Determination of Metals by Flame Atomic Absorption, Graphite Furnace Atomic Absorption, Plasma Emission Spectroscopy, or Plasma Mass Spectrometry

WK53629 Standard Guide for Preparation of Biological Samples for Inorganic Chemical Analysis

WK53630 Standard Practice for Measuring Elements in Water by Flame Atomic Absorption Spectrophotometry

WK53631 Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry

WK53632 Standard Test Method for Barium in Brackish Water, Seawater, and Brines

WK53644 Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

WK53645 Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

WK53646 Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

WK53601 Standard Test Method for Leeb Hardness Testing of Steel Products

WK53602 Standard Practice for Describing and Specifying a Wavelength-Dispersive X-Ray Spectrometer

WK53612 Standard Practices for Preparing Rock Core as Cylindrical Test Specimens and Verifying Conformance to Dimensional and Shape Tolerances

WK53614 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Using Diametrically Loaded 76-mm (3-in.) Borehole Jack

WK53615 Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method—USBM Borehole Deformation Gauge

WK53581 Standard Test Method for Leeb Hardness Testing of Steel Products

WK53582 Standard Test Method for Leeb Hardness Testing of Steel Products

WK53586 Standard Guide for Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals, Ores, and Related Materials

WK53599 Standard Test Method for Determination of Impurities in Nuclear Grade Uranium Compounds by Inductively Coupled Plasma Mass Spectrometry

WK53364 Standard Guide for Determining Neutron Energy Spectra from Neutron Sensors for Radiation-Hardness Testing of Electronics

WK53570 Standard Test Method for pH Measurement of Water of Low Conductivity

WK53571 Standard Guide for Optimization of Groundwater Monitoring Constituents for Detection Monitoring Programs for RCRA Waste Disposal Facilities

WK53572 Standard Guide for Selection and Documentation of Existing Wells for Use in Environmental Site Characterization and Monitoring

WK53580 Standard Guide for Limiting Water-Induced Damage to Buildings

WK49926 Determination of Gel Content of Crosslinked Polyethylene (PEX) Pipes and Tubing

WK53567 Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

WK53561 Standard Test Method for Leeb Hardness Testing of Steel Products

WK53562 Standard Guide for Describing the Functionality of a Groundwater Modeling Code

WK53563 Standard Guide for Application of a Groundwater Flow Model to a Site-Specific Problem

WK53564 Standard Guide for Applying Statistical Methods for Assessment and Corrective Action Environmental Monitoring Programs

WK37135 Standard Practice for Description and Identification of Soils (Visual-Manual Procedure)

WK42489 Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes

WK53551 Standard Specification for Steel Castings, Stainless, Precipitation Hardening

WK42742 Standard Test Methods for Fire Tests of Building Construction and Materials

WK53526 Guide for Elemental Analysis of Crude Oil

WK53498 Standard Terminology for Anchors and Fasteners in Concrete and Masonry

WK53491 Standard Specification for Carbon Steel Lifting Eyes

WK53489 Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete

WK53488 Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted for Prestressed Concrete

WK53490 Standard Specification for Uncoated, Weldless, 2-Wire and 3-Wire Steel Strand for Prestressed Concrete

WK53466 Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use

WK53469 Standard Specification for Steel Forgings, General Requirements

WK52114 Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels

WK53434 Standard Specification for Copper Alloys in Ingot Form

WK53441 Standard Specification for General Requirements for Copper Alloy Castings

WK53442 Microblend Fuel Blendstock for Middle Distillate Fuels

WK53412 Standard Guide for Measuring Physical and Rheological Properties of Radioactive Solutions, Slurries, and Sludges

WK53413 Standard Test Method for Distribution Coefficients of Inorganic Species by the Batch Method

WK53414 Standard Test Method for Determining Liquidus Temperature of Immobilized Waste Glasses and Simulated Waste Glasses

WK53375 Standard Test Method for Bulk Density (Unit Weight) and Voids in Aggregate

WK53331 Standard Master Matrix for Light-Water Reactor Pressure Vessel Surveillance Standards, E706(0) (Withdrawn 2011)

WK49960 Standard Practice for Preparation of Metal and Alloy Samples by Electric Arc Remelting for the Determination of Chemical Composition

WK53363 Standard Guide for Determination of Plutonium and Neptunium in Uranium Hexafluoride by Alpha Spectrometry

WK51293 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range

WK53355 Standard Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials

WK50140 Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling

WK50141 Standard Specification for Structural Steel for Bridges

WK53325 Standard Test Methods for pH of Water

WK53321 Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures

WK49346 Turf Grass Seed

WK53302 Standard Test Method for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids

WK53311 Standard Test Methods for Detector Calibration and Analysis of Radionuclides

WK53290 Standard Guide for Use of Protective Coating Standards in Nuclear Power Plants

WK53278 Standard Test Method for Evaluating Coatings Used in Light-Water Nuclear Power Plants at Simulated Design Basis Accident (DBA) Conditions

WK53292 Standard Test Method for Surface Burning Characteristics of Building Materials

WK53293 Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics

WK53294 Standard Test Method for Surface Burning Characteristics of Building Materials

WK53295 Standard Test Method for Surface Burning Characteristics of Building Materials

WK53296 Standard Test Method for Surface Burning Characteristics of Building Materials

WK53297 Standard Test Method for Surface Burning Characteristics of Building Materials

WK53298 Standard Test Method for Surface Burning Characteristics of Building Materials

WK53299 Standard Test Method for Surface Burning Characteristics of Building Materials

WK53300 Standard Test Method for Surface Burning Characteristics of Building Materials

WK53188 Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F)

WK53189 Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F

WK53190 Standard Guide for Construction of a Sounding Tube and Striker Plate for Tank Sounding

WK53191 Standard Specification for Water Trap for Diesel Exhaust

WK53192 Standard Specification for Mechanically Refrigerated Shipboard Air Conditioner

WK53193 Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services

WK53194 Standard Specification for Special Requirements for Valves Used in Gaseous Oxygen Service

WK53195 Standard Specification for Automatic Shut-Off Valves (Also Known as Excess Flow Valves, EFV) for Air Or Nitrogen Service

WK53196 Standard Specification for Hand-Operated, Globe-Style Valves for Gas (Except Oxygen Gas), and Hydraulic Systems

WK53215 Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations

WK53216 Standard Test Method for Hydrogen In Petroleum Fractions

WK53217 Standard Test Methods for Phosphorus in Lubricating Oils and Additives

WK53218 Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry

WK53219 Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy

WK53220 Standard Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants

WK53227 Standard Test Method for On-Line Measurement of Residue After Evaporation of High-Purity Water

WK49950 Standard Specification for Oxygen-Free Copper in Wrought Forms for Electron Devices

WK47674 Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry

WK53166 Standard Practice for Soil Exploration and Sampling by Auger Borings

WK53170 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil

WK53124 Standard Practice for Sampling Surface Soil for Radionuclides

WK53126 Standard Practice for Soil Sample Preparation for the Determination of Radionuclides

WK53127 Standard Guide for High-Resolution Gamma-Ray Spectrometry of Soil Samples

WK53128 Standard Guide for Determination of Neptunium-237 in Soil

WK53132 Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark Ignition Fuels

WK53137 Standard Specification for Nuclear-Grade Silver-Indium-Cadmium Alloy

WK53138 Standard Specification for Nuclear-Grade Aluminum Oxide Powder

WK53141 Standard Test Methods for Downhole Seismic Testing

WK53145 Standard Specification for Nuclear-Grade Aluminum Oxide-Boron Carbide Composite Pellets

WK53146 Standard Specification for Nuclear-Grade Boron Carbide Pellets

WK53108 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)

WK53095 Standard Practice for Soil Exploration and Sampling by Auger Borings

WK53100 Standard Test Method for Determination of Metallic Impurities in Uranium Metal or Compounds by DC-Arc Emission Spectroscopy

WK53105 Standard Specification for Nuclear-Grade, Sinterable Uranium Dioxide Powder

WK53116 Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity/Infrared Detection Method

WK53090 Standard Test Method for Torsional Ring Shear Test to Determine Drained Fully Softened Shear Strength and Nonlinear Strength Envelope of Cohesive Soils (Using Normally Consolidated Specimen) for Slopes with No Preexisting Shear Surfaces

WK53094 Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading

WK53066 Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked

WK53067 Standard Specification for Carbon Steel Crane Rails

WK53048 Standard Test Method for Determination of Copper in Anode and Blister Copper (Withdrawn 2016)

WK53003 Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils (Withdrawn 2016)

WK53032 Standard Test Methods for Chemical Analysis of Copper Alloys

WK52972 Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens

WK52973 Standard Specification for Air-Entraining Admixtures for Concrete

WK52974 Standard Specification for Foaming Agents Used in Making Preformed Foam for Cellular Concrete

WK52953 Standard Specification for Ready-Mixed Concrete

WK52954 Standard Specification for Ready-Mixed Concrete

WK52957 Standard Practice for Characterizing Neutron Exposures in Iron and Low Alloy Steels in Terms of Displacements Per Atom (DPA), E 706(ID)

WK52958 Standard Guide for Application of Neutron Transport Methods for Reactor Vessel Surveillance, E706 (IID)

WK52949 Standard Test Method for Surface Burning Characteristics of Building Materials

WK52950 Standard Test Method for Surface Burning Characteristics of Building Materials

WK52951 Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics

WK52943 Standard Specification for Reactive and Refractory Metal Clad Plate

WK52935 Standard Test Method for Particle Size Distribution of Granular Activated Carbon

WK52936 Standard Test Method for Ball-Pan Hardness of Activated Carbon

WK52937 Standard Test Method for Determination of Butane Working Capacity of Activated Carbon

WK52939 Standard Test Method for Determination of Butane Activity of Activated Carbon

WK52924 Standard Test Method for Performance Testing of Excess Flow Valves

WK52491 Standard Specification for Castings, Austenitic, for Pressure-Containing Parts

WK52896 Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products

WK36488 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils

WK52887 Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials

WK52888 Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry

WK50325 Standard Specification for Fuel Oils

WK34026 Standard Test Method for Determining Thermal Neutron Reaction Rates and Thermal Neutron Fluence Rates by Radioactivation Techniques

WK34027 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Nickel

WK34028 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Titanium

WK34030 Standard Test Method for Measuring Reaction Rates by Radioactivation of Neptunium-237

WK34032 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Niobium

WK42623 Standard Specification for Fuel Oils

WK42597 Steel Castings, Creep-Strength Enhanced Ferritic Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service

WK52843 Standard Specification for Steel Fibers for Fiber-Reinforced Concrete

WK52844 Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement

WK52823 Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products

WK52845 Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete

WK52846 Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete

WK52807 Standard Practice for Petrographic Examination of Hardened Concrete

WK52805 Standard Practice for Calibration of Type S Pitot Tubes

WK52801 Standard Test Method for Characterizing the Pressure Drop and Filtration Performance of Cleanable Filter Media

WK52789 Standard Practice for Ultrasonic Examination of Steel Forgings

WK52790 Standard Practice for Ultrasonic Examination of Steel Forgings

WK24211 Determination of Hg Adsorption Capacity of Powdered Activated Carbons Used for Removal of Hg from Flue Gas

WK52794 Standard Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers

WK50812 Standard Guide for Maintenance and Rehabilitation of Groundwater Monitoring Wells

WK52795 Standard Specification for Ready-Mixed Concrete

WK48253 Steel Casing Pipe, Electric-Fusion (Arc)-Welded (Outside Diameter of 10 In and Larger)

WK52773 Standard Guide for Installation of Direct Push Groundwater Monitoring Wells

WK52750 Standard Test Method for Chlorine in New and Used Petroleum Products (High Pressure Decomposition Device Method)

WK52751 Standard Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method)

WK52753 Standard Test Method for Salts in Crude Oil (Electrometric Method)

WK52754 Standard Test Method for Lead in Gasoline - Iodine Monochloride Method

WK52758 Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis

WK52759 Standard Test Method for Salt in Crude Oils (Potentiometric Method)

WK52760 Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry

WK52761 Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry

WK52762 Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis

WK52767 Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp)

WK52307 Seamless Cold-Finished Carbon Steel Structural Frame Tubing for Automotive Racing Applications

WK52430 Anti-Washout Admixtures for Concrete

WK48721 Un-notched, Constant Ligament Stress Crack Test (UCLS) for HDPE Materials Containing Post-Consumer Recycled HDPE

WK52741 Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

WK52740 Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing

WK52739 the Determination of Carbon (Total) Content in Mixed Oxide ((U, Pu)O2) Sintered Pellets by Direct Combustion-Infrared Detection Method

WK52729 Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete

WK52730 Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete

WK52728 Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete

WK52715 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service

WK51814 Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service

WK52707 Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes

WK52710 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes

WK52686 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials

WK52688 Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

WK52661 Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels

WK52680 Standard Specification for Carbon Steel Forgings for Piping Applications

WK52662 Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels

WK52663 Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force

WK52664 Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications

WK52673 Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques

WK52674 Standard Test Method for Measuring Neutron Fluence Rates by Radioactivation of Cobalt and Silver

WK52632 Standard Specification for Textured Stainless Steel Sheet [Metric]

WK52631 Standard Specification for Seamless Stainless Steel Mechanical Tubing

WK52610 Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367), Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625), Nickel-Chromium-Iron Alloys (UNS N06600 and N06690), and Nickel-Chromium-Iron-Columbium-Molybdenum (UNS N07718) Alloy Pipe Flanges, Fittings, Valves, and Parts

WK52600 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory

WK52627 Standard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service

WK52628 Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range

WK50271 Standard Test Method for Centrifuge Moisture Equivalent of Soils

WK52587 Standard Test Method for Shrinkage Factors of Soils by the Wax Method

WK52578 Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications

WK52579 Standard Practice for Determination of Elements by Graphite Furnace Atomic Absorption Spectrometry

WK52573 Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper

WK52574 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer

WK52563 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe

WK52575 Standard Test Method for Marsh Funnel Viscosity of Clay Construction Slurries

WK24244 Guided Side Bend Testing of Polyethylene Pipe Butt Fusion Joints

WK52520 Standard Guide for Qualification and Control of Induction Heat Treating

WK52526 Standard Practice for Reducing Samples of Aggregate to Testing Size

WK52549 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube

WK42681 Standard specification for pressure vessel plates, alloy steel, austenitic high manganese for cryogenic applications

WK52501 Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service

WK52498 Standard Specification for Steel Forgings, Alloy, for Carburizing Applications

WK52499 Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors

WK51815 Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe

WK52467 Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts

WK52474 Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service

WK52476 Standard Specification for Austempered Ductile Iron Castings

WK52485 Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use

WK52486 Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings

WK52489 Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines

WK52490 Standard Specification for Pressure Vessel Forgings, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten for Elevated Temperature Service