|
P T S Laboratories, Inc.,
Santa Fe Springs
|
Analyses and simulations for Risk Based Corrective Action (RBCA) applications. Finger printing of hydrocarbons and core analysis, along with field service and long term core storage. Core photography, white light and UV.
|
P. E. La Moreaux and Associates,
Tuscaloosa
|
State certified: water, environmental, soil, solid waste, rocks, and minerals.
|
P. E. La Moreaux and Associates,
Lakeland
|
State certified: water, environmental, soil, solid waste, rocks, and minerals.
|
P. T. Soilens,
Bandung
|
Soil, asphalt, and cement concrete testing for civil engineering works, inspection, analysis, consulting, engineering.
|
PAR Laboratories, Inc.,
Charlotte
|
Quality work, environmental HAZMAT, alloys, fuels, consulting, field testing.
|
PFS Corp.,
Madison
|
Surface flame spread, structural fire resistance, building materials, components, assemblies, safety, and environmental effects.
|
PLSA Engineering & Surveying,
Yakima
|
Perform most commonly used soil, asphalt paving, and concrete tests, and UBC Chapter 17 tests and special inspections.
|
PRA Laboratories,
Ypsilanti
|
Complete analytical and formulation in support of organic coatings.
|
PRI Asphalt Technologies, Inc.,
Tampa
|
Independent third party lab evaluations, product certifications. AASHTO accreditation for conventional and Superpave binders and mixes. ICBO & Metro-Dade Accredited for roofing and waterproofing products, including: Wind Driven Rain (PA-100 (A), Wind Uplift (PA-108), Impact Resistance (Hail) (UL-2218), MB Membranes, all coatings, cements, adhesives, aluminums, all shingles and commercial rolls.
|
PTL Testing Laboratory, Inc.,
Trenton
|
Chemical analysis of ores, metals, and alloys. Precious metals and full solder/babbitt analysis are specialties. Representation at refineries, etc, Mobile NDT personnel serving ski areas, amusement industry, bridge and aboveground tank inspection.
|
Pacific Soils Engineering & Testing,
|
Geotechnical consultant, soil, cement, concrete, and asphalt testing. Soil investigations.
|
Pacific Testing Laboratories, Inc.,
Valencia
|
Plastics, composites, metals, coating, failure analysis, printed wiring board, military qualification.
|
Package Research Laboratory,
Rockaway
|
UN/DOT, ISTA, NMFC, Military, Package-Product Testing, Environmental conditioning, corrugated fiberboard analysis, heat seal strength.
|
Package Testing Services,
St. Paul
|
Package testing and evaluation including industrial containers.
|
Packaging Development Service, Inc.,
Broomfield
|
Product fragility, packaging design and testing (ISTA, ASTM, MIL, and DOT tests).
|
Panair Laboratory, Inc.,
Miami
|
Aircraft fuels and hydraulic fluids, gasoline, lubricants, fuel oils.
|
Panametrics, Inc.,
Waltham
|
High-resolution ultrasonic imaging using our 400 MHz Multiscan system.
|
Par/Tec Laboratories,
Allendale
|
Particle size distributions, dispersibility, dustiness of powders are measured, compared.
|
Particle Characterization Laboratory,
Miami
|
Full line of particle characterization, including sizing, counting, surface change and area.
|
Patrick Engineering,
Lisle
|
Geotechnical testing of soil and rock, field and laboratory testing.
|
Peak Analytical, Inc.,
Friendswood
|
Specialty separations by ion chromatography, capillary electrophoresis, HPLC, IC/ICPMS, sample analysis by IC, HPLC, CE, ICP including trace analysis for chemical, petrochemical, semiconductor and environmental.
|
Pedneault Associates, Inc.,
Bohemia
|
Commercial environmental testing lab with multi-state certification.
|
Penniman & Browne, Inc.,
Baltimore
|
Full-service environmental analysis, sampling, testing and auditing, geotechnical and CMET engineering. Industrial hygiene: lead sampling and analysis by XRF, ICP and AA; non-prescription drugs stability analysis.
|
PerkinElmer Automotive Research, Inc.,
San Antonio
|
Over 100 engine dynamometer stands available for engine durability, engine component testing, lubricants testing, and fuels testing. Capability to perform over 200 ASTM petroleum analytical methods. Fleet testing, vehicle based fuels testing, and management of commercial fleets is available. Evaporative emission, permeation, and materials testing of automotive fuel system components and fuel fill systems.
|
Perritt Laboratories, Inc.,
Hightstown
|
Perritt Laboratories is an internationally accredited, FDA registered, independent laboratory performing microbiological and child-resistant package testing for the pharmaceutical, cosmetic and healthcare industries. We specialize in testing products/raw materials, facilities (air and surfacces), and water systems. Child-resistant package testing is conducted according to US and international guidelines.
|
Peryam & Kroll Research Corp.,
Chicago
|
Sensory evaluation of products; aroma, flavor, texture, performance.
|
Peryam & Kroll Research Corp.,
Plano
|
Sensory evaluation of products; aroma, flavor, texture, performance.
|
Peryam & Kroll Research Corp.,
Anaheim
|
Sensory evaluation of products, aroma, flavor, texture, performance.
|
Petro-Lubricant Test Labs., Inc.,
Lafayette
|
ASTM, Federal test method, and NLGI methods of analysis for oils, greases, and hydraulic fluids.
|
Petroleum Analyst, Inc.,
Scott
|
Testing and consulting for the natural gas and petroleum industry; certified calibration standards.
|
Petroleum Sciences, Inc.,
Spokane
|
Asphalt testing, design and control work for paving industry.
|
Pharmaceutical Systems, Inc.,
Mundelein
|
Sterility.
|
Pharmichem Testing Services, Inc.,
Tinley Park
|
QC for pharmaceuticals, chemicals, foods, cosmetics.
|
Phoenix Chemical Laboratory, Inc.,
Chicago
|
Analysis, research, development: fuels, lubricants, hydraulic fluids, greases, coatings, petrochem, additives, solvents, rust preventives including measurement of chemical and physical properties performance expectancy.
|
Phoenix National Laboratories, Inc.,
Tempe
|
Complete laboratory and jobsite construction materials testing and inspection services including: soil, aggregate, concrete, asphalt, mechanical, nondestructive, structural steel/weld inspection, welder qualification/certification and highway bridge elastomeric bearing pad testing.
|
Plant Bioactives Research Institute,
Orem
|
Analysis of medicinal plants (herbs), vegetables, enzymes, amino acids, vitamins and natural product derived compounds.
|
Plastics Engineering Laboratories,
Lawrenceville
|
Thermomechanical testing and analysis of polymeric materials and products. Product design and development, failure analysis and forensic services. Lifetime projections, material selection, mold proof process and product inspection, product application qualification.
|
Plastics Technology Laboratories, Inc.,
Pittsfield
|
Independent testing laboratory deficated to plastics, elastomers, composites and polymers with extensive knowledge and expertise in all respects of plastics testing. The labs provide analytical, mechanical, electrical, thermal, optical and rheological testing for everything from material identification to quality programs to failure analysis. ISO 9002 certified, A2LA (ISO 25) accredited.
|
Polyhedron Laboratories, Inc.,
Houston
|
Plastics, polymers, rubber, chemical, thermal, physical, FTIR, mechanical, microscopy, chromatography. Failure analysis, quality assurance, aging, chemical resistance, and combustion products. Laboratory compounding (extrusion and pelletizing).
|
Polymer Diagnostics, Inc.,
Avon Lake
|
For 50 years, PDI has been a comprehensive research and development facility providing plastic testing and polymer consulting services. Our focus is on providing our customers real solutions in the areas of polymer technology and consulting, chemical analysis and microscopy, mechanical and physical properties testing, vinyl technology, and fire sciencce.
|
Polytherm Testing Laboratory,
Clawson
|
Material characterization by thermal, chemical, and infrared analytical techniques. Lab assessments.
|
Powder-Tech Associates, Inc.,
North Andover
|
Evaluation of powder metallurgy parts and testing of P/M parts and powders. Failure analysis based on experience in making P/M parts. Reverse engineering.
|
Powertech Labs, Inc.,
Surrey
|
Powertech has 18 laboratories which provide a one-stop analysis service for industry and manufacturers. We specialize in testing and evaluating: electrical equipment, cables, insulators, oil and lube, contaminants, dams, machines, protective coatings, soil and concrete, NGV cylinders.
|
Precision Geosynthetic Laboratories,
Orange
|
Material testing laboratory specializes in geosynthetics.
|
Precision Geosynthetic Laboratories,
Orange
|
Third-party lab; geosynthetic material testing of liners, textiles, nets, grids, pipes and general plastics.
|
Preformed Line Products Co.,
Mayfield Village
|
Mechanical and vibration testing of cable and hardware. Specializing in testing of optical cables such as OPGW and ADSS.
|
Product Safety Consulting, Inc.,
Bensenville
|
Evaluation and testing for safety approval compliance (i.e., UL, CSA, etc.)
|
Professional Metallurgical Services,
Buchanan
|
Metallurgical failure analysis, material testing, casting defect analysis, foundry process consulting, litigation support in the above area.
|
