ASTM WK38166

    Work Item: ASTM WK38166 - New Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains.

    (What is a Work Item?)

    Developed by Subcommittee: C13.07 | Committee C13 | Contact Staff Manager



    1. Scope

    1.1 This specification covers single-cell precast conventionally reinforced concrete three-sided structures intended to be used for the construction of culverts and for the conveyance of storm water. 1.2 A complete metric companion to Specification C 1504 has been developed-C 1504 M; therefore, no metric equivalents are presented in this specification. NOTE 1-This specification is primarily a manufacturing and purchasing specification. The successful performance of this product depends upon the proper selection of the geometric section, bedding, backfill, and care that the installation conforms to the construction specifications. The purchaser of the precast reinforced concrete three-sided structure specified herein is cautioned that proper correlation of the loading conditions and the field requirements with the geometric section specified and provisions for inspection at the construction site are required. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.


    Keywords

    Three-sided structure, LRFD, AASHTO

    The title and scope are in draft form and are under development within this ASTM Committee.

    Citing ASTM Standards
    Back to Top
    Work Item Status

    Date Initiated:
    07-03-2012

    Technical Contact:
    Balaram Singh

    Status:
    Draft Under Development