ASTM WK39876

    New Specification for Returned Fresh Concrete for Use in a New Batch of Ready-Mixed Concrete

    (What is a Work Item?)

    Developed by Subcommittee: C09.40 | Committee C09 | Contact Staff Manager



    WK39876

    1. Scope

    1.1 This specification covers returned fresh concrete for use in a new batch of ready-mixed concrete. Requirements for returned fresh concrete shall be either as hereinafter specied or as specied by the purchaser. In any case in which the requirements of the purchaser differ from those in this specication, the purchasers requirements shall govern. This specication does not cover the placement, consolidation, curing, or protection of the concrete after delivery to the purchaser. 1.2 This specification by itself shall not grant permission to the manufacturer to use returned fresh concrete in a new batch of concrete. NOTE 1-The permission to use returned fresh concrete may be addressed in purchase documents, which may reference this specification. 1.3 Returned fresh concrete in a quantity of less than 450 kg [1000 lb] or 0.2 m3 [0.25 yd3] shall not be subject to this specification. 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.5 The text of this standard references notes and footnotes, which provide explanatory information. These notes and footnotes shall not be considered as requirements of the standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. (WARNING-Fresh hydraulic cementitious mixtures are caustic and may cause chemical burns to skin and tissue upon prolonged use.)


    Keywords

    ready-mixed concrete; testing; mixing; returned fresh concrete

    The title and scope are in draft form and are under development within this ASTM Committee.

    Citing ASTM Standards
    Back to Top
    Work Item Status

    Date Initiated:
    12-03-2012

    Technical Contact:
    Eric Koehler

    Item:
    019

    Ballot:
    C09 (15-03)

    Status:
    In Balloting