ASTM WK23815

    New Test Method for Standard Screening Method for Organic Halides Contained in Hydrogen and other Gaseous Fuels1

    (What is a Work Item?)

    Developed by Subcommittee: D03.14 | Committee D03 | Contact Staff Manager



    WK23815

    1. Scope

    1.1 This method describes the screening of Organic Halide content of gaseous fuels using Electron Capture detection. Although, primarily intended for determining organic halides in hydrogen used as a fuel for fuel cell or internal combustion engine powered vehicles, this screening method can also be used, if qualified, to measure organic halides in other gaseous fuels and gaseous matrices. 1.2 The procedures described in this method were designed to screen organic halides in hydrogen to a level much less than required by SAE J2719 and the California Code of Regulations, Title 4, Division 9, Chapter 6, Article 8, Sections 4180 4181.

    These procedures described in this screening method were designed to satisfy halocarbon determination requirements contained in SAE J2719 and the California Code of Regulations, Title 4, Division 9, Chapter 6, Article 8, Sections 4180 4181. No other standard test methods exist.


    Keywords

    total halogenated hydrocarbon screening; PEM fuel cells; hydrogen quality

    The title and scope are in draft form and are under development within this ASTM Committee.

    Citing ASTM Standards
    Back to Top
    Work Item Status

    Date Initiated:
    04-13-2009

    Technical Contact:
    Daniel Bartel

    Status:
    Draft Under Development